PINEWORLD K6 Biometric Gun Safe User Manual

: June 1, 2024
: PINEWORLD

Table of Contents

PINEWORLD K6 Biometric Gun Safe
What’s In The Box
1. Notices
2. Components and Specifications
Specification
3. Getting Started
4. FAQ
FCC Statement:
Specifications
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PINEWORLD K6 Biometric Gun Safe

USER MANUAL

Please read carefully when getting started.
Jiangxi Fingerchip Intelligent Technology Co.,Ltd. reserves the final right to interpret this manual

What’s In The Box

Initial Passcode: 123456
Add Administrator/User:Long press √ key
Mute Mode: Long Press 2
Modify Passcode: Long press 5

1. Notices

| Any fingerprint can open the safe before setting the administrator. Please set the administrator when first use.
---|---
| The safe should be powered by 4 NEW & SAME AA batteries(LR6) from same brand.
| The original passcode is so simple that not safe. Please set your passcode.
| About emergency charging
①Charging cable only supports to be used in emergencies. Do not keep long-term charging, otherwise it will affect the service life of the safe.
②The safe is not equipped with a charging cable.
(Do not support TYPE-C to TYPE-C cables. Please use a USBA to TYPE-C cable.)
③Please replace batteries in time when the battery is low.
| Keep your fingers clean when unlock via fingerprint.
| The acceptable operating temperature for the product ranges from -25℃ to 55℃.
| Do not clean the safe with corrosive substances, so as not to damage the protective layer of the safe
| Do not place the batteries near fire to avoid explosion. Do not connect the two poles of the battery with metal objects tocause the battery to short circuit.

2. Components and Specifications

Core Functions:

◆ Quick Access: fingerprint unlock within 0.5s
◆ 3 Ways to Unlock: passcode, fingerprint, key
◆ Virtual passcode: can add random number before or after the real passcode (less than 20 digits)
◆ Alarms and warning: self-lock alarm, prying-resistant alarm, low battery warning

Core Functions

Specification

Color	Black
Size	342.4276.491.6mm
Weight	13.4lbs
Unlocking ways	Fingerprint, Passcode, key
Fingerprint resolution	500PPI
Capacity	Fingerprint: 50, Passcode: 50
Type-C Input Power	5V-2A(Max)

3. Getting Started

A. Install the battery

① Please unlock the safe with the key and then remove the Battery Cover.
②　Put in 4 NEW & SAME AA batteries (LR6).
③　Please put the Battery Cover back.

Install the battery

B. Set the administrator

Long press the key √ and set the administrator according to the voice prompt. (The first 2 passwords are for administrators, and the first one must be in the form of passcode, and the second one can be fingerprint or passcode. )

Note:

① Passcodes setting: Please set a 6-8 digit passcode. The passcode should not be set too simple. (e.g. 123456)
② Fingerprints setting: you are required to press the same finger 6 times from different angles, so as to quick access regardless of how you touch the scanner.

C. Other operations

Shortcut keys:

① Check the version: long press key 1
② Mute mode: long press key 2 to change mute/unmute mode
③ Add users: long press key √ then follow the voice prompt
④ Modify the passcode: long press key 5
⑤ Delete users: long press key √ , and long press key √ again after verifying the administrator. Then, press key 1 to delete all users’ fingerprints, or press key 2 to delete all users’ passcodes, or press 3 to delete all users. (Not include the administrator)
⑥ Virtual passcode: you can add random number before or after the real passcode to protect your passcode. The whole passcode should less than 20 digits.
⑦　Reset the safe: long press Setting Button for 3 seconds ( need to verify the administrator)
⑧ Verify the administrator: input the administrative passcode or fingerprint.
⑨ Open the safe by passcode: input a registered passcode then press key √ to confirm.

Multiple alarms and others:

① Prying-resistant alarm: when the safe is unlocked with the key or damaged by external force, a 60-second alarm will be triggered. You should press the anti-pry bar 3 times, or input a registered passcode or fingerprint to clear the alarm. If you haven’t set a passcode/fingerprint, remove the battery.
② Self-lock alarm: If you enter a wrong passcode 5 times in a row, the safe will be locked and a 60-second alarm will be triggered. You should input a registered fingerprint after beeping to clear the alarm.
③ Low battery warning: when the battery is low, the safe will remind you by voice. Please replace the batteries in time.

4. FAQ

① What should be noticed when getting started?

a. Any fingerprint can open the safe before setting the administrator.
b. Please set the administrator first when you get the safe.
② Can it always be charged with type-c cable?

No, charging cable only supports to be used in emergencies. Long-term charging will affect the service life of the safe. (That’s the reason why we don’t come with a charging cable)

③ Why I failed to set a fingerprint/ passcode?

Fingerprint setting: a. please keep the same finger every time you set a new fingerprint; b. it’s recommended to press the same finger at multiple angles and edges.
Passcode setting: do not set a simple passcode. (Example: 123456).

④ What should be noted when unlock via fingerprint and passcode?

Unlock via fingerprint: a. please keep your finger dry and clean; b. please ensure the fingerprint is registered.
Unlock via passcode: please ensure the passcode is correct.

⑤ The battery is dead, how to open the safe?

Method a: charge the safe with a type-c cable, and then unlock via registered passcode or fingerprint.
Method b: Unlock via key. (Note: The product is not equipped with the type-c cable.)

⑥ Any precautions about the battery?

a. please replace the batteries in time when it voice prompts“ low battery”.
b. please use 4 NEW & SAME batteries (Note: the service life will be affected if used and new batteries are mixed to use).

⑦ The safe keeps beeping/ system being locked, how to clear it?

Iplease refer to page 5.

⑧ The lid of the safe can’t be locked?

Please check whether the lid is stuck. If it doesn’t work, please email us for further help: support@fingercrystal.com.

⑨Any other undescribed problems?

Please feel free to contact us for help: support@fingercrystal.com.

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm from your body.