EMTOP EVCR1401 Vacuum Cleaner 1400W Power Instruction Manual

: June 2, 2024
: EMTOP

Table of Contents

EMTOP EVCR1401 Vacuum Cleaner 1400W Power
Product Information
Product Usage Instructions
Product Maintenance
Troubleshooting
FAQs
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EMTOP EVCR1401 Vacuum Cleaner 1400W Power

EMTOP-EVCR1401-Vacuum-Cleaner-1400W-Power-image

Product Information

Specifications

Model: EVCR1401
Power: 1400W
Voltage: 220V-240V~50/60Hz
Air Flow: 1.8-1.9 m3/min
Vacuum Pressure: 16-18kPa
Dust Capacity: 30L

Product Usage Instructions

Unpack the vacuum cleaner and ensure all components are included.
Install the 4 small wheels on the base of the vacuum cleaner.
Connect the power cord to a suitable power outlet (220V-240V).
Attach the hose connector to activate the suction function.
Turn on the vacuum cleaner using the power switch.
Move the vacuum cleaner around to clean the desired area.
Empty the dust container when full and clean or replace filters as needed.

Product Maintenance

It is important to regularly maintain your vacuum cleaner to ensure optimal performance:

Clean or replace filters when visibly covered with dust.
Empty the dust container after each use to prevent clogging.
Check and clean the brush roll regularly for efficient cleaning.
Store the vacuum cleaner in a dry place when not in use.

Troubleshooting

Issue: Low suction power

Solution: Check for clogs in the hose or filters, clean or replace filters if necessary, and ensure proper assembly of all components.

Additional Safety Warning To reduce the risk of fire, electric shock, or injury:

Do not use outdoors.
Do not leave the vacuum cleaner plugged in. Turn off the switch and unplug the cord when not in use and before servicing.
Do not use as a toy. Special attention is required when used near children.

FAQs

Q: How often should I clean the filters?

 **A:** It is recommended to clean or replace the filters when they are visibly covered with dust for optimal performance.

Q: Can I use this vacuum cleaner on wet surfaces?

 **A:** No, this vacuum cleaner is designed for dry use only. Do not use it on wet surfaces to avoid damage.

Q: What should I do if the vacuum cleaner overheats?

 **A:** If the vacuum cleaner overheats, turn it off, unplug it, and allow it to cool down before using it again. Check for blockages that may be causing overheating.