Sunnydaze DECOR NPH-533 L-Shaped Galvanized Steel Raised Garden Bed Instruction Manual
- June 1, 2024
- Sunnydaze DECOR
Table of Contents
Sunnydaze NPH-533 L-Shaped Galvanized Steel Raised Garden Bed
Specifications
- Product Name: L-SHAPED GALVANIZED STEEL RAISED GARDEN BED
- Material: Galvanized Steel
- Dimensions: Customizable based on assembly
- Warranty: 1 year
Product Usage Instructions
Assembly:
Review all assembly steps before starting. Assemble components on a soft,
clean surface to prevent damage to the finish.
-
Step 1:
Identify rolled edges of panels; ensure they face inside the garden bed. Attach End Panel (C) to Corner (D) using M6x10mm Bolts (E) and Wing Nuts (F). -
Step 2:
Repeat step 1 for both end panels. Attach Long Panel (A) to corner using bolts and nuts. Secure Medium Panel (B) to the opposite side of the end panel. Repeat for all panels. -
Step 3:
Connect long panels using Corner (D), bolts, and nuts. Fasten the corner piece to the medium panels. Fully tighten all hardware once all components are assembled.
Use & Care:
Minor discoloration and surface rust may occur, but should not affect the
product’s integrity. Avoid modifications and follow recommended care to
maintain warranty.
Safety Statements & Warnings:
Any modifications or failure to follow care instructions will void the
warranty. Contact customer service for assembly issues or shipping damages.
FAQ
-
How do I register my warranty?
Register your warranty at https://tiny.cc/SunnydazeWarranty -
What tools are required for assembly?
Phillips Screwdriver -
What do I do if parts are missing?
Contact customer service with your order information for assistance.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the
quality of the items we sell. Replacement parts or products will be sent at
our discretion within the 1-year warranty period. Proof of purchase, with the
date of purchase as well as photos of the merchandise defect, must be
provided. Photos are used to determine the cause of defects and for future
quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by
phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com,
or via our contact us page at https://tiny.cc/SunnydazeContact
Part list
Tools Required (not included)
WARNING
CHOKING HAZARD — This item contains small parts that can be swallowed. Keep
children and pets away during assembly.
ASSEMBLY
Review all steps and understand assembly before beginning.
Do not fully tighten hardware until all components have been loosely
assembled.
-
STEP 1
IMPORTANT: Identify the rolled edges of the panels and ensure they are installed facing the inside of the garden bed.- Align End Panel (C) with Corner (D) and secure using four M6x10mm Bolts (E) and Wing Nuts (F).
- Repeat until both end panels have corners installed on each side.
- STEP 2
- Ensuring the rolled edges are facing the inside of the garden bed, align one Long Panel (A) with the corner, as shown, and secure using four bolts and wing nuts.
- Then, loosely fasten Medium Panel (B) to the opposite side of the end panel.
- Repeat this step with the remaining long and medium panel.
- STEP 3
- Loosely connect the long panels using one Corner (D), eight bolts and wing nuts.
- Ensuring the corner piece is facing inward, loosely fasten the last corner to the medium panels.
- After all components are loosely assembled, fully tighten all hardware.
USE & CARE
- This garden bed provides ergonomic access to plants and can eliminate the need to till the soil each year as long as the soil is not packed down. Avoid stepping inside the bed!
- Prepare the site before installation. Level the ground and remove existing vegetation. Landscaping fabric can be used under the beds; a double layer is recommended for beds placed directly on a lawn.
- A layer of gravel or stone can be used at the bottom for improved drainage.
- Loosely hand-tighten all nuts and bolt sets first, position the bed, then tighten. After assembly, check that all fastening points are fully secured.
- Galvanized metal beds do not require maintenance and are built to withstand years of exposure to outdoor elements.
- The galvanized finish protects the steel from corrosion. Over time, galvanized steel will fade, and some discoloration is normal. Minor surface rust on edges and hardware is to be expected and should not affect the structural integrity of the product.
SAFETY STATEMENTS & WARNINGS
- Wear gloves during assembly to prevent personal injury.
- Do not stand on, or lean objects against the bed wall. Doing so may damage the product.
- Do not let children play in or around the garden bed.
- Using this item for applications other than gardening will void the product warranty.
- Any modification to the product or failure to follow recommended care will void the product warranty.
- If you experience issues with assembly or the product was damaged during shipping,
- please contact our customer service team through one of the methods mentioned at the top of page 1.
- Please have the item number and order information ready to expedite response time.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal
injury, property damage or loss, whether direct or indirect, or incidental,
resulting from the incorrect attachment, improper use, inadequate maintenance,
or neglect of this product.