bright starts 11565 Bounce Baby 2 in 1 Activity Jumper and Table User Manual
- May 15, 2024
- bright starts
Table of Contents
11565/12663-MEWS Bounce
Bounce Baby™
2-in-1 Activity Jumper & Table
Activity Jumper
brightstarts.com
11565 Bounce Baby 2 in 1 Activity Jumper and Table
IMPORTANT ! KEEP FOR REFER ENCE
WARNING
TO PREVENT SERIOUS INJURY OR DEATH:
-
Use the product ONLY if the child meets ALL of the following conditions:
…Is at least 6 months of age.
…Can sit up unassisted.
…Is less than 30” tall (76.2 cm).
…Weighs less than 25 lbs. (11 kg). -
DO NOT use the product in dangerous conditions or situations:
-
DO NOT allow children who can stand or walk on their own to sit in the seat of the product.
-
ALWAYS keep child in view while the child is in product. Never leave child unattended.
-
NEVER move the unit while the child is in the seat.
-
DO NOT add additional strings or straps to product.
-
DO NOT use any hardware or parts other than that supplied.
FALL HAZARD:
Babies can FALL from unit resulting in head injuries.
- NEVER leave child unattended. ALWAYS keep child in view while the child is in product.
- NEVER use near stairs.
- To avoid tip over, place the product on a flat, level surface.
- DO NOT place the product on an elevated surface.
- A child’s movement can slide the product.
- DO NOT place baby in the toy storage bag. The toy storage bag is not a seat.
- REMOVE bounce pad in activity table mode. DO NOT allow child to stand, jump, or play on bounce pad in activity table mode.
STRANGULATION HAZARD:
Strings can cause STRANGULATION.
- DO NOT place items with a string around child’s neck, such as hood strings or pacifier cords.
- DO NOT suspend strings over product or attach strings to toys.
- For indoor use only.
IMPORTANT
- Adult assembly required.
- Please read all instructions before assembly and use.
- Care should be taken in unpacking and assembly.
- Examine product frequently for damaged, missing, or loose parts.
- DO NOT use if any parts are missing, damaged, or broken.
- Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
Battery Information
The product requires (2) size AA (LR6) alkaline batteries (not included).
CAUTION: Follow the battery guidelines in this section. Otherwise,
battery life may be shortened, or the batteries may leak or rupture.
- Always keep batteries away from children.
- Do not mix old and new batteries.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Install the batteries so that the polarity of each one matches the markings in the battery compartment.
- Do not short-circuit the batteries.
- Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
- Remove exhausted batteries from the battery compartment.
- Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
- Please use the correct disposal method for batteries.
- Remove batteries before putting the product into storage for a prolonged period of time.
- Weak batteries cause erratic product operation, including distorted sound, dimming or failing light, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
- Do not dispose of product or batteries in fire, batteries may explode or leak.
This symbol indicates that the product is not to be disposed of in household waste, as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling and collection information.
Care and Cleaning
- Fabric Seat – Machine wash the fabric seat in cold water. Use a gentle wash cycle with no bleach. Tumble dry, using low heat.
- Plastic Parts – Wipe clean with damp cloth and mild soap. Air dry. Do not immerse in water.
- Toy Storage Bag – Wipe clean with damp cloth. Air dry. Do not use machine wash.
Parts List
Part | Qty. | Description |
---|---|---|
1 | 3 | Leg |
2 | 3 | Foot |
3 | 1 | Table Top |
4 | 1 | Bounce Pad |
5 | 1 | Tray Insert |
6 | 1 | Frog Toy Station |
7 | 3 | Toy Station Hub |
8 | 1 | Spinning Bees Toy Station |
9 | 1 | Dragonfly Toy Station |
10 | 1 | Snail Toy Station |
11 | 1 | Fish Toy Station Hub |
12 | 1 | Fish Toy Station |
13 | 1 | Seat carrier with wheels |
14 | 1 | Seat Pad |
15 | 1 | Toy Storage Bag |
not included
|
---|---
Frog Toy Station Operation
Adjusting Bounce Pad Height
Removing of batteries for Frog Toy Station
Activity Table mode with Toy Storage
FCC Statement / CAN ICES-3 (B) / NMB-3(B)
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Find us on Facebook and Instagram @brightstarts
Toys • Activity Gyms • Bouncers • Rockers • Swings
Activity Centers • Walkers • Door Jumpers
brightstarts.com
MANUFACTURED FOR ©2023 KIDS2, INC.
www.kids2.com/help
KIDS2, INC.
ATLANTA, GA USA 30305 • 1-800-230-8190
IMPORTED BY
SUMMER INFANT (USA) INC. 1275 PARK EAST DRIVE, WOONSOCKET, RI 02895 USA •
1-401-671-6551
KIDS2 CANADA CO.
PO BOX 54059, RPA LAWRENCE PLAZA, TORONTO, ON. M6A 3B7
KIDS2 AUSTRALIA PTY LIMITED
CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894-1855
KIDS2 JAPAN K.K. c/o ARK Outsourcing KK
4-3-5-704, Ebisu, Shibuya-ku, Tokyo, Japan 150-0013 • (03) 5322-6081
KIDS2 UK LTD.
GROUND FLOOR, SUITE A1A, BREAKSPEAR PARK, BREAKSPEAR WAY, HEMEL HEMPSTEAD,
HP2 4TZ • +44 01582 816 080
KIDS2 EUROPE BV
5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS • +31 20 2410934
KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488
MADE IN CHINA
EN 11565_12663_6MEWS_IS120523
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>