Grupo Ruz A2024 Holiday Express Animation Train Instruction Manual

Grupo Ruz A2024 Holiday Express Animation Train

Holiday Express
Age Range:  Ages 8+

INTRODUCTION

Congratulations on your purchase of the Holiday Express Train. Please read all instructions and warnings in this sheet prior to using your train. Keep this instruction sheet as it contains important information for future reference.

CONTENTS

• Locomotive
• Character Car
• Freight Car
• Caboose
• Remote Control
• 20 Pcs Straight Tracks
• 24 Pcs Curved Tracks

ASSEMBLY

Adult assembly and supervision required at all times.

1. For easiest assembly, connect track pieces together on the ground.
   Use 24 curved tracks to assemble a 4-ft circle.
   Use 24 curved & 20 straight tracks to form a 9-ft oval track.

2. Remove demo batteries and install new batteries.

   • Use a screwdriver to remove the battery cover.
   • Insert 4 “AA” batteries in the polarity shown.
   • Put the battery cover back in place.

3. Place cars and locomotives on top of tracks. Connect them as shown above.

4. Make sure the lip of all of the rail wheels is on the inside of the corresponding track.

   • Use a screwdriver to remove the battery cover.(Screwdriver not included)
   • Insert 2 “AA” batteries in the polarity shown.
   • Put battery cover back in place.

Track Assembly Diagrams
The diagrams show three different track formations:

• 4ft circle using 24 curved tracks.
• 9ft oval using 24 curved & 20 straight tracks.

BATTERY WARNING

• Do not mix old and new batteries or rechargeable batteries.
• Remove batteries when not in use.
• Batteries are to be inserted according to the polarity (+/-).
• Do not short-circuit the supply terminals.
• Non-rechargeable batteries are not to be recharged; do not dispose of batteries in fire; they may explode or leak.
• Only use the specified battery type. Always use, replace, and recharge (if applicable) batteries under adult supervision. Keep this package for reference as it contains important information.

OPERATION INSTRUCTIONS

Pairing:

• Switch ON the power on the Locomotive. The locomotive will “beep” twice and the light on the front of the locomotive will flash at the same time.
• Press and hold the ON/OFF button on the remote control for 3 seconds (the red indicator light on the remoter will illuminate). if pairing is successful, the locomotive will “beep” once and the front light will change to steady on.
• If pairing fails, the light on the front of the locomotive will switch to flashing. Turn off both the locomotive and the remote control. Begin pairing process again.

Operation:

• Turn the indicator on the rotary knob to the 12 o’clock position. Short press the ON/OFF button on the remote control. The locomotive will start.
• Slowly rotate the knob clockwise and the train will begin to move forward. As you continue to rotate the knob, the train will increase its speed. To slow the speed of the train, slowly rotate the knob counter clockwise. Rotating all the way back to the 12 o’clock position will stop the train.
• Continue rotating the knob in the counterclockwise direction to make the train run backwards.
• Press the left button for train whistle.
• Press the right button to mute or unmute.
• Short press the ON/OFF button at any time to pause the train or resume movement. Press and hold the ON/OFF button on the remote control for 3 seconds to turn off the remote control.

Locomotive

Remote Control:

• Indicator Light
• Rotary knob adjusts speed:
  • Rotate Clockwise to move forward.
  • Rotate Counterclockwise to move in reverse.
• On/Off Button:
  • Short press to start / pause the train.
  • Long press to turn On/Off the remote control whistle button.

WARNINGS – PLEASE READ CAREFULLY BEFORE USE

• NEVER LEAVE THIS PRODUCT UNATTENDED DURING USE.
• TO AVOID DAMAGING ITEMS OR NEARBY OBJECTS OR PEOPLE, CLEAR ALL OBSTRUCTIONS AND ALWAYS PLACE TRACKS ON A HARD FLAT SURFACE.
• INSPECT THE TRAIN AND THE TRACKS BEFORE EVERY USE. IF THERE ARE ANY CRACKS OR BROKEN PARTS, DISCONTINUE USE AND DISCARD IMMEDIATELY.
• USE TRAIN ONLY IN CONJUNCTION WITH PROVIDED TRACK.
• ADULT ASSEMBLY AND SUPERVISION REQUIRED AT ALL TIMES.
• BEWARE OF SHARP EDGES AND OTHER FUNCTIONAL SHARP POINTS.

WARNING : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for FCC compliance could void the user’s authority to operate the equipment or to operate in conjunction with any other antenna or transmitter.

Specifications

GRUPO RUZ, S.A. DE C.V. 126 MAIN ST, SAG HARBOR, NEW YORK, NY 11963-3007, USA
www.gruporuz.com.mx
SKU#563529 / MODEL# A27872
Follow us on Social Media!
RUZUSAOFFICIAL
wondapop

FAQ

What should I do if my train is not working?
Ensure that the batteries are inserted correctly and that the tracks are free of obstructions. If the problem persists, consult the instruction manual and check for any visible damage to the train or tracks.

Can I use rechargeable batteries with my Holiday Express Train?
Yes, but ensure they are the correct type and always recharge under adult supervision. Do not mix rechargeable and non-rechargeable batteries.

How do I pair the remote control with the locomotive?
Turn on the locomotive and press and hold the ON/OFF button on the remote control for 3 seconds. A successful pairing will be indicated by a single “beep” from the locomotive.

What should I do if there is interference with my train’s operation?
Try to correct the interference by reorienting the receiving antenna, increasing separation between the equipment and receiver, or consulting with an experienced technician.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>