bright starts 12228-ES Baby Bouncer Soothing Vibrations Infant Seat User Manual
- May 15, 2024
- bright starts
Table of Contents
- bright starts 12228-ES Baby Bouncer Soothing Vibrations Infant Seat
- Product Information
- Product Description
- Product Usage Instructions
- FAQ
- Battery Information
- Parts List and Drawing
- INSTALLATION
- Using the Seat Restraint
- Storage and Travel
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
bright starts 12228-ES Baby Bouncer Soothing Vibrations Infant Seat
Product Information
Specifications
- Brand: Flamingo Vibes
- Model: 12228-ES
- Website: brightstarts.com
- Battery Requirement: (1) size C/LR14 (1.5V) alkaline batteries (not included)
Product Description
The Flamingo Vibes product includes the following components:
- (1) Base frame tube
- (1) Left base frame member
- (1) Right base frame member
- (1) Left backrest tube
- (1) Right backrest tube
- (1) Footrest wire
- (1) Vibration unit
- (1) Seat pad
- (1) Toy bar with toys
Product Usage Instructions
Battery Installation
Insert (1) size C/LR14 (1.5V) alkaline battery into the Vibration Unit.
Vibration Function
The vibration function can calm and soothe the baby. To use the vibration function, slide the Vibration ON/OFF switch to the ON or OFF position.
Disassembly for Storage
To disassemble the bouncer for storage, use a small Phillips screwdriver to depress the release button on the inside of each connecting hub. Remove the footrest tube and base frame tubes from each connecting hub.
Follow Us
Find us on Facebook and Instagram: @brightstarts
FAQ
How do I clean the product?
To clean the product, use a damp cloth with mild soap. Do not immerse in water or use harsh chemicals.
Can I use rechargeable batteries?
We recommend using alkaline batteries for optimal performance. Rechargeable batteries may not provide the same level of power.
Is the seat pad machine washable?
Yes, the seat pad can be removed and machine washed according to the care instructions provided.
Flamingo Vibes™
Bouncer • Asiento • Transat
Babywippe • Caderia De Assento • Sdraietta
IMPORTANT! KEEP FOR FUTURE REFERENCE
WARNING
- FALL HAZARD: Babies have suffered skull fractures falling while in and from bouncers when not used properly.
- NEVER leave the child unattended.
- Use bouncer ONLY on the floor.
- NEVER use on an elevated surface. Only use on the floor.
- NEVER lift or carry baby in bouncer. • NEVER lift bouncer using a toy bar as a handle. SUFFOCATION HAZARD: Babies have suffocated when bouncers tipped over on soft surfaces and/or when bouncers have been used as a sleep product.
- NEVER use on a bed, sofa, cushion, or other soft surface.
- Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
- TO PREVENT FALLS AND SUFFOCATION:
- ALWAYS use restraints and adjust to fit snugly.
- STOP using bouncer when baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.
- Never let the child sleep in this product.
- NEVER use as an infant carrier for automobile or airline travel.
- NEVER attach any additional strings or straps to product or toy bar.
- IMPORTANT
- Adult assembly required.
- Please read all instructions before assembly and use of the product.
- Care should be taken in unpacking and assembly.
- Examine product frequently for damaged, missing, or loose parts.
- DO NOT use if any parts are missing, damaged, or broken.
- Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
- This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.
Care and Cleaning
-
Seat pad – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
-
Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry.
Do not immerse in water. -
Frame – Wipe the metal frame with soft, clean cloth and mild soap.
Battery Information
The vibration Unit requires (1) size C/LR14 (1.5V) alkaline batteries (not included).
CAUTION: Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture.
- Always keep batteries away from children.
- Do not mix old and new batteries.
- Do not mix alkaline, standard, or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Install the batteries so that the polarity of each one matches the markings in the battery compartment.
- Do not short-circuit the batteries.
- Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
- Remove exhausted batteries from the battery compartment.
- Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
- Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
- Please use the correct disposal method for batteries.
- Remove batteries before putting the product into storage for a prolonged period of time.
- Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
- Do not dispose of product or batteries in fire, batteries may explode or leak.
This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.
Parts List and Drawing
INSTALLATION
Using the Seat Restraint
Storage and Travel
To disassemble the bouncer for storage:
Use a small Phillips screwdriver to depress the release button on the inside
of each connecting hub on the bouncer. Remove the footrest tube and base frame
tubes from each connecting hub.
Find us on Facebook and Instagram @brightstarts Retrouvez-nous sur Facebook et Instagram @brightstarts
Toys • Activity Gyms • Bouncers • Rockers • Swings Activity Centers • Walkers • Door Jumpers
MANUFACTURED FOR • FABRIQUÉ POUR ® ©2023 KIDS2, INC. www.kids2.com/help KIDS2,
INC. ATLANTA, GA USA 30305 •
1-800-230-8190
IMPORTED BY • IMPORTÉ PAR
KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894-1855
KIDS2 SHANGHAI LIMITED Room7401, Shanghai Tower, No.479 Lujiazui Ring Road ,
Pudong New Area,
Shanghai 200120 •+86 21 31025990
KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo,
Japan 150-0013 • (03) 5322-6081 KIDS2 UK LTD. 725 CAPABILITY GREEN, LUTON,
BEDFORDSHIRE, UK, LU1 3LU • +44 01582 816 080
KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS •
+31 20 2410934 KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488
MADE IN CHINA • HECHO EN CHINA • FABRIQUÉ EN CHINE • HERGESTELLT IN CHINA •
FABRICADO NA CHINA • PRODOTTO IN CINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>