LIQUID STANDS MS1087 Keyboard Stand 2nd Tier User Guide
- June 2, 2024
- LIQUID STANDS
Table of Contents
LIQUID STANDS MS1087 Keyboard Stand 2nd Tier
PARTS INCLUDE
ASSEMBLY TIME
- Remove the cover cap at the back of the top part of the Keyboard Stand.
- Assemble items A and B with the Allen Screw (C), don’t forget to include the washer.
- Insert the vertical telescoping bar at the back where the cover cap was removed, then tighten it with the allen key (D). Do the same at the other side of the Keyboard Stand.
- Secure the telescoping bar with the Pull-knob (E). The knobs are spring-loaded so you can adjust the height.
- Attach the Crossbeam (F) between the 2 telescoping bars (A) then secure it with the Butterfly Knobs (H).
- Attach the Arms (I) on the Crossbeam (F). If placing an arm on the smaller telescoping bar, use the arm adapter (G) to make both arms even and secure.
- If your keyboard supports security straps, screw the straps (J) into the support arms.
Have any questions or feedback?
We engineered our stand to work for YOU – whether you are at home, in the
studio or gigging out. Do you have an idea to make this stand better?
WE ARE LISTENING!
Shoot us an email at:
featurerequest@liquidstands.com
If our team adds your request to our stand, you will receive a free stand that
includes the new feature and you will be mentioned with our other customers
below!
Customer Feature Requests Used to Improve Our Stand:
“It doesn’t have a ‘keyboard stand strap’ to prevent knock-offs when drummers
go wild.” – Science Guy.
FULL 10-YEAR WARRANTY against any damages or defects.
Visit LiquidStands.com to register and get
exclusive coupons!
CONTACT INFO
customercare@liquidstands.com
Text or call us: 813-304-2224