Bauer 59533 Drain Cleaner with Power Feed User Guide
- June 1, 2024
- BAUER
Table of Contents
22201E-B
QUICK START GUIDE
50ft DRAIN CLEANER WITH POWER-FEED59533
59533 Drain Cleaner with Power Feed
NOTICE
20% Restocking Fee on all drain cleaner returns
WARNING
To prevent serious injury:
Read and understand user manual before set up and/or use. 23h
OPERATION
-
Wear water- and chemical-resistant gloves inside heavy-duty work gloves
-
Install cutting head; use tool to remove
-
Position within 2 feet of drain opening
CAUTION
DO NOT PUT ROTATION SWITCH INTO REVERSE FOR MORE THAN A FEW SECONDS AT A TIME Reverse position is only to momentarily change directionto free jammed cable -
Plug in and press reset button on GFCI
-
Insert into drain as far as possible
-
Set to forward
-
Hold cable
-
Set power feed to forward
-
Press foot switch
IMPORTANT – SEE TIPS ON BACK
TIPS
When the cable hits a blockage, retract the cable back and forthto clear the blockage.
If the cable stops and tension builds, release foot switch, wait for tension to release, then pull cable back manually before proceeding.
ACCESSORIES
| Arrowhead
Starting tool for piercing stoppage and allowing water to drain
---|---
| Boring Bulb Cutter
Tool for removing loose objects
| C-Cutter
Tool for grease stoppages
| Side Cutter
Finishing tool for cleaning off pipe walls
For technical questions, please call
1-888-866-5797.
26677 Agoura Road | Calabasas, CA 91302
http://www.harbortreight.com