SDHQ-53-1139-G3 2014-21 Toyota Tundra Switch Pros RCR-12 Overhead Keypad Mount Instructions
- June 3, 2024
- SDHQ
Table of Contents
SDHQ-53-1139-G3 2014-21 Toyota Tundra Switch Pros RCR-12 Overhead Keypad
Mount
INSTALLATION INSTRUCTIONS
Product: SDHQ-53-1139-G3(-SOS)
Description: 2014-21 Toyota Tundra Switch Pros RCR-12 Overhead Keypad
Mount
| Parts List | Hardware List | Required Tools |
|---|
-
SDHQ Tundra Switch Pros OH Keypad Mount
Without SOS SDHQ- 53-1139-G3
With SOS SDHQ -53-1139-G3-SOS -
Hardware Package SDHQ -53-1139-G3-HP
| #6 – 32 x 3/16” S.S. Button
Head Bolts| Plastic Panel Remover 5/64” Hex Drive Thread Locker
(Medium)
Tech Notes
SDHQ-53-1139-G3(-SOS) panels only fits the 2014-21 Tundra without a
sunroof.
Approx install time = 15 Minutes (not including wiring)
-
Unbox your SDHQ Tundra Switch Pros RCR-Force-12 Overhead Keypad Mount and hardware.
-
Remove the factory overhead panel. Using a plastic panel removal tool, remove the square plastic panel. Pry along the edges of the panel, being careful not to scratch the plastic. If applicable, disconnect the SOS button from the wiring and then remove it from the panel.
-
Installing the Keypad. Place the RCR-Touch cover onto the RCR-Force-12 Keypad. Feed the wire harness through the center hole in the SDHQ Overhead Keypad Mount and insert the Keypad. Secure the Keypad with the supplied (4) #6 Button Head Bolts and thread locker. Install the SOS button as pictured, if applicable.
-
Once finished and wiring has been ran, install the panel in the reverse order as removed. The new panel is a tight fit, it may help to use your panel removal tool to guide the edges in place. Enjoy your new SDHQ Built Switch Pros RCR-Force-12 Overhead Console Mount!
For questions or help with the installation, please call SDHQ Off road @ 480-633-2929 Mon.–Fri. 8:00am–5:30pm and Sat. 8:00am–3:30pm Arizona Time. www.sdhqoffroad.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>