LIQUID STANDS MS1086 Adjustable Keyboard Bench Seat User Guide
- June 2, 2024
- LIQUID STANDS
Table of Contents
LIQUID STANDS MS1086 Adjustable Keyboard Bench Seat
PARTS INCLUDE
ASSEMBLY TIME
- Screw the Legs (A) into the seat with the Small Allen Screws (H). Use the Small Allen Wrench U) to secure them. The holes for the Braces (F) should be facing inward while the holes for the Knobs (G) should be facing the same direction.
- Use the Small Allen Wrench U) to screw the Braces (F) into the seat and into the legs.
- Attach the Crossbeam (C) with the Big Allen Screws (1) by using the Big Allen Wrench U), Make sure it is tight and secure on both ends.
- Insert the Base (B) into each Leg (A). The holes for the Knobs (G) on the Legs (A) and the holes on the Base (B) must line up on the same side.
- Screw the Knob (G) into each leg to secure the Base (B). The Knobs (G) are spring -loaded so you can adjust the height of the Base (B) by pulling the Knob (G).
- The rubber feet that cover the end of the Base (B) can be rotated to eliminate wobble that occurs on uneven surfaces.
Have any questions or feedback?
We engineered our seat to work for YOU – whether you are at home, in the
studio or gigging out. Do you have an idea to make this seat better?
WE ARE LISTENING!
Shoot us an email at:
featurerequest@liquidstands.com
If our team adds your request to our seat, you will receive a free seat that
includes the new feature and you will be mentioned with our other customers
below!
Customer Feature Requests Used to Improve Our Seat: Waiting for your request!
FULL 10-YEAR WARRANTY against any damages or defects.
Visit LiquidStands.com to register and get exclusive coupons
CONTACT INFO
customercare@liquidstands.com
Text or call us: 813-304-2224
Read User Manual Online (PDF format)
Loading......