Shenzhen 2BDHW-CRWXCZJ Liftable Wireless Charging Laptop Stand User Manual
- June 15, 2024
- Shenzhen
Table of Contents
The Laptop Stand With Wireless Charging And
Adjustable Height Features
User manual
Introduction
Dear user,thank you for purchasingthis product.
In order for you to further understand and experience this product , please
read this manual carefully before using. Wish you havea pleasant experience!
Packing list
Product diagram
- Panel
- Telescopic rod
- Rotary knob
- Non-slip silicone
- Wireless charging
- Baseplate
Assembly steps
Remove the tools and screws from the accessory bag.
-
Align the knob with the inner telescopic rod hole and screw it in
-
Align the bottom plate with the telescopic rod.
-
Tighten the screws with a wrench.
-
Align the panel with the telescopic rod.
-
Tighten the screws with a wrench.
-
Rotate the knob to the left and adjust height.
Instructions
- Connect the stand and your adapter with the attached A-to-C charging cable.
- Put the device that supports wireless charging on the top of charging base to achieve wireless charging up to 15W.
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
2, Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules, These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications, However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled environment. This equipment should beinstalled and operated with
minimum distance 20cm between the radiator and your body.
THANK YOU!
Documents / Resources
|
Shenzhen 2BDHW-CRWXCZJ Liftable Wireless Charging Laptop
Stand
[pdf] User Manual
2BDHW-CRWXCZJ, 2BDHWCRWXCZJ, 2BDHW-CRWXCZJ Liftable Wireless Charging Laptop
Stand, 2BDHW-CRWXCZJ, Liftable Wireless Charging Laptop Stand, Wireless
Charging Laptop Stand, Charging Laptop Stand, Laptop Stand, Stand
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>