PowerPac PPIC832 Ceramic Cooker Owner’s Manual
- June 1, 2024
- PowerPac
Table of Contents
PowerPac PPIC832 Ceramic Cooker
Product Information
Specifications
- Model: PPIC832
- Heating Method: Far-infrared
- Compatible Pots: Iron, Aluminium, Copper, Ceramics,
- Heat-resistant Glass
- Control: Touch Control with Timer Function
- Safety Features: Over-heat Protection, High/Low Voltage
- Protection, Constant-temperature Over-heat Protection
- Material: Crystal Glass Plate
Product Usage Instructions
1. Safety Precautions
Before using the ceramic cooker, please read the safety warnings and precautions in the manual.
2. Pot Selection
Ensure you use pots that are flat-based stainless steel with a diameter between 12 cm to 26 cm for optimal performance.
3. Powering On
Make sure the voltage and frequency of the power source match the appliance requirements. Plug the cooker directly into a grounded wall socket.
4. Cooking Functions
Use the touch controls to select the desired cooking function. The cooker offers various functions including warming.
5. Cleaning
After use, allow the cooker to cool down before cleaning. Use a soft cloth with mild detergent to clean the crystal glass plate.
FAQ
- Q: Can I use any type of pot on this ceramic cooker?
- A: Yes, you can use iron, aluminum, copper, ceramics, marmite heat-resistant glass, and any heat-resistant utensil on this cooker.
- Q: What safety features does this cooker have?
- A: The cooker has over-heat protection, inner-temperature over-heat protection, high/low voltage protection, and constant-temperature over-heat protection for safety.
- Q: What should I do if the cooker surface gets too hot?
- A: If the temperature exceeds 650°C, the cooker will automatically shut off to prevent overheating.
Parts & Description
Usable Pots/Pans
Material: Iron, cast iron, enameled iron, steel, stainless steel, glass, heat-
resistant glass, ceramic, copper, aluminum – pots & pans with a flat bottom
and a diameter from 12 cm to 26 cm.
DO NOT use pots & pans with a round bottom and a diameter less than 12 cm or
greater than 26 cm
FEATURES
The infrared cooker makes use of far-infrared light to heat food. It is especially suitable for modern family cooking. Its main characteristics are as follows:
- High-tech, far-infrared heating: it uses the far-infrared portion of the electromagnetic spectrum, which is entirely safe and poses no danger to health. It includes many cooking functions, including warming
- Any pot can be used, such as iron, aluminum, copper, ceramics, marmite heat-resistant glass and any heat-resistant utensil can be used as well
- Multi-function: Touch control, Timer function
- Environmentally friendly: no fire, no smoke, no soot and no carbon monoxide
- Easy to clean: crystal glass plate
- Convenient: intelligent micro-computer control
- Safety: numerous protections installed (see below)
SAFETY PROTECTIONs
Among the many numerous Safety protections installed include:
- Over-heat protection: if the temperature of the cooker surface is over 650 C, the cooker will be protected automatically
- Inner-temperature over-heat protection: when the inner temperature reaches 95 C, the cooker will be protected automatically
- High-voltage protection: once voltage is over 275 V, the cooker will shut off automatically
- Low-voltage protection: once voltage is under 95 V, the cooker will shut off automatically
- Constant-temperature over-heat protection: when the temperature of cooker surface reaches 580 C, the cooker will shut off automatically
Warnings s
ATTENTION :
Read this booklet carefully it contains important instructions for a safe
installation, use and maintenance.
Important instructions to be kept for future reference.
The following basic precautions should always be followed when using
electrical appliances:
-
Read all instructions before using the appliance.
The Appliance -
This appliance must be used only for the purpose it was expressly designed; any use NOT complying with the instructions contained in the manual is considered inappropriate and dangerous. The manufacturer is NOT responsible for possible damages caused by the inappropriate and/or unreasonable use.
-
The installation/assembly of the appliance will be made in accordance with the indications of the manufacturer. A wrong procedure may cause damages to persons, animals or objects, for which the manufacturer cannot be considered responsible.
-
Before use, check the integrity of the appliance (particularly, the integrity of the Crystal Plate which is the top glossy surface) and power cable. DO NOT operate the appliance when its housing is damaged. In case you are not sure, contact a qualified person. If the Crystal Plate or power cable is damaged, it must be replaced by the manufacturer or its service agent or a qualified technician in order to avoid a shock hazard.
