AIGOSTAR AI0402 LED Dimmable Bulb User Guide
- June 1, 2024
- aigostar
Table of Contents
AIGOSTAR AI0402 LED Dimmable Bulb
INSTRUCTION
Smart LED Bulbs
Thank you for buying AIGOSTAR LED Bulb.
Please read this manual carefully before operating this product.
APP instruction for use
Step 1: Application Installation
Search “AigoSmart” in APP Store or Google Play, or scan the QR code below to install.
Step 2: Register
Enter the register interface, input the email address/phone number to register
an account. Just login in if you already have an Aigo Smart account.
Step 3: Add device to AigoSmart
Note: Please turn on bluetooth and check if your home network is 2.4G and make sure your mobile phone has been connected to Wi-Fi home network before operating.(The current devices can only support 2.4G network, which cannot work with 5.0G network.)
Network configuration way1: Auto discover
-
First, power on the device, and the device defaults to the network distribution mode within 10 minutes after powering on.
-
Turn on “AigoSmart” APP, a request of network configuration will appear on the homepage or click”+” button on the top right corner.
-
Click “Add device” and add the type you needed.
-
Choose Wi-Fi and enter Wi-Fi password to joint the network, keep your router, mobile phone near to the device as possible.
-
Wait patiently till the device is connected successfully.
The device name can be changed after connected successtully. -
Above network configuration operations should be completed within 10 minutes after powering on.
Network configuration way2: Manual network configuration
-
Configure the device to network configuration status
-
Power on the device.
-
Switch the device on and off three times(on-off-on-off-on)
-
Make sure the light blinks quickly.
A request of network configuration will appear on the homepage or click”+” button on the top right corner, and select the correspond product category to add products.
Note: Make sure the indicator light blinks rapidly, if not,please cut off the power one minute, and repeat the steps of network configuration. Please complete the network configuration within 3 minutes.) -
Click “Add device” and add the type you needed.
Choose the correspond network connection mode(Please choose the bluetooth network configuration first). -
Choose Wi-Fi and enter Wi-Fi password to joint the network, keep your router, mobile phone near to the device as possible.
-
Wait patiently till the device is connected successfully.
Step 4: Device control
Name the device and click “confirm”, the device will show on the homepage of
the APP, click the device to enter the setting page.
Please scan the QR code to get more details information of operation guidance.
Note: Some devices feature different display interfaces due to different
functions.
The free application “AigoSmart” is compatible with mobile devices. The
versions of IOS13.0, Android5.0(and higher) offer a better experience.
The name you give to the device will be the name for voice control on Amazon
Alexa or Google Home later.
After entering the”more settings” page, you can enter “help center” for latest
user guides. If your problems haven’t been solved, leave a feedback, we will
wholeheartedly give you the best service.
- Operating Frequency: 2412-2472MHz
- Maximum transmitted power :20 dBm
WARNING:
PLEASE DO NOT DROP THE LAMP OR PUSH AGAINST IT.
PLEASE DO NOT DISASSEMBLE THE LAMP AND MAKE ALTERATIONS.
DO NOT USE LAMPSHADES WITHOUT VENTILATION OPENINGS.
CUT OFF THE POWER BEFORE INSTALLATION.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>