plexgear 61856 Air mouse presenter User Manual

: June 3, 2024
: plexgear

Table of Contents

plexgear 61856 Air mouse presenter
Product View
Presenter Function
How to Use Timer
Product Parameters
Safety Tips
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

plexgear 61856 Air mouse presenter

Product View

plexgear-61856-Air-mouse-present-FIG1

Presenter Function

keys	Operation Descriptions
Laser Pointer ：Keep pressing to emit laser;

release the button, the laser disappears.

| Single click to switch on/off Air Mouse. When LED screen displays “ ”, it is Air mouse Mode.
Long press： Pen function.

Keep pressing this button and move your

hand to make marks; Release your hand to exit.( for PowerPoint full slideshow only)

| Double click to erase the marks

( for PowerPoint full slideshow only)

---|---
| Single click to Page Up
Long Press to Play/Esc ( for PowerPoint only)
| Single click to Page Down
Long press to Blank Screen

( for PowerPoint/Keynote full slideshow only)

Note: In Mac system Keynote software, only support Page Up, Page Down, Blank Screen, volume control and air mouse functions.

How to Use Timer

Enter Timer settings interface: Press[L ] and[R ]at the same time for 2 seconds, LED screen displays[ ] then to set.
Note: If no operation for 15 seconds, it auto quit during timer settings.
Set timer : Single click[ ] minutes -1, keep pressing to continue-; Single click [ ] minutes +1, keep pressing to continue+.
Start timer: Single click[ R] to save settings and start the timer, and then LED displays the countdown. If single click[L ], quit settings.
Vibration reminder: vibration reminder should be carried out at the half time, with 5 minutes and 0 minutes remaining.
Quit: Though start timer but users want to cancel, first press[L ] and[R ] at the same time for 2 seconds to the timer settings interface again, then press[L ] to quit.

Operating Hints

Pull the Mini USB receiver out of the presenter, plug in USB Port that is available on the computer, and power it on then it works.
Upon the first installation on Mac, Keyboard Set Assistant may appear and prompt that the keyboard cannot be identified. Just click “Continue” to finish the installation, and then the presenter will work accordingly.
The receiving distance of the Mini USB receiver will be decreased by disturb of electronic devices around.
In the PowerPoint full slideshow, when first use pen, there is only red dot but no marks, please try again.
If mouse cursor drift occurs, please recalibrate: Keep the product on the table horizontally, and then keep pressing[ ] and[R ] till[ ] and[ ] light on, which mean calibration is successful.
The product has 3 mouse speeds:
- Fast speed： Keep pressing [ ] and[ ] till [ ] and[ ] light on;
- Normal speed： Keep pressing[ ] and[ ] till [ ] and[ ] light on;
- Slow speed： Keep pressing[ ] and[ ] till[ ] and[ ] light on.

Charging
The product is a built-in lithium battery and can be charged by USB. The suggested charging time is 3~4 hours. When charging, the battery icon blinks; when full charged, it stops blinking and goes off.
Note: Press the button, the battery icon[ ]blinks, which means low battery, please charge in time.

Product Parameters

Transmitter

RF Frequency:| RF 2.4GHz
Control Distance:| 30M
Laser Distance:| >200M
Laser Power:| <5mW or <1mW
Battery:| Lithium Battery
Battery Capacity:| 400mAh
---|---
Sleep Current:| 50uA
Dimension:| 128.131.413.8mm
Weight:| 45g ((including receiver)
Frequency Range:| 2405 – 2475 MHz
Effective Radiated Power:| 2.324 dBm
Receiver
Operation System:| Windows, Mac
USB Interface:| USB2.0,Compatible with USB1.0,USB3.0
Working Voltage:| 4.5-5.5V
Frequency Range:| 2405 – 2475 MHz
Effective Radiated Power:| 2.324 dBm

Safety Tips

. To avoid possible eye damage, never point the device at people, especially their faces, or look directly into the device’s laser beam.
Avoid pointing the device’s laser beam at a mirror or other highly reflective surface.
Keep the device away from children playing.
Never view the device’s laser beam using telescopic devices, such as a microscope or binoculars.
Any attempt to disassemble, adjust or repair the device may result in exposure to laser light or other safety hazards.

For EN
Simplified EU Declaration of Conformity Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/ EU. Full text of the EU declaration of conformity is available at www.kjell.com/61856

www.plexgear.com
Box 50435 Malmö
Sweden
2021-05-13