EMTOP ELGS208501 Electric Cordless Lithiumion Jigsaw Instruction Manual
- June 2, 2024
- EMTOP
Table of Contents
EMTOP ELGS208501 Electric Cordless Lithiumion Jigsaw
Product Information
Specifications:
- Model: ELGS208501
- Stroke Length: 20mm – 80mm
- Mild Steel Cutting Capacity: 8mm at 0-2400/min
- Nominal Voltage: 20V DC
- Standard Battery Cartridge: EBPK20011, EBPK2002
Model| Stroke Length| Max. Cutting Capacity| Strokes Per Minute| Rated
Voltage| Standard Battery Cartridge
---|---|---|---|---|---
ELGS208501| 20mm| Wood: 80mm, Mild Steel: 8mm| 0-2400/min| 20 V DC| EBPK20011,
EBPK2002
Product Usage Instructions
Installation or Removal of Battery Cartridge:
- Ensure the tool is powered off.
- Locate the battery cartridge and press the release button to remove or insert it into the tool.
- Make sure the battery cartridge is securely in place before operating the tool.
Changing Cutting Action:
The tool offers different cutting actions for various applications. Use the action change lever to select between straight line cutting, small orbit cutting action, and medium orbit cutting action.
Installing or Removing Saw Blade:
- Ensure the tool is unplugged and the battery is removed.
- Use the blade clamp to secure or release the saw blade.
- Always follow safety precautions when handling sharp blades.
Cutting Instructions:
Adjust the cutting action according to the material being cut.
The tool is suitable for cutting mild steel, aluminum, and hardwood. Always
wear appropriate safety gear such as goggles and gloves when operating the
saw.
General Safety Warnings for Electrical Tools
Failure to follow these safety warnings may result in electric shock, fire, or serious injury. Save these instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
- Work Area Safety
- Keep the work area clean and well-lit.
- Do not operate power tools in explosive atmospheres.
- Keep children and bystanders away while operating a power tool.
- Electrical Safety
- Power tool plugs must match the outlet.
- Avoid body contact with earthed or grounded surfaces.
- Do not expose power tools to rain or wet conditions.
- Do not abuse the cord.
- When operating a power tool outdoors, use an extension cord suitable for outdoor use.
- Personal Safety
- Stay alert, watch what you are doing, and use common sense when operating a power tool.
- Use personal protective equipment.
- Prevent unintentional starting.
- Remove any adjusting key or wrench before turning the power tool on.
- Do not overreach. Keep proper footing and balance at all times.
- Dress properly.
- Do not use the power tool if the switch does not turn it on and off.
FAQs
Where can I find the instruction manual for my EMTOP tool?
The manual can be read before using the tool and is available on their website www.emtop.com.
What should I do with used batteries?
Always recycle batteries, ensuring they are not disposed of with household waste.
Can I use any accessories with my EMTOP tool?
No, you should only use accessories recommended by the manufacturer.
What kind of protective equipment should I wear when using the EMTOP tool?
You should wear safety glasses, additional protection, and a dust mask.
How should the battery be charged?
Charge the battery only at temperatures below 40°C and use the charger specified by the manufacturer.
Exploded View and Parts List
The exploded view of the model ELGS208501 is provided, showing all parts and their placement within the tool. A corresponding parts list with item numbers, descriptions, and quantities is included. For detailed information on each part and its location within the tool, refer to the diagrams and the parts list on the EMTOP website.
Manufactured by MEILLEURS OUTILS CO., PTE.LTD. in Taicang Economic and Technological Development Zone, Taicang City, 215400, China.
For more information and resources on EMTOP tools, please visit EMTOP Tools Home.
“`
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>