CABLETECH URZ0336A DVB-T2 HD Tuner for Ground-Based Television Owner’s Manual

CABLETECH URZ0336A DVB-T2 HD Tuner for Ground-Based Television

SAFETY INSTRUCTIONS

Read the instruction manual carefully before first use and keep it for future reference. Producer is not responsible for damages caused by inappropriate handling and use of the device.

The lightning flash with arrowhead symbol, whithin an equilateral triangle is indicated to alert the user the presence of uninsulated, dangerous voltage, within the product enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.

•  Before connecting the device to power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.
• Make sure to place this device on flat, dry and stable surface.
• Protect this device from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
• Product suitable for indoor use only.
•  Disconnect the device from the power supply if it is not going to be used for a long time.
• Protect power cord from harp edges and other factors which could lead to its damage.
•  When you disconnect the power cord of the device, grasp and pull the plug, not the cord/cable.
• Place the device in a properly ventilated place.
• Do not block or cover slots, holes or openings on the product by placing on soft furnishings such as carpets, rugs or beds as these are provided for functionality and/or ventilation to ensure safe operation of the product.
• Do not place heavy objects on the device.
• Do not use this device if it has been damaged or its operation is abnormal.
• Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for check-up/repair.
• This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner, and all the safety precautions are understood and followed. Children should not play with this device. Children should not perform cleaning and servicing of the device unsupervised.
• Fixed power cable may only be replaced in an authorized service point.
• ALWAYS disconnect this device from power supply mains before cleaning.
• Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

PRODUCT DESCRIPTION

Front panel

Back panel

1. Antenna input
2.  Loop output
3. Coaxial output
4.  HDMI output
5.  LAN port
6. SCART output
7.  Power cord

REMOTE CONTROL

1. Power button
2.  SUB-T button: Subtitle options
3. LANG button: Select audio language or audio mode
4.  MUTE button: Mute/unmute
5.  EPG button: Display Electronic Program Guide
6.  GOTO button: Go to a specific time in the movie
7.  PAGE + button: Go to next menu
8.  TTX button: Display teletext
9.  REPEAT button: Turn on/off repeat function
10.  PAGE – button: Go to previous menu
11.  MENU button: Display main menu screen
12.  EXIT button: Return to the previous menu or exit the menu
13.  OK button: Confirm your choice
14.  VOL – / VOL + : Decrease/increase volume
15.  CH – / CH + : Previous/ next channel
16.  FAV button: Display favorite program list
17. TV/RADIO button: Select TV or Radio mode
18.  Number key
19. RECALL button: Return to the last selected channel
20. INFO button: Display information about current channel
21. button: Fast backward
22. button: Fast forward 23. button: Previous
23.  button: Next
24.  Play
25. Pause
26.  Stop
27.  Record
28.  PVR button: Enter PVR menu
29.  V-FORMAT button: Select screen resolution
30.  ASPECT button: Switch the aspect ratio
31. TIMER button
32.  Switch button

INSTALLATION OF BATTERIES

1.  Open the battery compartment.
2. Insert 2x AAA batteries with correct polarization (+/-).
3. Close the battery compartment.

Note:

• Do not mix the batteries.
• Remove the batteries if the remote control is not going to be used for an extended period of time.
•  Do not place the remote control under the direct sunlight or near sources of excessive heat.
•  Point the remote control to the unit no more than 8 meters from the remote control sensor and within 30° horizontally and 30° vertically of the front of the unit.

OPERATION

1. Press the MENU button to enter main menu screen.
2.  Use navigation buttons to navigate the menu and adjust the settings.
3.  Press the MENU button to return to the previous menu or press the EXIT button to quit the menu screen.

MAIN MENU

PROGRAM

Program Edit: Input the password (000000 or 888888) to enter the editing menu. This menu enables you to edit channel lists by locking, deleting, skipping, moving channels and creating favorite channels list.

• Move: Select a channel and press the red button on the remote control, the channel will be marked with an icon. Use the up and down buttons on the remote control to select new position for this channel and press the OK button; the channel will be moved to the selected position.
  Note! When LCN is on, channel will be moved together with its logical number.

• Skip: Select a channel and press the green button on the remote control; the channel will be marked with an icon. The selected program will be skipped when you switch channels. To cancel press the green button again.

