JONES STEPHENS T25250 Ice Maker Box Instructions

JONES STEPHENS T25250 Ice Maker Box

Product Information

Specifications:

• Product: Ice Maker Box
• Tools Needed: Tape measure, hammer, plumber adhesive, wood screws, screw gun, plumbing connectors
• Replacement Part Number: B05928
• Supply Line Options:
  • A. Stainless steel braided supply line:
  • Part numbers available: S04230 (12), S04231(60), S04232 (84)
  • B. Polyethylene tubing with insert:
  • Part numbers available: Tubing T25250, Sleeve C74005, Insert C74100LF, Nut C74014
  • C. Vinyl tubing with insert:
  • Part numbers available: Tubing T26125, Insert C74100LF, Sleeve C74096, Nut C74014

Product Usage Instructions

1. Determine the finished height for your ice maker box. Use a tape measure to mark the stud where the box will be installed.
2. Remove the decorative cover and store it in a safe place. If damaged or lost, use replacement part number B05928.
3. Mount ice maker box to the wall with either the nail braces on the left or the tab on the right. For maximum stability, use both connections by framing in a bay.
4. Check the stability of the box by applying a small amount of force. Adjust as needed.
5. Make the supply connection by appropriate means (i.e., PEX crimp, Sweat, etc.). Allow the connection to set for the appropriate time.
6. Confirm that the valve is closed. Turn on the water supply to the ice maker box. Check for leaks and address as needed.
7. Turn off the water supply.
8. Re-install the decorative cover plate.
9. Install the desired supply line between the ice maker supply valve and the refrigerator.
10. For Stainless steel braided supply line:

  * Choose from part numbers: S04230 (12), S04231(60), S04232 (84)
2. For Polyethylene tubing with insert:
  * Use part numbers: Tubing T25250, Sleeve C74005, Insert C74100LF, Nut C74014
3. For Vinyl tubing with insert:
  * Use part numbers: Tubing T26125, Insert C74100LF, Sleeve C74096, Nut C74014

10. Turn the water supply back on. Check for leaks and address as needed.
11. Cycle the ice maker several times prior to consuming the ice/water.

Frequently Asked Questions

• Q: Can I use a different type of supply line than the options provided?
  • A: It is recommended to use one of the specified supply line options for optimal performance and compatibility with the ice maker box.
• Q: How do I properly adjust the stability of the ice maker box?
  • A: Apply gentle force to the box and make necessary adjustments to ensure it is securely mounted to the wall.

TOOLS NEEDED

Tape measure, hammer, plumbers adhesive, wood screws, screw gun, and plumbing connectors.

CAUTION

For sweat connections, do not apply excessive heat to the supply connection as it may damage the shutoff valve.

NOTE

Check local plumbing codes for any restrictions that may exist in your area.

1. Determine the finished height for your ice maker box. Use a tape measure to mark the stud where the box will be installed.

2. Remove the decorative cover and store it in a safe place. If damaged or lost, the replacement part number is B05928.

3. Mount ice maker box to the wall with either the nail braces on the left or the tab on the right.
   For maximum stability, use both connections by framing in a bay.

4. Once the box has been installed, check the stability by applying a small amount of force to the box. Adjust as needed.

5. Make the supply connection by appropriate means (i.e. PEX crimp, Sweat etc). Allow the connection to be set for the appropriate time.

6. Confirm that the valve is closed. Turn on the water supply to the ice maker box. Check for leaks and address as needed.

7. Turn off the water supply.

8. Re-install the decorative cover plate.

9. Install the desired supply line between the ice maker supply valve and the refrigerator. The choices are:

   • A. Stainless steel braided supply line.
     Part numbers available are S04230 (12”), S04231(60”), and S04232 (84”)

   • B. Polyethylene tubing with insert.
     Part numbers available are (tubing) T25250, (sleeve) C74005, (insert) C74100LF & (nut) C74014

   • C. Vinyl tubing with insert.
     Part numbers available are (tubing) T26125, (insert) C74100LF, (sleeve) C74096 & (nut) C74014

10. Turn the water supply back on. Check for leaks and address as needed.

11. Cycle the ice maker several times prior to consuming the ice/water.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>