Bauer 56877 Electric Pressure Washer with Hose Reel Owner’s Manual

56877 Electric Pressure Washer with Hose Reel

Owner’s Manual

56877 Electric Pressure Washer with Hose Reel

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no  number). Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright 2023 by Harbor Freight Tools® . All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.

WARNING
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.

| Warning Symbols and Definitions
---|---
DANGER| This is the safety alert symbol.  It is used to alert you to potential personal injury hazards.  Obey all safety messages that follow this symbol to avoid possible injury or death.
WARNING| Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
CAUTION| Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
NOTICE| Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
CAUTION| Addresses practices not related to personal injury.

IMPORTANT SAFETY INSTRUCTIONS

Warning – When using this product basic precautions should always be followed, including the following:

Safety Warnings

1. Read all the instructions before using the product.

2. To reduce the risk of injury, close supervision is necessary when a product is used near children.

3. Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls.

4. Stay alert – watch what you are doing.

5. Do not operate the product when fatigued or under the influence of medication, alcohol or drugs.

6. Keep operating area clear of all persons.

7. Do not overreach or stand on unstable support. Keep good footing and balance at all times.

8. Follow the maintenance instructions specified in the manual.

9. This product is provided with a ground fault circuit interrupter (GFCI) built into the power cord plug. If replacement of the plug or cord is needed, use only identical replacement parts.

10. WARNING – Risk of injection or injury– do not direct discharge stream at persons.

11. Connect to individual branch circuit only.

12. WARNING – To reduce the risk of electrocution, keep all connections dry and off the ground.
    Do not touch plug with wet hands.

13. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the pressure washer. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

14. Gucci precaution Owns Test GFCI (Ground Fault Circuit Interrupter) before each use as follows:
    a. Plug GFCI into power outlet and press
    reset button. Indicator should turn on.
    b. Press test button. Indicator should turn off.
    c. Press reset button again for use.

Do not use if above test fails.
The GFCI device does not protect against electrical shock due to contact with both circuit conductors or a fault in any wiring supplying the GFCI device. to allow Gucci unit to function properly, extension cords Must knot Be used with this pressure washer.

Set up precautions

1. The work area should have adequate drainage to reduce the possibility of a fall or electric shock due to wet surfaces.

2. Wear ANSI-approved safety goggles during set up and use.

3. Only feed cold, clean water through this tool. Pressure washer detergent may be used in the Detergent Tank only. Do not use caustic materials, solvents, flammable materials, or detergents not designed for pressure washers.
   Use of any such material can cause injury, or damage this tool or personal property.

4. Prior to starting the Pressure Washer in cold weather, check all of the parts of the unit to make sure ice has not formed. Do not store the unit anywhere that the temperature will fall near 32° F (0° C).

Operating precautions

1. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing pressure washers. Such preventive safety measures reduce the risk of starting the pressure washer accidentally.
2. Do not leave the equipment unattended when it is running. Turn off the equipment before leaving the work area.
3. Wear ANSI-approved safety goggles and heavy-duty nonslip rubber work boots during use.
4. Use only accessories that are recommended by Harbor Freight Tools for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another one.
5. This product must continuously run with cold water only. Never use hot water. Do not dry run this product. Dry running will cause serious damage to the seals.
6. To avoid electrical shock, never start and run the Pressure Washer in the rain. Never allow water to leak into the Body of the Pressure Washer. Do not direct discharge stream at the PressureWasher itself or at other live electrical equipment.
7. Do not allow the GFCI Plug to become wet. Always place the GFCI Plug in a dry location and as far away as possible from the object being sprayed.
8. DO NOT use an extension cord with this product.
9. When using the Pressure Washer, always maintain a firm grip on the Spray Gun. Squeezing the Trigger of the Spray Gun causes a kickback force.
10. Do not feed already-pressurized water (such as that from another pressure washer) into this washer. 11. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure.
11. Use the correct equipment for the application. Do not modify the equipment and do not use the equipment for a purpose for which it is not intended.
12. If water is leaking out of the Pressure Washer immediately turn off the unit. Unplug the Pressure Washer, and discharge all pressure before tightening fittings or having repair work done by a qualified technician.
13. The high pressure water flow can damage the work surface if not used properly.
    Always test the spray in an open area first. 15.
    Injection Hazard. The high pressure water jet produced by this tool can cut skin or cause injury to hands or eyes.
    Do not allow spray to strike you and do not spray toward people or animals.
    Do not spray the tool itself or any electrical source.
    16. This Pressure Washer is intended for outdoor residential use only.
    17. in case of an emergency during use, immediately release the trigger on the spray handle, turn the power switch off and then unplug the unit. Do not set the spray handle down without turning off the power switch.