-
Before powering the appliance make sure the rating (voltage and frequency) corresponding to the grid and the socket is suitable for the plug of the appliance, and that the wall socket is properly grounded.
-
Avoid the use of adapters and/or extension cables; if their use is absolutely necessary, use only materials in compliance with the current safety regulations and whose marked electrical rating should be at least as high as the electrical rating of the appliance. To prevent overloading and blown fuses, ensure that no other high-powered appliance is plugged into the same socket.
-
The appliance must NOT be switched on using external timers and/or other remote control appliances, which are not specified in this manual.
-
Only use original components & accessories provided by the manufacturer. Any nonoriginal component or accessory NOT recommended by the manufacturer (including, but not limited to, the Plate, pots and pans made of plastic, wood, etc. or with round bottoms instead of flat bottoms, made by other manufacturers or by the same manufacturer but for other models of the same capacity or otherwise) may cause injuries to persons or damage to the appliance. Doing so will void the warranty and may cause serious injury
-
Remember: If you have to use other utensils, Only Stainless steel flat based pots & pans with a diameter between 12 cm to 26 cm are usable.
The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out of the reach of children or disabled persons since they represent potential sources of danger. Location -
This appliance is NOT suitable to be used or stored near heat sources (open flame, ovens, heaters, stoves, etc.) and/or in an explosive environment (in the presence of flammable substances such as gas, vapour, mist or dust, in atmospheric conditions when, after ignition, the combustion is spread in the air). Items containing these substances should never be placed in the appliance, and never be used to clean the appliance in order to avert the risk of fire or explosion.
-
The appliance should NOT be placed on a surface, or in the vicinity of objects, which can be damaged by heat, such as carpets, curtains, textiles or plastics. DO NOT use the appliance when placed in a closed cabinet. During operation, as heat is transferred away from the appliance, the surface that the appliance is placed upon as well the surface immediately above or adjacent to it may become very hot. There should be at least 10 cm of free space from the back, left & right sides and at least 20 cm from the top of the utensil (pot, pan, etc.) placed on the Crystal Plate to allow adequate air circulation. DO NOT locate multiple portable socket outlets or power supplies at the bottom or rear of the appliance. If the appliance is operated on wooden furniture, use a protective pad to prevent damage to delicate finishes.
-
Avoid placing the power cable (and extension cable, if used) on abrasive or sharp surfaces or in positions where it can be damaged easily. Avoid placing heavy objects on the cable. The cable must NOT be placed under carpets, or covered with throw rugs, runners or similar. Arrange the cable away from the high traffic area, and where it will NOT be tripped over. DO NOT pull or carry the appliance by the cable.
-
DO NOT allow the power cable of the appliance to fall across the Crystal Plate. In addition, when using another electrical appliance, e.g. a hand held food blender, near the appliance, ensure that the power cable of the electrical appliance cannot come into contact with the Crystal Plate. The insulation on the cable could become damaged.
-
DO NOT use or store the appliance outdoors. Store and use the appliance only indoors, or in any case, protected from weather such as rain, direct radiation of the sun and dust.
Operation -
If you are using the appliance for the first time, you should:
-
a. Clean the appliance with a damp cloth, and immediately wipe dry.
DO NOT use metal scouring pads. -
b. Add oil, grease or water into the utensil (pot, pan, etc.) on top of the Crystal Plate first. DO NOT heat an empty utensil. Not doing this may lead to burning or scarring it. Hereby “utensil” is regarded as any container i.e. pot, pan, etc. placed onto the Crystal Plate.
-
c. Plug the power cable into the electric socket and switch it on. Press the ON/OFF button followed by one of 4 buttons (Soup, Fry, BBQ, Hot Pot). Heating commences. You can add food and liquids into the utensil as the cooking proceeds.
-
d. Press the ON/OFF button after you have finished cooking. The appliance will stop heating immediately and the screen will display “_____”. DO NOT switch the appliance off by pressing the wall switch. If you do, the appliance will shut off and so will the fan. If you press the ON/OFF button, the fan will continue to work until the unit cools down.
-
e. Make sure to remove any label or protective sheet that may prevent its proper functioning.
