HARBOR FREIGHT 70350 15 Inch End Cabinet Instruction Manual

HARBOR FREIGHT 70350 15 Inch End Cabinet

Product Information

Specifications:

• Total Weight Capacity: 720 lbs when attached Roll Cab is full (290 lbs when Cab is empty)
• Weight Capacity per Connected Unit:
  • Roll Cab Size 42: 180 lb
  • Roll Cab Size 56: 380 lb
  • Roll Cab Size 72: 720 lb

Product Usage Instructions

Assembly Precautions:

1. Assemble only according to the provided instructions. Mount only on the side of the Bottom Cabinet as directed. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean, well-lit, and free from obstructions.
4. Ensure bystanders are kept out of the assembly area.

Use Precautions:

1. Do not assemble when tired or under the influence of alcohol, drugs, or medication.
2. Ensure weight capacity and product capabilities apply to a properly assembled product only.
3. Assemble on a flat, level, hard, and smooth surface capable of supporting the loaded Cabinet safely.

To Prevent Serious Injury and Death from Tipping:

1. DO NOT sit, stand, or climb on this item.
2. This product is not a toy; do not allow children to play with or near it.
3. Do not exceed weight capacities and ensure even distribution of weight from bottom up.
4. Use the product as intended only.
5. Inspect before every use and do not use if parts are loose or damaged.
6. Maintain product labels and nameplates for important safety information.

Assembly and Mounting Instructions:
Read the entire IMPORTANT SAFETY INFORMATION section at the beginning of the document before setting up or using this product.

Mounting:

1. Remove the handle from the side of the Bottom Cabinet.
2. With an assistant, place the EMPTY End Cabinet onto either side of the Bottom Cabinet, ensuring the lip on the End Cabinet fits securely over the top edge of the Bottom Cabinet.
3. Secure the End Cabinet to the Bottom Cabinet from underneath using Mounting Bolts.

Frequently Asked Questions (FAQ)

Q: What should I do if any parts are missing or broken during unpacking?
A: In case of missing or broken parts, please call 1-888-866-5797 as soon as possible for assistance.

Q: How can I contact technical support for this product?
A: You can email our technical support at productsupport@harborfreight.com or call 1-888-866-5797 for any technical questions.

Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright© 2023 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

WARNING

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

Specifications

Total Weight Capacity| 720 lbs when attached Roll Cab is full (290 lbs when Cab is empty)
---|---
Weight Capacity per Connected Unit

Roll Cab Size| Locker| End Cabinet
42″| 180 lb| 290 lb
56″| 380 lb| 570 lb
72″| 720 lb| 720 lb

IMPORTANT SAFETY INFORMATION

Assembly Precautions

1. Assemble only according to these instructions. Mount only on side of Bottom Cabinet according to instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply to properly and completely assembled product only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting loaded Cabinet.

Use Precautions

TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:

1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.

2. This product is not a toy nor a toy chest.
   Do not allow children to play with or near this item.

3. Do not exceed weight capacities, evenly distributed from bottom up.
   Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.

4. Do not move or lift while loaded.

5. Use as intended only.

6. Inspect before every use; do not use if parts are loose or damaged.

7. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

Assembly and Mounting Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.

Mounting

1. Remove handle from side of Bottom Cabinet.
2. Using an assistant, place EMPTY End Cabinet onto either side of Bottom Cabinet, making sure lip on End Cabinet fits securely over top edge of Bottom Cabinet.
3. Secure End Cabinet to Bottom Cabinet from underneath, using Mounting Bolts.

Operation Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product.

Fill End Cabinet evenly, from bottom to top. Do not exceed weight capacities.

Maintenance and Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

WARNING
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:

Do not use damaged equipment. If any part becomes damaged, have the problem corrected before further use.

1. PERIODICALLY, inspect the general condition of the Cabinet. Check for:
   • loose hardware,
   • misalignment or binding of moving parts,
   • cracked or broken parts,
   • any other condition that may affect its safe operation.
2. Wipe external surfaces of the Cabinet with clean cloth.
3. Lubricate Drawer Slides as needed.

Parts List and Diagram

Parts List

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Parts may not be interchangeable.

Specify UPC number when ordering:

• Black: 193175496133
• Blue: 193175496140
• Gray: 193175496164
• Green: 193175496171
• Orange: 193175496188
• White: 193175496546
• Yellow: 193175496553
• Red: 193175445193

Assembly Diagram

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

26677 Agoura Road • Calabasas, CA 91302 • 1-888-866-5797

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>