•  Lock: Select a channel and press the yellow button on the remote control; input password and confirm with the OK button. The channel will be marked with an icon. The selected channel will be locked for choosing. Access to locked channel is available after entering a password (000000 or 888888). To cancel press the yellow button again.

• Delete: Select a channel and press the blue button on the remote control; a warning message will appear. Press the OK button to delete the channel.

• Favorite: Select a channel and press the FAV button on the remote control. Select a category for the channel (Movie, News, Sport or Music) and press the OK button to confirm. Press the EXIT button to return to the channel list. A star appeared next to the selected channel and it is now marked as favorite channel and automatically added to the favorite list (a list is available after pressing the FAV button on the remote control in normal viewing mode). To delete the channel from favorite list, select it by pressing the OK button, then select [Disable].

EPG: Press the EPG button to display the menu of the electronic TV guide (Electronic Program Guide), which displays the schedule of programs for a certain period of time for each available channel. Use the buttons on the remote control to select desired channel. Use the buttons to select the desired program. Press the OK button to add it to the schedule list and set timer.
Sort:

• By LCN: Sort the channels according to their logical channel number
• By Service Name: Sort the channels according to their name
•  By Service ID: Sort the channels according to the ID
• By ONID: Sort the channels according to the ONID

LCN: Turn on/off the function.

PICTURE

Aspect Ratio: Select the desired aspect ratio (4:3 LB/ 4:3 PS/ 4:3 Full/ 16:9 Wide screen/ Auto/ 16:9 Pillar Box/ 16:9 Pan&Scan).
Resolution: Select the desired resolution (480i, 480p, 576i, 576p, 720p, 1080i, 1080p (50 Hz)). TV Format: Select color system (PAL/ NTSC).
Video Output: Select component (RGB) or composite (CVBS) video output mode.

CHANNEL SEARCH

Auto Search: Select this function to start automatic searching and saving available TV channels. Note: All previously saved channels and settings will be deleted.
Manual Search: This function enables manual searching for TV channels without deleting previously saved channels and settings. Press navigation buttons to select the desired channel frequency. Press OK button to start searching for the channel. When the channel is found it will be added to the channel list. If channels cannot be found during searching, the device will exit automatically.

Country: Select your country.
Antenna Power: Set this function at On position in case of active antenna; set this function at Off position in case of passive antenna.

TIME

Time Offset: Set the GMT time zones automatically or manually.
Country Region: Select your country if [Time Offset] is set to [Auto].
Time Zone: Select your region time zone if [Time Offset] is set to [Manual].
Sleep: Select time period after which the unit will automatically switch to standby mode. Power On/Off:

•  Power On: Switch on/off automatic power on at a preset time
•  Power On Time: Set the time of automatic power on
• Power Off: Switch on/off automatic power off at a preset time
• Power Off Time: Set the time of automatic power off

OPTION

OSD Language: Select the on-screen menu language.
Subtitle Language: Select the subtitle language.
Audio Language : Select the audio language.
Digital Audio : Select the digital output type (Off/ PCM/ RAW HDMI On/ RAW HDMI OFF).

SYSTEM

Parental Guidance: Lock viewing the selected channel. To enter this function, input password 000000, 888888 or your own. Afterwards set the age rating and confirm by pressing the OK button. When the age rating of a program is equal to or higher then the preset age, the program will be locked. It would be required to enter a password to unlock the program and watch it. To disable parental guidance function, set [Age rating] to [Off].
Set Password: To set new password, first enter the old one, then enter a new one twice and confirm with OK button.
Restore Factory Default: Reset all settings to factory settings. Access to the menu is protected by the default password which is 000000 or 888888.
Information: Display information about the model and software version.
Software Update:

• OAD: It is not suggested to update the software by OAD as software is not being broadcast through DVB-T transmitters. Update the software by the USB only.

• USB Upgrade: Update software by USB (only when USB drive with upgrade file is connected).
  • Do not turn off the device or unplug the flash drive when the update has not finished, as this may damage the device!
  • Do not use software which has been modified or is dedicated to other models, as this may damage the device.

• Network Setting: Set link type and IP setting.

USB

Multimedia: Select this function if USB flash drive is connected to the device. Press OK button to display the menu in which the user can choose the type of file to play (Music/Photo/Movie/PVR).
Photo Configure:

• Slide Time: Adjust slideshow interval
• Slide Mode: Select a slideshow effect
• Aspect Ratio: Select [Keep] to show photos in the original format or [Discard] to show in the full screen

Movie Configure:

• Subtitle Specific: Set the subtitle font size
•  Subtitle BG: Set the subtitle color background
•  Subtitle Font Color: Set the subtitle font color

Network Apps: The device supports the following apps: Weather, RSS, IPTV and YouTube.

