lifefactory 16oz Stainless Steel Vacuum Insulated Tumbler User Guide

16oz Stainless Steel Vacuum Insulated Tumbler
User Guide

General Care:

• Before first use, and as soon as possible after each use, wash all parts with warm, soapy water. Rinse all parts thoroughly and allow to dry.

• As soon as possible after each subsequent use, wash all parts with warm, soapy water. Rinse all parts thoroughly and allow time to dry.

• This product is top-rack dishwasher safe; however, washing by hand is recommended as the dishwasher uses harsher detergents and hot water that may affect the appearance of your product.

• Residual liquids, foods, or other contents may become trapped between product components, such as lid parts, container parts, gaskets (flexible band around lid and/or stopper), or straws (if present in the product).
  Although this product is top-rack dishwasher safe, washing by hand is recommended to ensure that all parts of the product are thoroughly cleaned.

• To help maximize thermal retention, pre-chill the product just prior to use.
  Fill with warm or ice-cold tap water, attach the cap, and let stand for 5 to 10 minutes before emptying the water. After filling the container with contents, immediately re-cover it with a cap to increase thermal efficiency. Never use a microwave,  conventional oven, or another heat source for this purpose.

• DO NOT leave contents in the container for longer than 24 hours.

• DO NOT use abrasive cleaners or scrubbers since they may dull the finish.

• DO NOT use bleach or cleaners containing chlorine on any parts of the product.

Assembly & Use

Stainless Steel Vacuum Insulated Tumbler with Rocker Lid:

1. Remove lid (A) by twisting counterclockwise.

2. Unlock the lid tray and button unit (A5) from lid rim (A1) by turning the tabs on the bottom of lid tray (A4) clockwise and lifting out.

3. Remove the lid button (A3) by pressing up from underneath to release from the lid tray (A4).
   a. Align the side bumps (A3.1) with the channel openings (A4.2) on both sides of the lid tray (A4). Make sure the cutout gap on the back side of the lid button (A3) aligns with the two side-by-side horizontal tabs (A4.1) on the inside of the lid tray (A4). In other words, the lid button (A3) and lid tray (A4) should be aligned as shown in the reference image (exploded view).
   b. Press down on lid button (A3) on the top of the lid tray (A4) until it clicks into place.

4. Remove the gasket (A2).

5. Wash all parts separately and dry completely before reassembling.
   a. Ensure gasket (A2) is properly seated to minimize leaking.

6. To re-assemble lid (A), align the two side circle tabs (A4.3) on the lid tray (A4) with the open slots (A1.1) on the inside bottom of the lid rim (A1).
   a. To lock, turn tabs on the bottom of the lid tray (A4) counterclockwise.

7. Fill container (B) with contents. Do not overfill: Leave space for the lid (A) to avoid overflow.

8. Replace the lid (A) by twisting it clockwise.

9. To drink, push down where the logo is located on the lid button (A3) to reveal the drink opening.

10. When finished drinking, push down on the side opposite of the logo located on the lid button (A3) to conceal the drink opening.

Warnings

• NOT RECOMMENDED FOR USE BY CHILDREN: Keep out of the reach of children, especially when product
  contains hot contents, which may burn or scald the user.

• Always test the temperature of the contents before consuming. Hot liquids may burn or scald the user.

• DO NOT use the product in the microwave, on the stove top, or in any type of oven.

• DO NOT overfill the container: Leave space at top of the container for the lid to avoid overflow.

• DO NOT use tools or devices to force the container to open. If you are unable to open the container by hand, do not open it and dispose of it at your local waste facility.

• DO NOT use to store or carry carbonated drinks or dry ice. This may cause the lid/stopper and contents to eject forcefully or leak.

• Check periodically to make sure any gasket (flexible band around lid and/or stopper) is present and properly positioned to prevent contents from passing through the stopper when the stopper is closed (if applicable to the product).
  Missing, worn or misaligned gaskets may cause the product to leak.

• In general, contents should not be left in a container for longer than 24 hours. However, the rate at which contents spoil depends on several factors. Certain contents that include, for example, dairy and/or tomato may start to spoil sooner.
  Proceed with caution when using the product with quick spoiling contents.

• If contents are left in the container longer than 24 hours, or you suspect spoilage, use caution when opening the container.
  Contents spoilage can cause pressure inside the container to build, possibly leading to the forceful ejection of the stopper or contents. In such circumstances, before attempting to open the container, ENSURE THE OPENING IS POINTED AWAY FROM THE USER OR OTHER PERSONS TO AVOID INJURY.

Limited Warranty

Thermos L.L.C. warrants this product to be free from defects in material or workmanship for one year from date of
purchase. This warranty does not cover ordinary wear and tear or color fading, or any condition affected by abuse, neglect, alteration, accident or improper use or maintenance.
We will, at our option, repair or replace any product component part that fails to conform to this warranty within 30 days after its receipt by our factory service department. IN  NO EVENT WILL THERMOS BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, OR SPECIAL DAMAGES.
Some jurisdictions do not allow the exclusion of incidental, consequential, or special damages, so the preceding exclusion may not apply to you.
This is a factory guarantee.
Please do not return this product to the retailer.
Send defective unit or component along with a written explanation of the defect directly to:
Thermos L.L.C. – Warranty Service
355 Thermos Road
Batesville, MS 38606, USA
1-800-831-9242
www.lifefactory.com

This warranty gives you specific legal rights and you may also have other rights, which vary from state to state or province to province.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REPRESENTATIONS, OR CONDITIONS OF QUALITY AND  PERFORMANCE, WHETHER WRITTEN, ORAL, OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A  PARTICULAR PURPOSE. SUCH IMPLIED WARRANTIES, REPRESENTATIONS, AND CONDITIONS ARE HEREBY DISCLAIMED.
THE REMEDIES STATED  HEREIN CONSTITUTE THE PURCHASER’S EXCLUSIVE REMEDIES AND THERMOS’S ENTIRE LIABILITY FOR ANY BREACH OF WARRANTY.
© 2021 Thermos L.L.C. All rights reserved.
lifefactory is a registered trademark of Thermos L.L.C. in the U.S. and other countries.

Thermos L.L.C.
475 N. Martingale Road, Suite 1100
Schaumburg, IL 60173
1-800-243-0745
www.lifefactory.com

References

• Lifefactory

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>