Sunnydaze DECOR NPH-519 Clover Steel Garden Bed Instructions

Table of Contents

Sunnydaze-DECOR-NPH-519-Clover-Steel-Garden-Bed-
PRODUCT

Specifications

Assembly

Review all care and assembly information in the manual.
Assemble components on a soft, clean surface to prevent damage to the finish.
Inspect packaging to ensure all parts are present before disposing of packing materials.
Follow the assembly steps provided in the manual carefully.
Use gloves during assembly due to sharp edges.

Use & Care

Discoloration and minor surface rust may occur, which is normal and should not affect product integrity.
Avoid modifications to the product to maintain the warranty.
If there are issues with assembly or damages, contact customer service with item number and order information.
Manufacturer and seller disclaim liability for personal injury or property damage due to improper use or neglect of the product.

FAQ

Q: What should I do if I encounter missing parts during assembly?

A: Before disposing of packing materials, ensure all parts are present. If any parts are missing, contact customer service for assistance.

Q: Can I customize the dimensions of the raised garden bed?

A: Yes, the dimensions of the garden bed are customizable based on the assembly of the components provided.

4-LEAF CLOVER-SHAPED GALVANIZED STEEL RAISED GARDEN BED

Review all care and assembly information carefully before using this product. Save this manual for future reference.
Assemble components on a soft, clean surface to avoid damaging the finish.
Inspect packaging to ensure all parts are accounted for before disposing of packing materials.
Save the packing slip.

CAUTION SHARP EDGES USE EXTREME CAUTION
WEAR GLOVES DURING ASSEMBLY
WARNING CHOKING HAZARD — This item contains small parts that can be swallowed.
Keep children and pets away during assembly.

HELPFUL HINTS

Do not tighten any bolts until the entire unit is loosely assembled. If hardware is tightened too soon, mounting holes may not align and parts may not easily fit together.
Ensure panels are installed with the rolled edges facing the inside of the bed.
Review all steps and understand assembly before beginning.
CAUTION: Sharp edges. Wear gloves during assembly.

STEP 1
- A: 8
- C: 20
- D: 20
- Align two Side Panels (A).
- Insert Bolt (C) through the outside edges of the panels and loosely secure by hand-tightening Wing Nuts (D).
- Repeat to connect three more sets of side panels.
STEP 2
- B: 4
- C: 20
- D: 20
- Align one Corner (B) with the left side of one of the assembled panel sets.
- Insert Bolt (C) through the outside edges of the panels and loosely secure by hand-tightening Wing Nuts (D).
- Repeat to connect the three remaining corners to the side panel sets.
STEP 3
- C: 20
- D: 20
- Align the four sets of panels and loosely fasten each section using the remaining Bolts (C) and Wing Nuts (D), as shown.
- After all sections have been loosely fastened, finish tightening all sixty sets of hardware.

This garden bed provides ergonomic access to plants and can eliminate the need to till the soil each year as long as the soil is not packed down. Avoid stepping inside the bed!
Prepare the site before installation. Level the ground and remove existing vegetation. Landscaping fabric can be used under the beds; a double layer is recommended for beds placed directly on a lawn.
A layer of gravel or stone can be used at the bottom for improved drainage.
Loosely hand-tighten all nuts and bolt sets first, position the bed, then tighten. After assembly, check that all fastening points are fully secured.
Galvanized metal beds do not require maintenance and are built to withstand years of exposure to outdoor elements.
The galvanized finish protects the steel from corrosion. Over time, galvanized steel will fade, and some discoloration is normal. Minor surface rust on edges and hardware is to be expected and should not affect the structural integrity of the product.

SAFETY STATEMENTS & WARNINGS

Wear gloves during assembly to prevent personal injury.
Do not stand on, or lean objects against the bed wall. Doing so may damage the product.
Do not let children play in or around the garden bed.
Using this item for applications other than gardening will void the product warranty.
Any modification to the product or failure to follow recommended care will void the product warranty.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of.
Please have the item number and order information ready to expedite response time.

WARNING:

Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.
Purchase Date:—————————————————
Order/Customer Reference Number:————————-
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period.
Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email: customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

| Sunnydaze DECOR NPH-519 Clover Steel Garden Bed [pdf] Instructions
NPH-519 Clover Steel Garden Bed, NPH-519, Clover Steel Garden Bed, Steel Garden Bed, Garden Bed, Bed
---|---