MONSTER Airmars XKT30 True Wireless Bluetooth Headphone Instruction Manual

MONSTER Airmars XKT30 True Wireless Bluetooth Headphone

Product parameters

• Bluetooth version – ———————–  V5.4
• Transmission distance – ———————–  >10m
• Driver diameter – ———————–ф13.6mm
• Driver impedance- ———————–  20Ω
• Sensitivity- ————————– 120 ±3dB
• Frequency response- ————————–  20Hz-20kHz
• Battery capacity (charging case)– ————————– 300mAh 3.7V
• Battery capacity (headphone)- ————————–30mAh 3.7V
• Charging time (headphone)- ————————— ≈ 1.5 hours
• Music playtime (headphone)- ————————– –≈4hours
• Music playtime with charging case————————– — ≈16 hours

Packing list

Product Schematic Description

Charge the charging case

Connect the charging case to the 5V power adapter with Type-C charging cable.

Rated input :5V= 30mA(Headphone)
Rated input: 5V= 300mA(charging case)
Tips: Close the charging box. When the ice blue light flashes, please charge the charging box in time.

Indicator guide

Product operating instructions

1. Power on
   Method 1: Open the cover of the charging box, the headphones will turn on automatically.
   Method 2: Long press MFB for 3 seconds.

2. Power off
   Method 1: Put the earphone back in the charging case close the cover and turn off he earphone.
   Method 2 : After disconnected from the bluetooth device for 3 minutes.

3. Pairing
   Method 1: Open the cover of the charging box, the headphones will start pairing automatically.
   Method 2: Search and click for “Monster Airmars XT30 ” on the bluetooth list of the smart device, and when connection is successful, “Connected” will be heard.

If the distance is exceeded, return to the effective distance within 3 minutes after disconnection, and automatically connect the device.

Note:

• If the product is not suitable for a long time, it should be fully charged and ensure that the device is in a shutdown state.
• After charging, please pull out the charging cable to avoid equipment damage caused by long-time charging.

Earphone wearing guide

First step Open the cover of the charging case Remove the headphones from the charging case

The second step Use the icon. Thumb Hold both sides of the headphones stick with your index finger. Use your middle finger to push the front and back headphones The cover  section remains in this state

The third step Take the right ear as an example: the two head- phone covers clamp the two sides of the ear respectively, as shown in the figure, adjust to the middle and lower position of the ear, so that the speaker sound hole is aligned with the ear canal; The same goes for the left ear.

Step four Keep your headphones in your left and right ears  Enjoy the music now.

Touch key operation

Restore factory settings
If the headset is not paired with the Bluetooth device after the headset is turned on, the left/right headset is paired successfully. After clicking the left/right headset for 5 times, the left/right ear is turned off (all information about pairing and connection is cleared).

Precautions

1. Open the charging box cover, and the headphones will automatically turn on, connect, or pair; Close the charging box cover and automatically turn off the headphones for charging.
2. Charging every 15 days will extend battery life when not in use often. Cleaning off dirt on the charging contacts by cotton swabs with alcohol will maintain a good contact for charging.
3. Keep battery (battery pack) away from inflammables or excessive heat such as direct sunlight.
4. Due to the wireless connection mode of this product, in the daily use process, influenced by the environment, mobile phone brand, usage behavior and other factors, it is normal that there may be a brief and slight sound delay in the process of playing music.

Warnings

1. Do not use headphones at high volume for an extended period of time.
2. Keep the headphones away from dust and water.
3. Do not disassemble the headphones and accessories, otherwise warranty will be voided
4. Keep headphones away from any impact or vibration.
5. Do not use any chemical solvents or cleaning agent on the headphones.

This table is compiled according to SJ/T 11364.
0: Indicates that this hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in GB/T 26572.
X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2A8PV-QSMXKT30
Environment Friendly Use Period (EFUP)
The period of use of this symbol (10 years) is the period during which harmful substances in electronic and electrical products will not leak or mutate under normal use conditions, and users of electronic products will not cause serious pollution to the environment or serious damage to their personal and property when using this electronic product.

Warranty service

Dear user, this warranty card is the proof of your future warranty application with the seller to fill it out and keep it for future use!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>