YITAHOME PD220 2-in-1 Tumbler Heat Press Machine Instruction Manual

YITAHOME PD220 2-in-1 Tumbler Heat Press Machine

Start Here

Warnings must be followed carefully to avoid body injury.

Transfer Parameter(for reference)

Main parameters

Operation Introduction

Operation Steps

1. Set the temperature, such as ceramic mug 180 degrees, 180 seconds
2. After the temperature reaches 180 degrees, put the mug with the sublimation paper in the machine, press down the handle, and use moderate force.
3. The machine will count down automatically after the handle is pressed down, and the mug can be taken out after the countdown is completed.

Please perform all operations after the power is off.

Main spare parts

1. Handle: put pressure on
2. Adjusting lever
3. Guide rod
4. Display screen
5. Button
6. Power socket
7. Overload protector
8. Power switch
9. Aviation connector
10. Heating pad

Adjusting rod: adjust the pressure of the heater according to the mug specifications.
Guide rod: to ensure that the pressure at both ends of the mug heater is balanced.

Common problem
E1/E2: E1/E2 appearing on the display means that there is a short circuit/open circuit in the temperature probe wire (that is, the wire is broken and connected to cause a short circuit, and the open circuit means that the wire is broken or the plug wire falls off). Check the aviation connector of the mug heater.

1. Before working, you need to prepare the correct materials: sublimation mugs, sublimation paper, etc.
2. The pattern turns yellow/brown: reduce the temperature or reduce the time.
3. The color of the pattern is light/white: it is necessary to increase the temperature or add time.
4. The mug heater bubbles: need to be replaced with new ones.
5. Temperature does not rise: Check whether the heater wiring and the controller are plugged in tightly.

Guarantee

The products are strictly based on the Consumer Protection Law of the People’s Republic of China and the Product Quality Law of the People’s Republic of China. The services are as follows:

• Within 12 months, this product has the performance failure listed in the “Product Performance Failure Table”.
• It is confirmed by the manufacturer and can be used for maintenance service free of charge. If out of validity, damage caused by force majeure, or human causes, the machine is not covered by the warranty, repair in charge.

Safety instruction: Before operating this unit, please read these instructions completely and save them

Notice

• This machine adopts an eccentric bearing structure, it is strictly forbidden to adjust the pressure too much to avoid damage to the bearing Keep unplugged when moving the machine
• Keep unplugging when installing accessories Place on a flat and stable platform and operate under ventilated conditions
• Wear special protective equipment when operating the machine

Warning: Improper use may result in electric shock, fire, personal injury and other damage.

• Do not use this machine in a hazardous location
• Do not use it when the machine is not working properly.
• Do not allow children or adults who do not understand this manual to operate this machine.
• Do not disassemble and repair this machine.
• Do not use an unsuitable AC outlet.
• Do not touch the heating plate when the machine is heating.

Warranty

warranty content
Product Performance Failure Table

Mach i ne body| Parts of the machine itself (excluding main parts)| One year| Fault 1| The mach ne cannot be used normally according to the operating procedure
---|---|---|---|---

M ain parts

I

|

PCBA(circuit board)

| One year| Fault 3|

Display error

Mug heating element                                           I    90days|

Fault4

|

Failure heating

Circuit Board Wiring Method

Electrical schematic diagram

1. (HEAT)Heating plate input live wire
2. (N) The main incoming line zero line n
3. (COM)Heating plate input zero line
4. (L) Main incoming line L
5. (CON1 )Button switch line
6. (CON2)NTC temperature probe wire
7. (CON3)Motherboard and display cable

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>