-
DO NOT:
-
cover the appliance e.g. with a hob cover, cloth or protective foil. The material could catch fire, shatter or melt if the hob is switched on by mistake or if residual heat is still present;
-
obstruct totally nor partially the air inlet & outlet;
-
insert objects or body parts inside the protection cover of the appliance;
-
switch the appliance on if the utensil is dry however, should the utensil be found dry during operation, immediately remove the utensil from the Crystal Plate and press the ON/OFF button. DO NOT switch the appliance off. The fan will continue to work until the unit cools down;
-
slide utensils into place on the Crystal Plate as this can cause scuffs and scratches. Instead, lift utensils into position on the plate;
-
place metallic objects such as knives, forks, spoons, lids, etc. or combustible materials (paper, cloth, sugar, plastic, aluminium foil, etc.) on the Crystal Plate as they can damage the plate. If this should occur, switch off the appliance and scrape off all the residues whilst still hot, using a shielded scraper blade. After the appliance had cooled down, clean the plate with a suitable ceramic hob cleaning agent;
-
place hot items on the Control Panel as this could cause damage to the electronics underneath;
-
touch the Crystal Plate of the appliance when in operation or just after switching it off as it will still be very hot and may cause scalding;
-
drop anything on the Crystal Plate. Even a light object can cause damage in certain circumstances.
-
-
During (and immediately after) the period of operation, high temperature steam may escape from the utensil. To avoid scalding:
- DO NOT
- fill liquids beyond 80% of the maximum volume if you are using a pot;
- remove the lid while heating & ensure that the lid is tightly closed during heating if you are using a pot;
- add food with its packaging (plastic wrapper, paper, foil, metal can, etc.) still attached without first removing the packaging;
- heat up food in closed containers e.g. tins or sealed jars on the Crystal Plate, as pressure can build up in the container, causing it to explode;
- move the appliance while in operation or when utensils are on the Crystal plate;
- remove the utensil during heating. Wait until heating has completed, press the ON/OFF button and then remove the utensil carefully;
- touch the Crystal Plate of the appliance except the Control Panel buttons or the Power Knob when in operation or just after switching it off as it will still be very hot and may cause scalding Always wear protective, insulated oven gloves when in contact with the utensil. DO NOT let the gloves get wet as this causes heat to transfer through the material more quickly with the risk of scalding or burning yourself. The bottom of the cooker becomes exceedingly hot as the cooker operates;
- direct steam at any person or animal & one’s hands and face should be angled away from the utensil (especially if it has a vapor hole) at all times;
- leave the appliance unsupervised during operation, especially when cooking with oil and fat. If the oil and fat ignites, DO NOT attempt to put the flames out with water. Press the ON/OFF button and use a suitable fire blanket, saucepan lid, damp towel or similar to smother the flames.
-
During operation, DO NOT touch the appliance with wet body parts, and it is recommended to have between you and the standing surface, an isolating element (for example, wearing shoes with rubber soles).
-
DO NOT soak the appliance in water or other liquids, wash it under the tap, or let any liquid flow into the internal casing of the appliance to prevent electric shock. In case of an accidental fall in water, DO NOT try to take it out, but first of all switch the appliance off.
-
Switch the wall switch OFF before unplugging the appliance. Plug and unplug the power cable firmly holding it with dry hands. Always unplug the power cable to avoid overheating and if it is NOT used for a long period, before storing, assembling & disassembling, cleaning or performing any maintenance operation. Before storing, cleaning or performing any maintenance operation, leave to cool for at least 30 minutes.
-
In case of malfunction or anomaly during the functioning, such as smoke coming out of the appliance, switch the wall switch OFF and unplug the power cable from the wall socket. Remove any utensil placed on the Crystal Plate away from the cooker and check the cause of the anomaly, if possible, with the support of a qualified person.
-
This appliance is NOT intended for commercial use but to be used in households and similar applications, such as:
- Staff kitchen areas in shops, offices and other working environments;
- By clients in dormitories hotels, motels and other residential environments;
- Bed and breakfast type environments.
-
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall NOT play with the appliance. Cleaning and user maintenance shall NOT be made by children unless they are older than 8 and supervised. Keep the appliance and its cable out of reach of children less than 8 years old.
-
Save these instructions.
USING YOUR APPLIANCE
Note: The actual Control Panel may be different from the image above. However, the functions and usage remain the same
MANUAL FUNCTION
Pressing the buttons (as shown below) on the Control Panel will light up the LED display as shown
AUTOMATIC FUNCTION
Pressing the buttons (as shown below) on the Control Panel will light up the LED display as shown:
The temperature level and duration of heating are preset and cannot be adjusted
REMINDER:
- Press the ON/OFF button after you have finished cooking. The appliance will stop heating immediately and the screen will display “_____”. DO NOT switch the appliance off by pressing the wall switch. If you do, the appliance will shut off and so will the fan.
