BougeRV ISE137 Arch 200 Watts Fiberglass Flexible Solar Panel User Manual
- May 15, 2024
- BougeRV
Table of Contents
- Safety Instructions
- Solar Panel Dimension
- How To Use
- Electrical Parameters
- Frequently Asked Questions
- What causes the low output power or no output during the use of solar
- Why the solar panel can't provide 100% of the output energy？
- What should I do if the solar panel I received is damaged, missing parts,
- What kind of device can be charged by this solar panel？
- What do I need to install this solar panel?
- Limited Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**BougeRV ISE137 Arch 200 Watts Fiberglass Flexible Solar Panel User Manual
**
Safety Instructions
Please follow the safety instructions for operation, the damage caused by not following the safety instructions shall be borne by the individual.
Please save these instructions
If you need to use the PDF version of the manual, you can contact us: service@bougerv.com
Solar Panel Dimension
100W Fiberglass Flexible Mono Solar Panel
200W Fiberglass Flexible Mono Solar Panel
How To Use
Installation Guide
STEP 1
Spread water on the front and back of the solar panel, and wipe with a damp
cloth, the installation position on the roof also needs to be cleaned in the
same way.
STEP 2
It is recommended to use adhesive to apply a strip of at least 0.25
inches/0.6 centimeters wide every 6.5 inches/ 17 centimeters on the back of
the solar panel to ensure stability and leave some space for airflow.
STEP 3
Place the solar panel in the desired position on the roof and press it
firmly with foam to ensure that the adhesive is completely adhered to the roof
surface.
STEP 4
Apply adhesive to the windward edge of the panel for extra protection.
STEP 5
Let it sit for 48 hours to ensure that the adhesive is fully in contact
with the roof.
Solar Off-grid System
- First connect battery terminal wires to the charge controller.
- Then connect the solar panel to the charge controller.
Solar Power Station System
Compatible with various types power stations
As long as your cable is equipped with a MC4 connector, you can connect to our solar panels.
Note: Connecting the power station does not need connecting with the solar charge controller.
Series Connection
The panel can be wired in series to produce the desired voltage output.
Parallel Connection
The solar panel can be wired in parallel to produce the desired current output
with the solar parallel connector.
Electrical Parameters
100W/200W Fiberglass Flexible Mono Solar Panel
| Model | 100W | 200W |
|---|---|---|
| Maximum Power (Pmax) | 100W ±5% | 200W ±5% |
| Solar cells Efficiency | 23% | 23% |
| Max. Power Voltage (Vmp) | 17.1V ±5% | 17.1V ±5% |
| Max. Power Current (Imp) | 5.85A ±5% | 11.7A ±5% |
| Open Circuit Voltage(Voc) | 19.8V ±5% | 20.1V ±5% |
| Short Circuit Current(Isc) | 6.16A ±5% | 12.28A ±5% |
| Max. System Voltage | 1000V DC | 1000V DC |
| Operating Temperature Limits | -40°F – +185°F -40°C-+85°C | -40°F – |
+185°F -40°C-+85°C
Temperature Coefficient of Pmax| -0.39%/°C| -0.39%/°C
Temperature Coefficient of Voc| -0.33%/°C| -0.33%/°C
Temperature Coefficient of Isc| 0.06°Ail°C| 0.06%/°C
Dimensions| 39.623.70.08 inches 10056022.1mm| 58.1310.08 inches
14767872.1mm
Weight| 3.81 lbs 1.73 kg| 7.05 lbs 3.2 kg
BougeRV provides you with professional technical services.
You can send your needs and the parameter information or instructions of your
purchased accessories directly to our email:
service@bougerv.com,
we will help you build the ideal DIY solar system.
Frequently Asked Questions
What causes the low output power or no output during the use of solar
panels? How can I solve it?
Why the solar panel can't provide 100% of the output energy？
1. Limited by light intensity. Please refer to Q1 for more details. 2. Limited by the solar charge controller. The output conversion efficiency of the PWM controller is 75%, and the output conversion efficiency of the MPPT controller is above 90%. 3. Limited by the power station. The PV input voltage and PV input current of the power station will limit the output of the solar panel. It'd be better to confirm the input parameters of the power station before building a solar panel system.
What should I do if the solar panel I received is damaged, missing parts,
or has no output?
Please send relevant pictures to our after-sales mailbox service@bougerv.com immediately, and leave your order number. We will reply one by one according to the chronological order sent by the customers.
What kind of device can be charged by this solar panel？
1. Solar Power Station 2. Lead-acid Battery（need the solar charge controller） 3. Lithium Battery（need the solar charge controller） BougeRV sells different kinds of MPPT/PWM controllers, lithium iron phosphate battery and power stations to build your solar system.
What do I need to install this solar panel?
It can be attached to your yacht or RV using silicone adhesive or mounting tape
Limited Warranty
Fiberglass Flexible Mono Solar Panel comes with an 5-year limited warranty
that commences from the date of purchase.We offer the following two types of
limited warranty for all BougeRV Mono Solar Panels:
1. 5 years Material & workmanship warranty
2. 25 years Linear power output warranty
- 5 year 95% output warranty
- 10 year 90% output warranty
- 25 year 80% output warranty
lf you have any questions during use, please feel free to contact BougeRV
Tech Support:
service@bougerv.com (US)
1-408-656-8402
www.bougerv.com
1-669-232-7427
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>