Vibration Hazard:
This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury:

1. Anyone using vibrating tools regularly or for an  extended period should first be examined by a doctor and then have regular medical checkups to ensure medical problems are not being caused or worsened from use. Pregnant woodener people who have  impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any medical or physical symptoms related to vibration (such as tingling, numbness, and white or blue  fingers), seek medical advice as soon as possible.
2. Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury.
3. Wear suitable gloves to reduce the vibration effects on the user.
4. Use tools with the lowest vibration when there is a choice between different processes.
5. Include vibration-free periods each day of work.
6. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately.

Service precautions
Ground Fault circuit interrupter protection
This pressure washer is provided with a ground-fault circuit-interrupter (GFCI) built into the plug of the power-supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become necessary, use only identical replacement parts that include GFCI protection.

Servicing a Double-insulated appliance
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing a double- insulated product  requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace. A double-insulated product is marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED.” The symbol may also be marked on the product.

Symbiology

| Double Insulated
---|---
V| Volts
| Alternating Current
A| Amperes
| WARNING marking concerning Risk of Eye Injury.  Wear ANSI-approved safety goggles with side shields.
---|---
| Read the manual before set-up and/or use.
| WARNING marking concerning Risk of Electric Shock.
Properly connect power cord to appropriate outlet.
| WARNING marking concerning Risk of Injection.
Do not direct spray at any person or animal.

Specifications

Setup – Before use:

read the entire important Safety information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

WARNING
To prevent Serious injurie From accidental Operation:
turn the power Switch of the tool off, unplug the tool from its electrical outlet, shut off the water supply and safely discharge all residual water pressure from the unit before assembling or making any adjustments to the tool.

Functions

Assembly
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 18.
Remove shipping caps from Water Inlet/Outlet.

Attach Wheels

1. Insert the Wheel Axle (37) through the Wheel (36).
2. Insert the Axle on the Wheel through the hole in the Lower Frame (27).
3. Place a Washer (35) over the end of the Axle and secure it in place with an R-Pin (34).
4.  Repeat the previous steps for the other Wheel.

Attach Handle

1. Hold the Spring Button (45) near each end of the Handle (1) in while inserting the ends into the Lower Frame (27).
   caution! Be careful to avoid pinching your hands.

2. Slide the Handle into the Lower Frame until both Spring Buttons pop out into place.

Attach Gun Holder

1. Position Gun Holder (3) against the left side of the Handle (1) as shown.
2. Align the holes in the Gun Holder with the holes in the Handle.
3. Attach the Gun Holder to the Handle with two Screws (4).

Attach Storage panel and cord Hook

1. Position Storage Panel (6) against the right side of the Handle (1) as shown.
2. Align the holes in the Storage Panel with the holes in the Handle.
3. Attach the Storage Panel to the Handle with two Screws (4).
4. Place the Cord Hook Bracket (11) against the right edge of the Handle, aligning it with the hole.
5. Place the Cord Hook (12) over its Bracket with the end pointing upwards.
6. Secure the Cord Hook to the Bracket and Handle using the Cord Hook Screw (13).

Connect High-pressure Hose

1. Connect High-Pressure Hose (41) to connection on back of Pressure Washer by pushing Hose in as far as it will go, then threading coupler on tightly.
2. Connect High-Pressure Hose to connection under Gun Handle (61) by pushing Hose in as far as it will go, then threading coupler on tightly.

Operating instructions

Read the entire important Safety information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Work piece and Work area Set up

1. Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent distraction and injury.

2. CHECK THE WATER SUPPLY. Prior to using the Pressure Washer for the first time, it is ESSENTIAL to verify that the water supply is adequate. The Pressure Washer needs TWICE the water supply (or volume) of the listed water output (1.3 GPM). This  Pressure Washer will need about 2.6-3 GPM to operate correctly and efficiently. If the water is being supplied by a well/pump, make certain that the well/pump produces enough water to keep up with the Pressure Washer’s water demands. Water supply  hoses should be heavy-duty. The flow rate of the water supply must never be allowed to fall below 2.6 GPM. To determine the water supply’s flow rate:
   Run the water at full for 30 seconds into a 5 gallon container, then measure the amount of water in the container and multiply by 2.
   caution: If the Pressure Washer is run  with an inadequate water supply, the pump may cavitate. Cavitation causes the pump to operate loudly and will damage it.

3. USE PROPER ELECTRICAL SUPPLY.
   This unit uses a large amount of current, especially during start-up. Turn off power switch, then connect this unit only to a dedicated household circuit with no additional loads (running devices) connected to it. For best results, use the outletthat is nearest  to the circuit breaker panel.

4. PLAN OUT THE JOB. Plan out areas to be cleaned, how many sessions will be necessary, and how long the individual sessions will need to be. Plan to clean the higher areas first. Plan a safe direction for runoff, and plan on working your way in that direction.

5. Clear the area of all objects that are not being cleaned. If any water-sensitive or delicate items cannot be moved, cover them. If detergent is to be used, cover or remove any plants or animals.
   Disconnect power to and protect any nearby electrical wiring. Close windows and doors.

6. Place the Pressure Washer in a location which is protected from runoff. The location should be close enough so that the water supply hose will reach every portion of the area with some slack for movement.

7. Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cordite possible damage. The power cord must reach the work area with enough extra length to allow free movement while working.

tool Set up

WARNING
TO prevent Serious injurie From accidental Operation: turn the power Switch off, unplug it from its electrical outlet, and relieve all pressure before making adjustments or installing accessories.

1. MAKE SURE THE WATER INLET  STRAINER AND WAND ARE FREE OF MINERAL BUILDUP OR DEBRIS.

2. Insert Wand into end of Spray Gun, press in and twist Wand clockwise until it locks into place.

3.  Run water through water supply hose (not included) to remove any debris. Turn off water.

4. Connect water supply hose to Water Inlet on front of Pressure Washer.
   Tighten securely.

5. Nozzle Selection:
   • This Pressure Washer includes several Nozzles with different spray patterns. Select the Nozzle that suits your requirements.
   caution! to prevent injurie and property Damage, use HiGHiMpact Spray With caution.
   • The Black Nozzle is used specifically for dispensing detergent at lower pressure.
   • Pull back on the collar at the end of the Wand, insert the Nozzle, and release the collar so that it holds the Nozzle securely in place.

General Operating instructions

WARNING
to prevent electric Shocks ands Dearth: test Ground Fault circuit interrupter (Gucci) before each use. the Gucci does not protect against electrical shock due to contact with both circuit conductors or a fault in any wiring supplying in this device. Do not alter or disable the Gucci. Do not use an extension cord.
This unit is intended for light to moderate cleaning. It is not intended for paint stripping or deep concrete cleaning.

1. Uncoil High-Pressure Hose completely. Do not use pressure Washer if Hose is kinked or looped.

2.  The Spray Gun includes a trigger safety lock.
   • Swing the trigger safety lock flat against the back side of the trigger right before spraying.
   • Swing the trigger safety lock out to engage with the rest of the Spray Gun after use.

3. Point Spray Gun in safe direction, press Trigger to release all pressure, then release Trigger.

4. Plug GFCI into dedicated, grounded 120V outlet, then:
   a. Press reSet button. Indicator should light up.
   b. Press teSt button. Indicator should turn off.
   c. Preset reSet button again. Indicator should light up, unit is ready for use.

5. Turn on water supply.

6. Turn Power Switch to ON position.
   note: If the unit does not turn on or turns off suddenly, turn Power Switch to OFF position, then check and reset the GFCI.
   notice: Pressure Washer will run only while Trigger is pressed. When trigger is released, Pump will turn off. Do not leave idle for more than one minute without spraying.

7.  test spray an inconspicuous area:
   a. Set Nozzle to low-impact fan spray.
   b. Point Spray Gun at 45° angle to test area. Release trigger safety lock, then press Trigger. Be aware of kick back.
   c. Spray test area, adjusting pressure, as needed, by changing distance from surface and/or adjusting Nozzle.
   d. If using detergent:
   • Turn off unit, remove Wand, fill Detergent Tank, then attach Detergent Tank.
   • Turn on unit, then spray area with detergent according to detergent manufacturer’s instructions. Scrub surface as necessary.
   • Turn off unit, remove Detergent Tank, then attach Wand.
   • Set Nozzle to low-impact fan spray.
   • Turn on unit, then spray area to rinse off detergent, adjusting pressure. as needed, by changing distance from surface and/or adjusting Nozzle.
   e. Inspect test area for damage or discoloration.
   cleaning Windows
   a. Inspect caulking and/or glazing. Inspect trim. DO not pressure Wash Windows if caulking/Glazing/trim is knot intact.
   b. If needed, apply detergent according to manufacturer’s instructions.
   c. Set Nozzle to low-impact fan spray. DO not use HiGHiMpact Spray, Forces May Break Glassy.
   d. Point Spray Gun at 45° angle to, and 4 feet away from, window. Spray window.
   cleaning Wood
   DO not clean WOOD that is Hoot Or in Direct Sunlight.
   a. If needed, apply wood cleaning detergent according to manufacturer’s instructions. For vertical surfaces, apply detergent from bottom to top.
   b. Scrub stained areas as needed.
   c. Set Nozzle to low-impact fan spray.
   d. Point Spray Gun at 45°. Spray surface, working with the grain of the wood.
   e. Let surface dry completely, then apply stain or sealer, as needed, according to manufacturer’s instructions.
   cleaning Brick and Mortar
   a. Inspect mortar, patching as needed. Let mortar cure according to manufacturer’s instructions.
   b. Soak surface prior to applying detergent.
   c. If needed, apply brick cleaning detergent according to manufacturer’s instructions. For vertical surfaces, apply detergent from bottom to top.
   d. Scrub stained areas as needed.
   e. Set Nozzle to low-impact fan spray.
   to prevent Damage, Only use LOW-impacts Setting.
   f. Point Spray Gun at 45°. Spray surface.
   g. Let surface dry completely, then apply sealer, as needed, according to manufacturer’s instructions as needed.

8. When finished:
   • Release Trigger, then set Trigger Safety Lock.
   • Turn off Power Switch.
   • Turn off water supply.
   • Unplug the unit.
   • Point Nozzle in safe direction, press Trigger to release all pressure, then release Trigger.
   • Disconnect water supply hose.
   • Disconnect High-Pressure Hose from unit.
   • Disconnect High-Pressure
   Hose from Spray Gun.

9. important: clean the nozzles after every use to Maintain Spraying power and prevent pup Damage.
   • Remove Wand from Spray Gun.
   • Remove Nozzle from Wand by turning Nozzle clockwise.
   • Push Nozzle Tip Cleaner into tip to push out debris and buildup.
   • Remove Nozzle Tip Cleaner and back-flush water through Nozzle.
   • Reattach Nozzle to Wand.
   • Clean and store according to user-Maintenance instructions on page 14.

user-Maintenance instructions

WARNING
to prevent Serious injurie From accidental Operation: turn the power Switch of the tool off, unplug the tool from its electrical outlet, shut off the water supply and safely discharge all residual water pressure from the unit before performing any inspection, maintenance, or cleaning procedures. to prevent Serious injurie From tool Failure:
Do not use damaged equipment. if abnormal noise or vibration occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication

1. Before each use, inspect the general condition of the tool. Check for:
   • loose hardware,
   • misalignment or binding of moving parts,
   • damaged cord/electrical wiring,
   • damaged high-pressure hose/accessories,
   • cracked or broken parts, and
   • any other condition that may affect its safe operation.

2.  after use:
   • Drain water by tipping the unit. Frost will damage the unit if it contains water.
   • Flush Detergent Tank with water.
   • Use only a clean cloth and mild detergent to clean the body of the Pressure Washer. Do not use solvents.
   • Do not immerse any part of the tool in liquid.
   • Dry off any remaining water on all parts and fittings.
   • Remove mineral deposits from the nozzle using a thin, stiff wire brush.

3. periodically, remove mineral buildup. Unplug the unit and lay it face down. Fill Water Inlet with de-mineralizing solution, following solution manufacturer’s instructions. Drain de-mineralizing solution out of Water Inlet and rinse out inlet thoroughly before use.

4. Warning! to prevent Serious injurie: if the supply cord or Gucci unit of this power tool is damaged, it must be replaced only by a qualified service technician.

Storage

1. Place accessories, High-Pressure Hose and Power Cord in their storage locations.
2. Store in a dry, frost-free room. Flush the unit with automotive antifreeze prior to long-term storage. Dispose of antifreeze according to local ordinances.

troubleshooting

2.No power at outlet.
3.GFCI circuit breaker tripped.
4.Internal damage or wear. (Carbon brushes or
switch, for example.)| 1.Check that cord is plugged in.
2.Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.
3.Press reset button on GFCI unit on cord.
4.Have a qualified technician service tool.
Pressure Washer stops suddenly| 1.GFCI circuit breaker tripped.
2.Water leaking from housing.| 1.Press reset button on GFCI unit on cord.
2.SHOCK HAZARD! IMMEDIATELY discontinue use. Have the unit repaired by a qualified
technician before further use.
Output pressure varies| 1.Not enough water supply.
2.Air in water supply.
3.Water Inlet Filter is clogged.
4.Nozzle not attached to Spray Gun.
5.Nozzle is clogged.
6.Nozzle has mineral build up.
7.Water supply hose is too long or narrow.
8.Internal valves or seals may be worn or sticking.| 1.Check water supply hose for kinks, leaks, or blockage. Open faucet all the way.
2.Check that all connections are tight.
3.Remove Filter and clean.
4.Pressure is created by the Nozzle, not the Spray Gun. Attach Nozzle to Spray Gun.
5.Remove Nozzle and clean with Nozzle Tip Cleaner.
6.Remove Nozzle and clean with de-mineralizing solution.
7.Shorten the length of the water supply hose if needed to increase pressure.
8.Have a qualified technician service tool.
Trigger does not depress| Safety lock is still engaged.| Press Trigger Safety Lock on the bottom of the Spray Gun to release the Safety Lock.
Detergent will not dispense| Incorrect detergent type.| Check that the detergent is the recommended type of detergent. Clean out dispenser and replace with correct type if needed.
Performance decreases over time| Clogged with mineral deposits.| Clean unit with de-mineralizing solution.

** Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.
please read the Following carefully
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
record product’s Serial number Here:
note: if product has no serial number, record month and year of purchase instead.
note:** Replacement parts may be available for this item.
Visit harborfreight.com/parts for a list of in stock parts. Reference UPC 193175509376.

parts List and assembly Diagram

parts List

assembly Diagram

Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect  resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

26677 Agoura road • Calabasas, ca 91302 • 1-888-866-5797

Documents / Resources

| Bauer 56877 Electric Pressure Washer with Hose Reel [pdf] Owner's Manual
56877 Electric Pressure Washer with Hose Reel, 56877, Electric Pressure Washer with Hose Reel, 56877 Electric Pressure Washer, Electric Pressure Washer, Pressure Washer, Washer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>