AIGOSTAR B30203L8F Electric Kettle Instruction Manual

INSTRUCTION MANUAL
ELECTRIC KETTLE MODEL: B30203L8F

B30203L8F Electric Kettle

PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE OPERATING YOUR PRODUCT AND RETAIN IT FOR FUTURE USE.

IMPORTANT SAFEGUARDS

Before commissioning this kettle, please read the instruction manual carefully.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only in one way. If the plug does not fitfully into the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not attempt to modify the plug in any way.

1. Read these instructions carefully and save them for future use.
2. Place the product and the power cord out of the reach of children. Close supervision is necessary if you use your appliance when children or infirm persons are nearby.
3. Before inserting the power cord, make sure that the marked voltage (on the bottom of the kettle) matches the voltage in your home. If it doesn’t match, contact the place of purchase and do not use this electric kettle.
4. Before filling with water, or before cleaning, or when not in use, make sure to turn off the switch and unplug the power cord.
5. Do not exceed the maximum water level when filling with water, as boiling water can cause injury. The highest water level is indicated inside the kettle and only cold water should be used.
6. To avoid fire hazards, do not use the product in front of flammable or combustible materials. For example, do not place or use this product near gas stoves or electric stoves.
7. Do not hang the power cord on the edge of a table, and ensure that the power cord does not come into contact with hot surfaces.
8. Do not pull the power cord forcefully, as this can damage the cord and cause electric shock.
9. If the power cord or plug is damaged, or if any part of the product is damaged, do not attempt to repair the kettle, plug, or power cord yourself. Please take the product to the nearest authorized repair center for inspection, maintenance, or adjustment. Otherwise, do not use this product.
10. Avoid touching the hot surface of the kettle. Use the handle or grip.
11. To prevent possible steam burns, turn the spout away from the body before use.
12. If using on wooden furniture, place a protective pad to avoid damaging the surface of the furniture.
13. To avoid scalding, ensure that the lid is properly closed before use.
14. If the lid moves while boiling water, it may cause scalding.
15. When hot, handle or reposition the lid carefully, and avoid manipulating it with your hands.
16. Be extremely careful when moving the kettle after boiling water. Do not lift it by the lid and always use the handle.
17. Do not turn on the switch when the kettle is empty.
18. To prevent electric shock, do not place the kettle, base, or power cord in any liquid.
19. Only use the provided kettle base to boil water. This base should not be used for other purposes.
20. Apart from boiling water, the kettle should not be used for other purposes. Other liquids or food can contaminate the interior of the electric kettle.
21. Do not press the lid release button when water is boiling or shortly after boiling to avoid steam burns.
22. Avoid liquid spills on the buttons during operation, as water may penetrate the product and cause malfunctions.
23. Do not add water exceeding the maximum capacity, as it may damage the product and lead to abnormal operation.
24. Regularly clean the scale or residues at the bottom of the kettle, as this may affect the normal operation of the product.
25. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off,” then remove plug from wall outlet.

TECHNICAL SPECIFICATION

PRODUCT OVERVIEW

A: Safety Lock Lid
B: Lid
C: Spout
D: Kettle body
E: Switch
F: Handle
G: Indicator
H: Power base

OPERATION INSTRUSTION

1. Before first use, fill the kettle with clean water up to its maximum capacity and boil it. Then discard the water and start using the kettle.
2. Before filling or adding water, make sure the power plug is in the unplugged state.
3. Fill the kettle with water up to your desired level, but do not overfill it to avoid the risk of overflow or splashing. The water level markings on the kettle will  help you measure the required amount of water. You can pour water through0the spout or the open lid, but remember to close the lid properly after filling. Otherwise, the kettle will not automatically turn off after boiling.
4. Do not fill the kettle below the minimum water level to avoid dry boiling during use.
5. Do not exceed the maximum water level when filling the kettle.
6. For safety purposes, this product is equipped with an automatic shut-off feature for dry boiling. If the kettle reaches a dry boiling state, this feature will automatically cut off the power supply. If this happens, turn off the switch, unplug the power plug, allow the kettle to cool for 5 to 10 minutes, then refill it with water and resume normal usage.
7. Insert the plug into the power outlet, and the power will automatically be connected to the power switch. Press the switch button to position “1” , and the kettle will start working.
8. The switch will automatically turn off when the water has boiled.
9. Remember, if you do not want to boil water again, turn off the power.
10. You can manually turn off the kettle at any time by pushing the switch to position “O” .

MAINTENANCE AND DESCALING

1. Before cleaning, ensure that the power plug is removed from the socket and that the kettle has cooled down completely.
2. To prolong the service life of the electric kettle, any scaling should be removed regularly.
3. Due to different water quality levels in different countries, hard water may generate scaling under long-term heating conditions. Although this is harmless to human health, it affects the heating efficiency and the kettle’ s appearance, and therefore it is necessary to remove the scaling regularly. This can be done by mixing ordinary vinegar and water at a ratio of 1 :2, boiling the mixture and placing it in the kettle overnight. Discard the mixture the next day, then boil clean water in the kettle and discard the water again. If there is still scaling in the product, repeat the above steps. Do not clean this product with steel wool or any chemical or powder cleaner.
4. After use, empty the kettle and store it in a cool, dark place.

DISPOSAL

Disassemble and recycle the kettle in accordance with local regulations.
Correct disposal of this product
This mark indicates that this product should not be disposed of in the same way as typical household waste in Europe. To prevent possible harm to the environment and human health, we suggest that you dispose of any unwanted kettles by delivering them to an appropriate waste disposal center. Disposal should be carried out in an environmentally-friendly manner and the product should be made available to any applicable recyclable material collection service.
WARRANTY: 2YEARS

https://www.aigostar.com/ES/turnto/turnto3.aspx
AIGOSTAR INTERNATIONAL LIMITED
UNIT 4 TEES VALLEY COURT GLENARM ROAD
WYNYARD TS22 SFE GB
GB311003583
http://WWW.AIGOSTAR.COM
MADE IN CHINA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>