VISUAL COMFORT CHA 9591 Briar Large Floor Lamp Installation Guide
- June 3, 2024
- VISUAL COMFORT
Table of Contents
CHA 9591 Briar Large Floor Lamp
Installation Guide
ASSEMBLY INSTRUCTIONS
Briar Large Floor Lamp
Item # CHA 9591
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with its construction and
operation of it, as well as the hazards involved. Inspect items and contents
carefully. If any damage or defect is found, do not install it.
Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install harp (C) by squeezing it together and inserting it into the top of the saddle (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and install to harp (C) using finial (A).
NOTE : If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damage. -
Install the light bulb into the socket.
-
Remove the protective cover (E) from the plug.
-
Plug into an electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>