CABLETECH UCH0201 Full Motion TV Wall Mount User Manual

Table of Contents

Specifications

Step 1: Unboxing

Step 2: Assembly

Step 3: Mounting TV

Locate the ideal spot on the wall for mounting your TV. Use a stud finder to locate studs for secure installation.

Step 4: Attaching TV

Securely attach the TV to the wall mount according to the instructions provided. Ensure it is safely mounted.

Step 5: Adjusting Position

Utilize the full-motion feature to adjust the position of the TV for optimal viewing angles.

Frequently Asked Questions (FAQ):

Q: How much weight can this wall mount support?

A: The UCH0201 FULL-MOTION TV WALL MOUNT can support TVs up to 43 inches and a maximum weight of 66 lbs.

Q: Can I install this wall mount on any type of wall?

A: It is recommended to install the wall mount on solid walls or directly into wall studs for stability and safety.

Read the entire instruction manual before you start installation and assembly.
If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
Mounts must be attached as specified in assembly instructions. Improper installation may result in damage or serious personal injury.
Safety gear and proper tools must be used. This product should only be installed by professionals.
This product is designed to be installed only on solid concrete walls or brick walls.
Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Use the mounting screws provided and DO NOT OVER-TIGHTEN mounting screws
This product contains small items that could be a choking hazard if swallowed.
Keep these items away from children.
This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist before installation.
If any parts are missing or faulty, telephone your local distributor for a replacement.
MAINTENANCE: Check that the bracket is secure and safe to use at regular intervals (at least every three months).

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS LESZEK Sp.k., ul. Garwolinska 1, 08-400 Mietne.