Bambu Lab PF002-M 3D Printers User Guide
- June 1, 2024
- Bambu Lab
Table of Contents
- PF002-M 3D Printers
- Bambu Lab
- Quick Start
- What’s In The Box
- Accessory Box
- Unlock
- Nozzle Wiper Installation
- Spool Holder Installation
- AMS lite Assembly
- AMS lite Assembly
- AMS lite Assembly
- Organizer Installation
- Powering On
- Network Setting
- Printer Binding
- Spool Loading
- *Warning
- Spool Loading
- External Spool (for non-AMS use case)
- First Print
- AMS lite Mapping
- Specification
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PF002-M 3D Printers
Bambu Lab
A1 Mini with AMS Lite
Quick Start
Please review the entire guide before operating the printer.
- Safety Notice: Do not connect to power until assembly is complete.
What’s In The Box
Accessory Box
Unlock
- Remove the 4 screws to unlock the Z-axis limiter.
- Cut the ziptie wrapped around the toolhead.
- Remove the foam padding
Nozzle Wiper Installation
Spool Holder Installation
AMS lite Assembly
AMS lite Assembly
AMS lite Assembly
Organizer Installation
Powering On
Network Setting
Printer Binding
Spool Loading
*Warning
- The AMS lite supports spools with a width of 40-68 mm and an inner diameter of 53-58 mm.
- Avoid using AMS lite to print flexible materials, including TPU, TPE, or absorbent PVA. Avoid using materials that are too hard (too high modulus) or too brittle (not enough toughness), including third-party fer reinforcement materials (PA-CF/GF, PET-CFIGF, PLA-CFIGF, etc). Please use external spool placement to print these filament.
Spool Loading
External Spool (for non-AMS use case)
First Print
AMS lite Mapping
Specification
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>