HIONEC B0BTYKSJRB Rechargeable Hearing Aids with Noise Cancelling User Guide
- June 10, 2024
- Hionec
Table of Contents
- HIONEC B0BTYKSJRB Rechargeable Hearing Aids with Noise Cancelling
- Hionec Fresh overview
- Accessories
- Technical parameters
- Power On/Off
- How to replace the earplug
- How to wear the hearing aids
- How to use
- How to charge
- How to replace the earwax filter
- Maintenance
- Troubleshooting
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HIONEC B0BTYKSJRB Rechargeable Hearing Aids with Noise Cancelling
Remove the stickers at the bottom of the Hionec Fresh before charging. Fully charge before use.
Hionec Fresh overview
Accessories
Technical parameters
Power On/Off
- Power On: Take the hearing aid out of the charging case or long-press the Volume Down button.
- Power Off: Return the hearing aid to the charging case or long-press the Volume Down button.
Distinguish left and right hearing aids according to the UR signs on the
hearing aids.
(L) is on the left of the charging case and
(R) is on the right.
Please remove the film label from the hearing aid before use.
How to replace the earplug
Hearing aids come with M-size earplugs. Choose a suitable size earplug to fit your ear canal.
- a) Turn the edge parts over.
- b) Hold the hearing aid and pull off the earplug.
- c) Hold the hearing aid with one hand.
- d ) Insert the earplug gently into the receiver.
- e) Pull the earplug gently to make
How to wear the hearing aids
- Gently insert the earplug into the ear canal.
- Place the hearing aid behind the ear. The curve of the sound tube should fit comfortably behind your ear.
- lf the earplug does not fit your ear canal, feedback (whistling sound) will happen. Choose a suitable earplug to avoid feedback.
How to use
Volume control
Press the Volume Up button to increase the volume. Press the Volume Down
button to decrease the volume. 2 beeps can be heard when the volume is max or
min.
Mode switching
Long press the Volume Up button for 3 seconds to switch between 3 scene modes.
And the switching sequence is 1-2-3-1.
- beep means mode 1 (Normal mode).
- beeps mean mode 2 (Noise cancelling mode).
- beeps mean mode 3 (Outdoor mode).
Restart the hearing aid and it will automatically restore to the volume level and the scene mode set last time.
How to charge
The hearing aid can be charged after being returned to the charging case. The charging case can provide an extra 60 hrs of listening time for 2 hearing aids. When the charging case runs out of power, use the provided charging cable to charge it.
Hearing aid | Charging case |
---|---|
Battery specifications | 20mAh Lithium Battery |
Battery
Charging time| s3h| s3h
Rated working time| “30h| 4 Times for Single Unrt 2 Times for Two Units
How to replace the earwax filter
Replace the earwax filter every 3 months. Do not reuse the used filter.
Remove the earplug first. Refer to “How to replace the earplug”. Gently insert the removal end of the tool into the sound tube. Pull out the previous earwax filter and discard it. Insert the new filter into the sound tube. Pull out the tool and leave the earwax filter on the sound tube.
Maintenance
After usage, clean the earplug and the sound tube with the cleaning brush, wipe off dirt with tissue paper, and store in a dry place with good ventilation.
- Clean the sound tube with the cleaning brush.
- Clean the microphone with the cleaning brush.
Troubleshooting
Consult your audiologist or contact us if the problem cannot be solved
Notes and tips
- This product is not waterproof.
- If the hearing aid is not used for a long time, please charge it every 1-2 months to ovoid damage to the battery.
- The charging coble provided in the package is only for hearing aids, please do not use it to charge other devices
- Store in a well-ventilated and dry place.
- Do not use in or near on X ray or MRI machine.
All pictures are for reference only
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>