Nodon CWS-4-1-00 Wall Switch User Guide

June 2, 2024
NODON

Nodon CWS-4-1-00 Wall Switch

Nodon CWS-4-1-00 Wall Switch 

WALL SWITCH

Reference : CWS-4-1-00
Power supply : Integrated Kinetic Energy Harvester
Operational temperature : -20 / +65°C
RF band : 2.4 GHz IEEE 802.15.4
RF Power max : 7dBm/5mW
Protocol: Zigbee Green Power (Generic Switch)
Signal range : 15m
Dimensions : 80 mm (W) x 80 mm (L) x15 mm (h)
Supported Radio Channels : Channel 11 … 26 (Default: Channel 11)
Protection rating : IP20
Weight: 53g
Warranty: 2 years

| Wireless| | No battery| | Green Power
---|---|---|---|---|---

USE CAUTIONS

  • Do not swallow
  • Not suitable for children under 3 years

APPROVALS AND CERTIFICATIONS

Hereby, Nod On SAS declares that this radio equipment is conform to the RED directive 2014/53/UE. The integral text of the EU declaration of conformity is available at the following online address: nodon.fr/en ”support” section.
The presence of this symbol on a product indicates that this one is conform to the European directive 2012/19/UE. Find out more about the provisions in force in your region regarding the separate collection of electrical and electronical devices. Respect the local rules and do not throw out the product with common domestic wastes. The correct rejection of ancient products allows to preserve the environment and health.
This product must be used indoor only
This product is conform to Zig bee green power radio protocol.

INSTALLATION

The support can be glued thanks to the two self-adhesive strips (supplied) or screwed (screws not supplied).
Installation

|
---|---
Push in the middle to open.| Double button assembly

USE

The switch supports all 16 Radio Zig bee channels in the 2.4 GHz band IEEE 802.15.4

To put it into service (learn), you need to know the destination radio channel.

If the intended receiver or network operates on one of the primary radio channels (11, 15, 20, 25), direct commissioning is carried out in 2 steps:

  • The commissioning request is triggered by a long press (7 seconds or more) on one of the 4 buttons (see table below)
  • The radio channel must be confirmed by pressing buttons AI and B0 simultaneously
Button Radio Channel
A0 15
B0 11
AI 20
BI 25

To commission the switch directly on a receiver operating on channel 15, for example:

  1. Long press of 7 s or more on button A0
  2. Check that the receiver has received and accepted the commissioning telegram.
  3. Confirm the selected radio channel (in this case 15) by pressing AI and B0 simultaneously.

Use

CUSTOMER SUPPORT

CONTACT

NodOn SAS – 121 rue des Hêtres 45590 St CYR EN VAL- (FRANCE)

AFTER-SALES SERVICE

nodon.fr/en section “support” support@nodon.fr

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals