Bauer 64609-UPC Metal Shears Owner’s Manual

Bauer 64609-UPC Metal Shears Owner’s Manual

Product Information

The product is a power tool designed for use in various applications. The product comes with a user manual that includes safety warnings and precautions, assembly, operating, inspection, maintenance, and cleaning procedures. The product has a serial number that can be written in the back of the manual. The product requires assembly, and tools required for assembly and service may not be included. The product should be used in a clean and well- lit work area, away from explosive atmospheres and children. The product has electrical components that should be used with caution to avoid electric shock.

Product Usage Instructions

1. Before using the product, read the user manual carefully to understand all safety warnings and precautions, assembly, operating, inspection, maintenance, and cleaning procedures.
2. When unpacking the product, ensure that it is intact and undamaged. If any parts are missing or broken, call 1-888-866-5797 immediately.
3. Assemble the product using the instructions provided in the user manual. Ensure that all required tools are available before starting the assembly.
4. Place the product in a clean and well-lit work area away from children and explosive atmospheres.
5. Ensure that the power tool plugs match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
6. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators while using the product to reduce the risk of electric shock.
7. Follow the operating instructions provided in the user manual to use the product effectively and safely.
8. Perform regular maintenance and cleaning procedures as described in the user manual to ensure the product’s longevity and safe operation.
9. Keep the user manual and the receipt in a safe and dry place for future reference.

Save This Manual
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com

When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
Copyright© 2021 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

WARNING SYMBOLS AND DEFINITIONS

| This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

| Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
| Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
| Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

|

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

General Power Tool Safety Warnings

Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

• Keep work area clean and well lit.
  Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
• Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area.
• Avoid unintentional starting. Prepare to begin work before turning on the tool.
• Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
• This product is not a toy. Keep it out of reach of children.
• People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should:
  • Avoid operating alone.
  • Do not use with Trigger locked on.
  • Properly maintain and inspect to avoid electrical shock.
  • Properly ground power cord. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.
• The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Power tool use and care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
• Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

Grounding

TO PREVENT ELECTRIC SHOCK AND DEATH FROM
INCORRECT GROUNDING WIRE CONNECTION:
Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

Grounded Tools: Tools with Three Prong Plugs

1. Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock.(See 3-Prong Plug and Outlet.)
2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See 3-Prong Plug and Outlet.)
3. The tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the preceding illustration.(See 3-Prong Plug and Outlet.)

Double Insulated Tools: Tools with Two Prong Plugs

1. Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code.
2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration.(See Outlets for 2-Prong Plug.)

Extension Cords

1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord.
2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. (See Table A.)
3. The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Table A.)
4. When using more than one extension cord to make up the total length, make sure each cord contains at least the minimum wire size required. (See Table A.)
5. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Table A.)
6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.
7. Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.
8. Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.

*TABLE A: RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS (120/240 VOLT)**

NAMEPLATE

AMPERES

(at full load)

| EXTENSION CORD LENGTH
25´| 50´| 75´| 100´| 150´
0 – 2.0| 18| 18| 18| 18| 16
2.1 – 3.4| 18| 18| 18| 16| 14
3.5 – 5.0| 18| 18| 16| 14| 12
5.1 – 7.0| 18| 16| 14| 12| 12
7.1 – 12.0| 18| 14| 12| 10| –
12.1 – 16.0| 14| 12| 10| –| –
16.1 – 20.0| 12| 10| –| –| –
* Based on limiting the line voltage drop to five volts at 150% of the rated amperes.

Symbology

| Double Insulated
---|---
| Volts
| Alternating Current
****| Amperes
n0 xxxx/min.| No Load Revolutions per Minute (RPM)
| WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved safety goggles with side shields.
---|---
| Read the manual before set-up and/or use.
| WARNING marking concerning Risk of Fire.

Do not cover ventilation ducts.

Keep flammable objects away.

| WARNING marking concerning Risk of Electric Shock.

Properly connect power cord

to appropriate outlet.

Specifications

Setup – Before Use:

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Functions

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Setting and Testing

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Make sure that the Trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section

Tool Setup

1. Loosen the three hex head bolts using the Hex Wrench provided with this tool.
2. Firmly grip the cutter head and twist it to the desired position.
3. Tighten the three hex bolts to keep the Cutter Head in that position.

