ergotron Neo Flex Dual Display Wall Mount User Guide
- October 27, 2023
- ERGOTRON
Table of Contents
- Components
- Tools Needed
- Determine Ergonomic Mounting Height
- Wall Mounting Options
- Attach to Wall
- Attach Pivots to Brackets
- Attach Displays
- Attach Displays to Wall Bracket
- Range of Motion
- Attach Pivot Covers
- Attach Cable Management
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
User’s Guide
Neo-Flex Dual Display
Wall Mount
Components
Tools Needed
See Wall Mounting Options for additional tools needed for your type of wall installation.
Determine Ergonomic Mounting Height
Learn more about ergonomic computer use at: www.ergotron.com/ergonomics
Wall Mounting Options
WARNING:
Ensure that the wall structure is capable of supporting four times the total
weight of mounted equipment. Mounting to wall surfaces that do not meet this
criteria may result in an unstable, unsafe condition which could lead to
personal injury and/or property damage. Consult a construction professional if
you have any doubt about what this means in regard to your particular
application.
Attach to Wall
NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution over time. Inspect mounting solution for loose fasteners on a routine basis. If desired, apply a light duty thread locking adhesive to fasteners before installation to prevent back-out.
NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution over time. Inspect mounting solution for loose fasteners on a routine basis. If desired, apply a light duty thread locking adhesive to fasteners before installation to prevent back-out.
WARNING:
Mounting holes must be at least 3-1/8” (80mm) deep and must be located within
solid concrete, not mortar or covering material. If you drill into an
area of concrete that is not solid, reposition mounting holes until both
anchors can be fully inserted into solid concrete!
WARNING:
Anchors that are not fully set in solid concrete will not support the applied
load resulting in an unstable, unsafe condition which could lead to personal
injury and/or property damage. Consult a construction professional if you have
any doubt about what this means in regard to your particular situation.
NOTE: Fasteners may unwind due to vibration caused by movement of mounting solution over time. Inspect mounting solution for loose fasteners on a routine basis. If desired, apply a light duty thread locking adhesive to fasteners before installation to prevent back-out.
Attach Pivots to Brackets
Attach Displays
Attach Displays to Wall Bracket
Range of Motion
This product is designed to adjust quickly and easily according to your needs – refer to following steps for adjustment.
Adjust Tilt – Forward and Backward
If it does not stay in place or movement is stiff , tension needs adjustment.
Adjust until motion is equal.
Adjust Rotate – Portrait/Landscape
If it does not stay in place or movement is stiff , tension needs adjustment.
Adjust until motion is equal.
Attach Pivot Covers
Attach Cable Management
For Warranty visit:
www.ergotron.com/warranty
For Service visit: www.ergotron.com
For local customer care phone numbers visit: http://contact.ergotron.com
NOTE: When contacting customer service, reference the serial number.
www.ergotron.com | USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: japansupport@ergotron.com
© 2015 Ergotron, Inc. All rights reserved.
While Ergotron, Inc. makes every effort to provide accurate and complete
information on the installation and use of its products, it will not be held
liable for any editorial errors or omissions (including those made in the
process of translation from English to another language), or for incidental,
special or consequential damages of any nature resulting from furnishing this
instruction and performance of equipment in connection with this instruction.
Ergotron, Inc. reserves the right to make changes in the product design and/or
product documentation without notification to its users. For the most current
product information, or to know if this document is available in languages
other than those herein, please contact Ergotron. No part of this publication
may be reproduced, stored in a retrieval system, or transmitted in any form or
by any means, electronic, mechanical, photocopying, recording or otherwise
without the prior written consent of Ergotron, Inc.,1181 Trapp Road, Eagan,
Minnesota, 55121, USA
Patents Pending and Patented U.S. & Foreign. Ergotron is a registered
trademark of Ergotron, Inc.
888-61-113-G-00 rev. C + 06/21