CABLETECH UCH0022 TV Tabletop Stand User Manual

June 13, 2024
CABLETECH

CABLETECH-logo

CABLETECH UCH0022 TV Tabletop Stand

CABLETECH-UCH0022-TV-Tabletop-Stand-product-image

Product Information

  • Height: minimum 100 mm / maximum 400 mm
  • Width: minimum 200 mm / maximum 800 mm –
  • Color: Black
  • Set includes: Mounting screws

Usage Instructions

  1. Ensure that the TV tabletop stand is compatible with your TV. The stand is suitable for flat TVs with a width ranging from 200 mm to 800 mm.
  2. Determine the desired height and width for your TV setup. The stand can be adjusted to a minimum height of 100 mm and a maximum height of 400 mm, as well as a minimum width of 200 mm and a maximum width of 800 mm.
  3. Place the TV tabletop stand on a stable and level surface.
  4. Choose the appropriate screws for your TV type
  5. For flat TVs, use the short screws.
  6. For curved or recessed TVs, use the long screws.
  7. Attach the screws to the mounting holes on the back of your TV, ensuring a secure fit.
  8. Carefully place the TV onto the TV tabletop stand, aligning the mounting holes on the TV with the corresponding holes on the stand.
  9. Make any necessary adjustments to ensure that the TV is securely mounted on the stand.
  10. Connect any necessary cables or accessories to your TV.
  11. Ensure that the TV is stable and balanced on the tabletop stand before turning it on or using it.
  12. Enjoy your TV viewing experience with the convenience of the TV tabletop stand.
    Note: For correct disposal of this product, please follow the waste electrical and electronic equipment disposal guidelines in your country. For any further assistance or inquiries, please refer to the user manual or contact Lechpol Electronics customer support.

Tools

CABLETECH-UCH0022-TV-Tabletop-Stand-1

Assembly

CABLETECH-UCH0022-TV-Tabletop-Stand-2

CABLETECH-UCH0022-TV-Tabletop-Stand-3

CABLETECH-UCH0022-TV-Tabletop-Stand-4

CABLETECH-UCH0022-TV-Tabletop-Stand-5

SAFETY INSTRUCTIONS

Read the entire instruction manual before you start installation and assembly and keep it for future reference.

CAUTION: Never exceed the maximum load capacity! Using with products heavier than the rated weights indicated may cause damage/injury

  • Mounts must be attached as specified in this manual. Improper installation may result in damage or serious personal injury. Producer does not claim liability for any damages / injuries caused by inappropriate installation. Use only for the purpose intended.
  • Do not alter the structure of the product. Any modifications implemented by user in the product pose risk of injury or damage and void warranty!
  • Safety gear and proper tools must be used. This product should be installed by qualified professional with proper mechanical skills and acknowledged with the building’s structure and this instruction manual.
  • When installing the device on the bracket, it is recommended to use the help of a second person.
  • Use the mounting screws provided. DO NOT OVER TIGHTEN mounting screws, as this may lead to damaging the screw thread.
  • Before installation, make sure the device, that will be installed on the bracket, is suitable for hanging on a mount.
  • All cables of the device should be routed so that they are secured from being pinched or squeezed by the mount.
  • This product contains small items that could be a choking hazard if swallowed – keep away from children, this product is not a toy.
  • For indoor use only.
  • Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your distributor for a replacement.

MAINTENANCE: After installation, make sure the bracket is firmly mounted. At regular intervals, at least every three months, check that the bracket is secure and safe to use.

SPECIFICATION

  • Dedicated to: LCD TV sets
  • Mounting: Freestanding
  • Mount type: Stand
  • Screen size: 27″ – 60″
  • Max. load: 40 kg (88 lbs)

VESA standard:

  • height min. 100 mm / max. 400 mm
  • width min. 200 mm / max. 800 mm
  • Color: Black
  • Set includes: Mounting screws

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CABLETECH User Manuals

Related Manuals