CABLETECH URZ0339 TV Set Owner’s Manual
- June 10, 2024
- CABLETECH
Table of Contents
CABLETECH URZ0339 TV Set
Product Information for TV Set URZ0339
The TV Set URZ0339 comes with a user manual in multiple languages: German, English, Polish, and Romanian. The product has various safety instructions that should be followed to prevent electric shock or damage to the device. It has sockets for AV input, DVB-T2/C antenna input, USB port, HDMI input, headphone jack output, and COAXIAL input. The TV set also has a remote control that can be used to operate the device.
Product Usage Instructions for TV Set URZ0339
Important Safety Information:
- Do not remove the cover or back of the device as there are no user-serviceable parts inside. Refer to qualified personnel for servicing.
- Make sure that the voltage of the device matches the voltage in the outlet.
- Do not connect the device to a power strip with too many other electronic components.
- When unplugging the device, hold the main plug, not the wire.
- Remove the batteries from the remote if it is not going to be used in a long time.
- Do not mix old and new batteries or mix batteries of different types.
Installation:
- To mount the stand, place the TV with the front panel facing downwards on a soft cloth or pad. Insert the stand into the holes located on the bottom of the TV (L for left, R for right).
- Insert screws into the sockets and tighten them.
Buttons on the TV:
- INPUT: open input menu
- MENU: open main menu
- CH+: switch to the next channel
- CH-: switch to the previous channel
- VOL+: increase volume level
- VOL-: decrease volume level
- POWER: turn on or off the TV
Installing Batteries:
- Open the battery compartment by sliding it to the side.
- Insert new batteries according to the polarity.
- Close the battery compartment.
Remote Control:
- Power: turn on or off the TV
- Mute: mute the sound
- Number keys: enter channel numbers or other numeric values
- TV/RADIO: switch between television and radio
- Previous channel: switch to the previous channel
- Vol-/+ : adjust volume level
- Picture settings: adjust picture quality
- Sound settings: adjust sound quality
- CH: switch to the next channel
- Source: open input source menu
- Disp: show information about the picture and sound
- TXT: open teletext
- Menu: open main menu
- Exit: exit the menu
- Arrow buttons: move within menus
- OK: confirm entries
- Mix: channel list
- Cancel: cancel a menu
- Color buttons: additional functions
- Playback controls: control playback of recorded programs
- SIZE: adjust the picture size
- Record: record the program
IMPORTANT SAFETY INFORMATION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates the presence of non-insulated, dangerous voltage.
This symbol indicates important operating and maintenance.
This symbol indicates that this equipment is a Class II or double insulated
electrical appliance. It has been designed in such a way that it does not
require a safety connection to electrical earth.
- Read this manual carefully and keep it for future reference.
- Pay special attention to warnings marked with symbols presented above and make sure to follow information presented next to them.
- Do not use this device near water or other sources of moisture.
- Do not block any ventilation openings. Install this device according to this manual.
- Do not install this device near heat sources such as radiators, stoves or other appliances that produce heat.
- If the provided plug does not fit into your outlet, do not try to force it and consult an electrician for further advice.
- Protect the power cord from being walked on or pinched, especially near plugs.
- Only use attachments and accessories provided/specified by the manufacturer.
- Unplug this device from outlet during storms, or when the device is not going to be used in a long time.
- Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, for example if the power cord or plug is damages, liquid has been spilled or objects has been dropped on the device.
- Keep the device in a well ventilated area.
- Do not expose the batteries to excessive heat.
- Make sure that the voltage of the device and voltage in the outlet matches.
- Do not connect the device to a power strip with too many other electronic components.
- When unplugging the device, hold the main plug, not the wire.
- Remove the batteries from the remote if it not going to be used in a long time.
- Do not mix old and new batteries. Do not mix batteries of a different kind. Use consumer grade, non-rechargable alkaline batteries.
- Place the TV on flat and stable surface.
- Always connect the device to a power outlet with protective ground connection.
- To provide maximum stability, use the stands that are included in the box.
- Always place the device on stable surfaces that can support its weight.
- Always route the cables in a way, so that they cannot be tripped over, pulled or grabbed.
- Do not press hard or put pressure on the LCD panel. It can cause the panel to brake, shatter or make permanent marks.
- If the panel does brake, do not make contact with the liquid in the panel. This can cause skin irritation. If the liquid gets on your skin, rinse the skin for 15 minutes. If the liquid gets in your mouth, immediately gargle and consult your doctor.
INSTALLATION
Mounting the stand
- Place the TV with the front panel facing downwards. Make sure to place the front panel on soft cloth, soft pads or another soft piece of material.
- Insert the stand into the holes located on the bottom of the TV (L for left, R for right).
- Insert the screws into the sockets and tighten them.
Mounting on the wall
The TV has VESA mounting holes for wall mounting bracket (not included). Make
sure that your bracket is the compatible one with the TV. VESA standard
determines the width and height of the mounting holes for the bracket. Before
mounting the TV on the wall:
- Follow all instructions from the wall mount manufacturer.
- If you have any doubts about your ability to safely install the TV on the wall, contact a professional.
- Make sure that the wall can support the weight of the TV and the mount.
- When installing the TV on the wall, do it with someone to help you.
- Make sure that the TV has at least 20 cm clearance from each side.
BUTTONS ON THE TV
Note: the location, name and availability of the buttons may vary
according to the TV model.
- SOURCE: opens the inputs menu.
- MENU: open the main menu.
- CH-: previous channel/option.
- CH+: next channel/option.
- VOL-: decrease volume.
- VOL+: increase volume.
- POWER: turn on or off the TV.
INSTALLING BATTERIES
- Open the battery compartment by sliding it to the side.
- Insert new batteries, according to the polarity.
- Close the battery compartment.
SOCKETS
REMOTE CONTROL
- Power: turn on or off the TV.
- Mute: mutes the sound
- Number keys
- TV/RADIO: switch between television and radio
- Previous channel
- Vol -/+: adjust volume level
- Picture settings
- Sound settings
- CH: switch channels
- Source: open input source menu
- Disp: shows information about the picture and sound
- TXT: open Teletext
- Menu: open main menu
- Exit: exit the menu
- Arrow buttons: move within menus
- OK: confirm entries
- Mix: channel list
- Cancel: cancel a menu
- Color buttons: additional functions
- Playback controls
- SIZE: adjust the picture size
- Record the program
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) (Applicable in the European Union
and other European countries with separate collection systems) This marking
shown on the product or its literature, indicates that it should not be
disposed with other household wastes at the end of its working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400
Miętne.