USB RECORDING

Note: This function is available only when a USB storage device is connected to the receiver.

1. Instant recording

To start recording a TV program which is currently being broadcast, go to the desired channel and press the button (a dot in the left upper corner of the screen flashes). Press the button to stop recording.

2. Schedule a recording (EPG)

• Press the EPG button to open full listings.
•  Select the TV channel using direction buttons.
• Select the TV program you want to record.
•  Press the OK button to confirm. A window will appear. There is no need to set options such as channel, start or end time as they were uploaded from the EPG. To schedule a recording, select [RECORD] in [Mode] option.

3. Timer

• Press the TIMER button on the remote control.
• Press the red button on the remote control to add a new event.
• Set all the options and confirm by pressing the OK button.

TIMESHIFT

This function ensures a continuous background recording of the selected channel. Make sure the flash drive is connected to the USB port of the device!

• Time shift is activated by pressing the time shift size in PVR Configure menu. Time shift will be activated (status bar with cutdown will be displayed at the bottom of the screen).
• Use the REV/FWD/Play/Pause buttons on the remote control to control the playback of the recorded video.
• To remove the status bar from the screen without disabling Time shift, press the EXIT button on the remote control. To turn off the Tim eshift, press the button on the remote control.

TROUBLESHOOTING

of power adapter
No signal| Antenna is disconnected| Check antenna connection
Antenna is damaged/ improperly set
No signal is transmitted
No image or sound| Improper mode has been selected on the TV| Choose proper mode on the TV
Information that the channel is coded / unavailable| Coded / unavailable channel| Choose another channel
Remote control does not work| The device is turned off| Turn on the device
The remote control is not pointed at the device| Point the remote control at the device no more than

8 meters from the remote control sensor and within 30° horizontally and 30° vertically of the front of the unit

There are obstacles between the remote control and the device| Make sure there are no obstacles between the remote control and the device
The batteries are discharged| Replace the batteries with the new ones
Forgotten channel password| –| Delete locked channel and scan channels again
When the device is moved to another room, there is no signal| Antenna connection in new place may be different (lower signal strength

resulting in weaker channel reception or no signal)

| Check antenna connection or connect amplifier to the antenna
OAD is on- searching for

software

|

–

| Disconnect the antenna, wait until searching is finished, enter menu, go to [System], [Software update] and turn off OAD

SPECIFICATION

• CPU: MSD7T10

• Internal memory: 32 Mb

• RAM: 512 Mb

• Antenna connector: IEC-Female

• Loop output: IEC-Male

• Input frequency range:
  (VHF) 170~230 MHz
  (UHF) 470~862 MHz

• Demodulation: QPSK, 16QAM, 64QAM, 256QAM

• Bandwidth: 7 MHz, 8 MHz

• Decoding: MPEG-1, MPEG-2, MPEG-4, H.264, H.265, AAC, HE-AAC, AC-3, DD+ I/O:

  • USB 2.0
  • HDMI
  • SCART
  • COAXIAL
  • RJ45
  • 2 x IEC connector (ANT IN and Loop)

Aspect ratio: Auto, 16:9 WS,16:9 PB, 16:9 PS; 4:3 LB, 4:3 PS, 4:3 Full
Display resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Supported formats: MP3, WMA, BMP, JPEG, AVI
Video resolution: 1920×1080
Audio decoding: MPEG-1 layerI/II, Dolby downmix 2 channel (License), AAC LC,HE-AAC v1/V2 , PCM downmix, IEC958 SPDIF
File system: FAT32, NTFS
Fully compliant with DVB-T2/DVB-T
Automatic/manual scan
USB 2.0 port for software update/PVR/media playback
LED display
Battery: 2x AAA batteries
Power consumption: Max. 6 W
Power consumption in standby mode: Max. 1 W
Power supply: 110-240 VAC; 50/60 Hz
Supported functions: 7 days EPG, timeshift, multilanguage menu, PVR schedule recording, signal strength display, LCN, TV channels preview, parental control, timer, teletext, favorite channel list
Supported apps: Weather, IPTV, YouTube, RSS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>