Bambu Lab SA005 AMS Lite 3D Printer Instruction Manual
- June 2, 2024
- Bambu Lab
Table of Contents
Bambu Lab SA005 AMS Lite 3D Printer
Disclaimer and Warning
Thanks for purchasing a Bambu Lab product. The information in this document
affects your safety and your legal rights and responsibilities. Read this
entire document carefully to ensure proper configuration before use. Failure
to read and follow instructions and warnings in this document may result in
serious injury to yourself or others, damage to your Bambu Lab product, or
damage to other objects in the vicinity. This document and other collateral
documents are subject to change at the sole discretion of Bambu Lab.
By using this product, you hereby signify that you have read this disclaimer
and warning carefully and that you understand and agree you are solely
responsible for your own conduct while using this product, and for any
consequences thereof. You agree to use this product only for purposes that are
proper and in accordance with all applicable laws, rules and regulations, and
all terms, precautions, practices, policies, and guidelines Bambu Lab has made
and may make available. Bambu Lab accepts no liability for damage, or injury
or any legal responsibility incurred directly or indirectly from the use of
the product. The user shall observe safe and lawful practices including, but
not limited to, those set forth in this document.
Bambu lab is a trademark of Shenzhen Tuozhu Technology Co., Ltd. and its
affiliated companies. Names of products, brands, etc., appearing in this
manual are trademarks or registered trademarks of their respective owner
companies.
Before You Start
The following documents have been produced to help you safely operate and make
full use of your
Bambu Lab AMS lite:
Bambu Lab AMS lite Disclaimer and Safety Guidelines
Bambu Lab AMS lite Quick Start Guide
Check that you have all the included parts. Please review the entire Quick
Start Guide before operating the AMS lite.
Read the Disclaimer and Warning above to understand your legal rights and
responsibilities. If you have any questions or problems during the
installation, maintenance, or use of this product, please contact a Barn bu
Lab authorized dealer.
Safety Guidelines
- The product shall be used by personnel with necessary training, knowledge and experience.
- The product must be disconnected from the power supply before carrying out any installation or maintenance work.
- Installation and maintenance must be carried out by a skilled worker in compliance with the manufacturer’s instructions and local safety regulations.
- Do not use multiple plug adapters or extension leads.
- Do not touch the product with any wet part of the body and do not operate it while barefoot.
- Do not reach inside the appliance while it is in operation.
- The product is not allowed to be used by children. Please place the product out of the reach of children.
- This product is designed solely for indoor use. It should be kept in a dry environment
- The recommended operating temperature for the appliance is between 10°C to 30°C{50°F-86°F).
- The recommended humidity level is under 85%.
- The product should be positioned on a clean, stable and flat workbench.
- The product should be kept in a well-ventilated location.
Compliance Information
FCC Compliance Notice
Supplier’s Declaration of Conformity
Product name: AMS lite
Model Number: SA005
Responsibility Party: Shenzhen Tuozhu Technology Co.,Ltd. {Bambulab USA Inc)
Responsibility Party Address: 8000 Centre Park Drive, STE 330, Austin, TX,
78754
Website: www.bambulab.com
We, Shenzhen Tuozhu Technology Co.,Ltd. (Bambulab USA Inc) , being the responsible party, declares that the above mentioned model was tested to demonstrate compliance with all applicable FCC rules and regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation. Warning: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
ISED Compliance Notice
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
EU Compliance Statement
Hereby, Shenzhen Tuozhu Technology Co., Ltd. declares that the radio equipment type Bambu Lab AMS is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.bambulab.com/euro-compliance
UK Compliance Statement
Hereby, Shenzhen Tuozhu Technology Co., Ltd. declares that the radio equipment type Bambu Lab AMS lite is in compliance with Radio Equipment Regulations 2017. The full text of the GB declaration of conformity is available at the following internet address: www.bambulab.com/euro- compliance
Customer Support
www.bambulab.com
Copyright© 2023 Bambu Lab All Rights Reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>