- If you press the ON/OFF button, the fan will continue to work until the unit cools down.
CLEANING
- Disconnect the plug and wait until the unit has cooled down completely.
- Always clean cooking appliances such as pots & pans soon after use. This will prevent food from sticking to the appliance and reduce the possibility of bacterial growth. It will also reduce the likelihood of the utensils being stained or discoloured.
- Wipe all coarse soiling off using a damp cloth. Stubborn soiling may need to be removed with a shielded scraper blade.
- The appliance can be cleaned with a dish-washing agent and a damp cloth, and immediately wipe dry. It is recommended that a suitable ceramic hob cleaning agent is used to clean the Crystal Plate. DO NOT use a scrubbing brush. DO NOT use detergents or chemicals like benzene, thinner, or polishing powder.
- Never run water over the unit as malfunctions may occur if water seeps inside the appliance.
- Use a vacuum cleaner to suck up dirt from the air intake and exhaust vent
PROBLEM-SOLVING
Code | Problem | Possible Reason | Solution |
---|---|---|---|
E1 | **** |
Sounds “Be…”, stops working automatically
| Temperature sensor has short-circuited| ****
Contact authorized service centre
E2| A temperature sensor is opened
E3| Fan isn’t connected or is broken
E4| Voltage lower than 95 V
E5| Voltage higher than 275 V
E6
| ****
The temperature of heating element is more than 750 °C or around PCB is more than 70 °C
Power key is pressed but there is no illumination
| ****
Make sure the power plug is properly connected
ENVIRONMENTAL TIP
This appliance, along with all other electronic appliances, should, when it is
no longer capable of functioning, be disposed of with the least possible
environmental damage according to the local regulations in your area. In most
cases you can discard the appliance at your local recycling center.
DISPOSAL: Do not dispose of this product as unsorted municipal waste.
Collection of such waste separately for special treatment is necessary
.
SPECIFICATION
- MODEL PPIC832
- FREQUENCY 50 – 60 Hz
- POWER 2000 W
- SAFETY MARK 190153-24
WARRANTY
Warranty Conditions
- This warranty provides against defective materials and manufacturing faults for two years from the date of purchase of the appliance covering the Motor only, subject to correct usage of the appliance. The warranty on the Compressor is 10 years subject to the same conditions as above.
- This warranty also does not cover normal wear and tear, replacement of consumable materials and accessories, and the cost of maintenance of the appliance.
- This warranty does not cover the repair or replacement of part/s damaged by misuse, accidents, negligence, alterations, or modifications in any way, or repairs done by any repair organization without the prior consent of PowerPac Electrical Pte Ltd.
- Repair and service are to be performed at: 5 Changi South Lane #03 01 Singapore 486045. A transport fee will be charged for personal doorstep service.
- The original purchaser of the appliance must furnish proof of purchase to our Service Centre with the email or number as registered during the submission of the warranty when this appliance is sent for repair/service. Failure to do so may delay the receipt of said repair/service by the customer.
- Under no circumstances whatsoever shall the serial number be erased, defaced or altered by the customer and/or his representatives, or the dealer and/or his agents. Failure to ensure this shall invalidate the warranty.
- This warranty is deemed to be void if the defect is caused by the attack of household pests, fire, lightning, natural disasters, pollution, abnormal voltage or the usage of generators.
- This warranty is valid in Singapore only.
- This warranty will be honored subject to the customer’s registration of the warranty inclusive of original invoice or valid purchase receipt. Failure to present these documents will result in denial of service. However, if the customer still requests that the defective appliance be repaired, PowerPac Electrical Pte Ltd may, at its discretion, repair the appliance but impose a labour charge, as well as the costs of the replacement parts, to be borne solely by the customer.
- Please refer to the attached picture for the location of one of our appliance’s serial numbers, as an example
Please complete the online registration warranty form available on our website. There is no further requirement to send us any hard copy as part of our efforts to save the environment. In accordance with the terms and conditions of this limited warranty as stated above, PowerPac Electrical Pte Ltd, at its expense shall provide free services for the appliance within the warranty period from its date of purchase from our Authorised dealers.
PowerPac Electrical Pte Ltd
- sales@powerpac.com.sg
- www.powerpac.com.sg
- PowerPacSG
- @powerpacsg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>