Workpiece and Work Area Set Up

1. Designate a work area that is clean and well lit. The work area must not allow access by children or pets to prevent distraction and injury.
2. Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to allow free movement while working.
3. Secure loose workpieces using a vise or clamps (not included) to prevent movement while working.
4. There must not be objects, such as utility lines, nearby that will present a hazard while working.
5. Workpiece thickness should not exceed cutting capacity in specifications chart.
6. Lubricate workpiece before cutting, use machine oil on steel and mineral spirits on aluminum.

General Instructions for Use

1. Make sure that the Trigger is in the off-position, then plug in the tool.
2. Squeeze Trigger to activate the Shear. Release Trigger to turn off the Shear.
3. For continuous operation, press the Trigger Lock on the side of the handle. The Trigger Lock will deactivate once the Trigger is released.
4. To prevent a jam, keep the blades firmly pressed against the workpiece with even pressure.
5. If Shear becomes jammed during cutting, release Trigger and unplug tool immediately.
6. To prevent accidents, turn off the tool and unplug it after use. Clean, then store the tool indoors out of children’s reach.

Maintenance and Servicing Instructions

Procedures not specifically explained in this manual must be performed only by a qualified technician.

• TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.
• TO PREVENT SERIOUS INJURY FROM TOOL FAILURE : Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.

Cleaning, Maintenance, and Lubrication

1. BEFORE EACH US E, inspect the general condition of the tool. Check for:
   • loose hardware,
   • misalignment or binding of moving parts,
   • damaged cord/electrical wiring,
   • cracked or broken parts, and
   • any other condition that may affect its safe operation.
2. AFTER USE , wipe external surfaces of the tool with clean cloth.
3. CAUTION! If the plug or the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.

Blade Maintenance

1. Unplug the tool.

2. Using the Hex Wrench provided with this tool, remove the two Head Bolts.
   Note : The three Blades and the two Bushings will be loose.

3. Clean, replace or sharpen the blades as required. Replace blades as a set only.

4. Reassemble by repositioning the Blades, and Bushings as illustrated in Figure B.

5. Replace the Head Bolts and tighten them securely.

6. Test the product to be sure that it is working properly.

7. The Left and Right Blades are slotted. They can be adjusted to change the direction of the curl of waste material. To adjust:

   • Unplug the tool.
   • Loosen the two Head Bolts.
   • Make a slight adjustment to the Left or Right Blade as needed.
   • Tighten the Head Bolts.
   • Test the direction of the waste curl and repeat the steps above as needed.
     Note : If the Head Bolts are overtightened, then the Center Blade will not move freely enough, causing premature wear, or possibly preventing the tool from operating. If the Head Bolts are not tight enough, the tool will not make a smooth cut in the material.

Troubleshooting

2.   No power at outlet.

3.   Tool’s thermal reset breaker tripped (if equipped).

4.   Internal damage or wear. (Carbon brushes or Trigger, for example.)

| 1.   Check that cord is plugged in.

2.   Check power at outlet. If outlet is unpowered, turn off tool and check circuit breaker.

If breaker is tripped, make sure circuit is right capacity for tool and circuit has no other loads.

3.   Turn off tool and allow to cool. Press reset button on tool.

4.   Have technician service tool.

Tool operates slowly.| 1.   Forcing tool to work too fast.

2.   Extension cord too long or cord diameter too small.

| 1.   Allow tool to work at its own rate.

2.   Eliminate use of extension cord. If an extension cord is needed, use one with the proper diameter for its length and load. See Extension Cords

in Grounding section on page 4.

Performance decreases over time.| 1.   Carbon brushes worn or damaged.

2.   Blade(s) dull or damaged.

| 1.   Have qualified technician replace brushes.

2.   Keep blade(s) sharp and replace as needed.

Excessive noise

or rattling.

| Internal damage or wear. (Carbon

brushes or bearings, for example.)

| Have technician service tool.
Overheating.| 1.   Forcing tool to work too fast.

2.   Blocked motor housing vents.

3.   Motor being strained by long or small diameter extension cord.

| 1.   Allow tool to work at its own rate.

2.   Wear ANSI-approved safety goggles and NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air.

3.   Eliminate use of extension cord. If an extension cord is needed, use one with the proper diameter for its length and load. See Extension Cords

in Grounding section on page 4.

Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.

Record Product’s Serial Number Here :
Note : If product has no serial number, record month and year of purchase instead.
Note : Replacement parts are not available for this item. Refer to UPC 193175462732.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
26677 Agoura Road · Calabasas, CA 91302 · 1-888-866-5797

For technical questions, please call 1-888-866-5797.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>