PIONEER-32 Wireless Headphones User Manual

PIONEER-32 Wireless Headphones

Specifications

• Model: PIONEER-32
• Battery Life: 70 Hours (ANC OFF), 45 Hours (ANC ON)
• Bluetooth: PIONEER-32

Product Usage Instructions

How to Pair
To pair the headphones with a device, follow these steps:

1. Turn on the headphones.
2. Activate Bluetooth on your device.
3. Search for available devices and select “PIONEER-32”.
4. If prompted, enter the necessary code to pair the devices.

ANC Button Instructions
To control the Active Noise Cancellation (ANC) feature

• Press the ANC button to toggle between ANC ON and OFF.
• Adjust the ANC settings as needed for optimal noise cancellation.

Volume Control/Music Control
Use the buttons on the headphones to adjust volume, play/pause music, answer/hang up calls, reject calls, redial, and control music playback.

Clear Paired Device
To clear paired devices from the headphones

1. Press and hold the designated button for clearing paired devices.
2. Follow the on-screen instructions to complete the process.

Charge the Headphones
To charge the headphones:

1. Connect the provided charging cable to the headphones.
2. Connect the other end of the cable to a power source.
3. Ensure proper charging indication and allow sufficient time for a full charge.

FAQ

• Q: How long does the battery last on a full charge?
  A: The battery lasts for 70 hours with ANC OFF and 45 hours with ANC ON.

• Q: How do I pair the headphones with my device?
  A: Turn on the headphones, activate Bluetooth on your device, search for available devices, and select “PIONEER-32”. Enter the pairing code if required.

• Q: How do I adjust the ANC settings?
  A: Press the ANC button to toggle between ANC ON and OFF, and adjust the settings for optimal noise cancellation.

Wireless Headphones
Model : PIONEER-32

Diagram

1. Volume Up/Next Track
2. Multi-Function Button
3. Volume Down/ Previous Track
4. ANC /Transparency button
5. Microphone 3.5mm
6. Audio Interface
7. ANC Switch Indicator
8. Type-C Charging Interface
9. Power on LED indicator

Package List

• Wireless Headphones X1
• 3.5mmAudio Cable X1
• User Manual X1
• Charging Cable X1

Specification

How to Pair

Step 1

Step 2

When the headset is power off, press and hold the Multi-function Button until the indicator flashes blue and red alternately to enter the pairing mode. Turn on the Bluetooth of the mobile phone and find “PIONEER-32” to connect.

Play/Pause/Answer/Hang up/Reject/Redial

ANC Button Instructions

1. Both ANC mode & Transparency mode can only be activated when the headphone is powered on.
2. When headphone is powered on, the ANC function(noise canceling) is started by default, click ANC button to switch to the Transparency mode( Amplify the sound of the external environment), Click again to turn off the ANC and ANC indicator turns off

Volume Control/Music Control

Clear Paired Device

Charge the Headphones

Q: Couldn’t connect?
A: Press and hold the “circle button” for 10 seconds while the headphones are turned off, then search bluetooth devices to connect the headphones.

Q: How to connect to 2 devices simultaneously?
A:

1. Pair with your first device
2. Turn off the bluetooth of the first device, pair with the second device
3. Turn on the bluetooth of the first device to connect again
4. Now your headset is connected to the 2 devices at the same time.

Q: What type of device is compatible?
A: This headsets are compatible with all devices that support Bluetooth or 3.5 mm plug cables. A wireless Transmitter (NOT Included) needs to be prepared when connected with a non-Wireless enabled TV/PC.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statemen t: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

NOTICE: Note: This equipment has been tested and found to comply with these limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

ISEDC RSS Warning
This device complies with Innovation, Science and Economic Development Canada Compliance licence-exempt RSS standard (s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statemen t: This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This product complies with the radio interference requirements of the European Community.
This symbol means the product must not be discarded as ‘household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>