dellonda DG206 Outdoor Dining Table Weather Resistant Glass Table Instructions

: June 1, 2024
: dellonda

Table of Contents

Thank you
Important Information
Specification
About the Product
Safety Instructions
Assembly
Maintenance
Cleaning
Storage
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

dellonda DG206 Outdoor Dining Table Weather Resistant Glass Table

dellonda DG206 Outdoor Dining Table Weather Resistant Glass Table
In

Thank you

Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will,
if used according to these instructions, and properly maintained, give you years of trouble free performance

Important Information

Please read these instructions carefully. Note the safe operational requirements, warnings & cautions. Use the product correctly and with care for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these instructions safe for future use.

Refer to instruction manual

Wear gloves during assembly

Specification

Model No.: DG209
Dimensions (W x H x D) 1500 x 760 x 900mm
Supplied with fixings (48 M5 x 40mm screws and 4 foot pads)

About the Product

Outdoor/Indoor dining table. Features tempered glass table top. Stylish modern anthracite finish. A perfect match for Dellonda Model No. DG203 (Set of 6 Dining Chairs). Some simple assembly is required.

Safety Instructions

WARNING! The warnings, cautions and instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into these products, but must be applied by the users.
Ensure the items are assembled properly and securely.
To avoid tipping, use on firm, level ground.
DO NOT expose furniture to high temperature heat sources i.e. barbecue.
DO NOT stand on furniture.

Assembly

CAUTION It is inherent that edges and corners can cause cuts if improperly handled during assembly. BE CAREFUL, wear correct work gloves.
Lay the table face down on a clean and dry surface.
Locate a leg in the corner of the table.
Using 12 screws (M5 x 40mm) fix the leg to the holes in the table (fig.1).
DO NOT over tighten screws to avoid damage to the table material.
Fit the foot pads into the bottom of the legs.
Stand the table upright and carefully and gently place the glass table into the frame

Maintenance

Regularly check all fixings are secure.
Perform maintenance at least once a year in order to extend the life of your furniture.

Cleaning

Regularly wipe down the unit with hot soapy water.
Any modifications of these items may be dangerous and are not permitted. DO NOT alter parts supplied by the manufacturer.

Storage

We recommend you use covers to protect these items when not in use. Covers must be removed periodically to minimise moisture build up.

Environment Protection and Waste Protection

Recycle unwanted packaging materials. When this product is no longer required, or has reached the end of it’s useful life, please dispose of it in an environmentally friendly way. It is our policy to continually improve products and we reserve the right to alter data, specifications and parts without prior notice. No liability is accepted for incorrect use of this product. Guarantee is 12 months from purchase date, proof of which is required for any claim.