Untrammelife UNYH-WS-01 Gold Wall Sconce Light Modern Farmhouse Bathroom Wall Light Fixture Instruction Manual

June 1, 2024
Untrammelife

INSTALLATION INSTRUCTIONS
Model#UNYH-WS-01
READANDSAVETHESEINSTRUCTIONS

 UNYH-WS-01 Gold Wall Sconce Light Modern Farmhouse Bathroom Wall Light

Fixture

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

PREPARING FOR INSTALLATION (Fig. 1)
Untrammelife UNYH-WS-01 Gold Wall Sconce Light Modern Farmhouse Bathroom
Wall Light Fixture - fig 1

  1. Shut off power at the fuse box or circuit breaker box and temove the old fixture induding the mounting hardware.

  2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation.

  3. Attach the mounting plate (D) to the junction box (A) using screws (E). The side of the mounting plate marked “GND” must face out.
    The junction box is not included.
    CONNECTING THE WIRES (Fig.2)
    Untrammelife UNYH-WS-01 Gold Wall Sconce Light Modern Farmhouse Bathroom
Wall Light Fixture - fig 2

  4. Take the black wire from the wall junction box (A) and the smooth wire leg from the fixture and twist bare ends together. Twist wire connector onto end of wire until snug.

  5. Repeat same process with white junction box wire and ribbed wire leg of fixture wire. NOTE: Twist wires together in the same direction you twist the wire connector onto wires.

  6. If your junction box (A) has a grounding wire (green or bare copper), attach this wire and the bare copper wire from the fixture together as step 1. If junction box (A) has no ground  wire, attach the bare copper fixture wire to the green groundscrew on the crossbar.

  7. Tuck these wire connections neatly into the wall junction box (A). Then turn the fixture body (H) through the screw (C) and tighten clockwise with the finial (1).

  8. Install bulbs (G) to the socket of fixture body (H). (Please do not exceed the Maximum capacity recommended on the socket.)

  9. Install the glass cover (F) and (J) in the hole position and hold. clockwise on the fixture body (H).

Your installation is now completed. Return power to the junction box and test the fixture.
IMPORTANT:
FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING AND INSTALLATION.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals