BLAUPUNKT CD3010 Cordless Drill/Driver Instruction Manual

: June 4, 2024
: Blaupunkt

Table of Contents

IMPORTANT INFORMATION
SYMBOLS
Description of the device (Fig.1)
CHARGING THE BATTERY
OPERATION
CLEANING AND MAINTENANCE
Technical data
EC — DECLARATION OF CONFORMITY
Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLAUPUNKT CD3010 Cordless Drill/Driver Instruction Manual

IMPORTANT INFORMATION

To achieve the highest satisfaction, enjoy the product’s performance and learn about all its features and functions, please read this manual before using the product.
Before using the device, read the Operating Instructions and comply to its contents. The manufacturer shall not be liable for any damage caused by the use of the device other than for its intended purpose or by improper handling.
Keep these Operating Instructions for future reference.

This device is for domestic use only. Do not use for any other purposes.
The device should only be connected to an socket with values corresponding to the values on the rating label.
It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.
Do not let cord hang over edge of counter, or touch any hot surface.
The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
Before maintenance work always disconnect the unit from the power supply.
When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord. Damage to the power cord or plug can lead to an electrocution hazard.
Never leave the product connected to the power source without supervision.
Never put the power cable, the plug or the whole device into the water or any other liquids.
The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
This equipment can be used by children aged 8 years and over under as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks.The instruction manual should be used as a reference for the safe use of this equipment. Child ren should not play with the equipment. Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
Never use the product close to combustibles.
Never expose the product to atmospheric conditions such as direct sun light or rain, etc… Never use the product in humid conditions (like bathroom or camping house).
The power cable should be periodically checked for damage. If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it.
All the repairs should only be performed by authorized service professionals. Any attempted authorized repairs performed can be a hazard to the user.
Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
Keep your workplace tidy and well lit.
Disorder and insufficient lighting lead to accidents.
Do not use power tools in explosive atmospheres, i.e. in the presence of flammable liquids, gases or dust.
A moment of carelessness may cause losing control of your tool.
If it is possible to fit power tools for dust extraction or collection, check that they are fitted and working correctly. Using such power tools reduces the risk posed by the presence of dust.
Do not lean out too far when working with your power tool. Maintain a stable posture and balance. This allows you to keep better control of your power tool in unforeseen situations.
Avoid starting the power tool unintentionally. Make sure the power switch is in the OFF position before connecting the power tool to the mains. Carrying a power tool with your finger on its trigger or plugging in a power tool after switching it on can lead to accidents.
Wear appropriate clothing. Do not work in loose clothing and do not wear jewellery while working. Keep your hair, clothing and gloves away from moving parts. The moving parts of a power tool can catch and pull in loose pieces of clothing, jewelry or long hair.
Remove any spanners or tools from the power tool before starting it. A tool or spanner still connected to the rotating part of the power tool may cause personal injury.
Be careful when working with power tools, concentrate on your work and use common sense. Do not use a power tool when tired or under the influence of drugs, alcohol or medication. Even a moment of carelessness while working with a power tool can lead to a serious accident.
Keep children away from the work area and DO NOT allow children to pull on the power cord – this can cause serious injury.
Always place and use the power tool on a stable, level and horizontal surface.
Before making any adjustments, changing accessories or storing the power tool, move the switch to the off position to disconnect the power tool from the power supply. Such precautions reduce the risk of accidentally starting the power tool.
Check the grinder housing for damage before each use.
Ensure that the vents are free from debris.
The device may only be used in a dry, well-lit environment.
This tool should not be used by anyone under the age of 16. The device is intended for outdoor use only. Do not use for other than its intended purpose.
Only charge the batteries in chargers specified by the manufacturer. There is a danger of fire if a charger designed for specific battery types is not used as intended.
The battery should only be used in the manufacturer’s equipment. This is the only way to protect the battery from dangerous overloading.
Only use the power tool with the correct batteries. The use of other batteries could cause a risk of personal injury and a fire hazard.
The battery can be damaged by sharp objects such as nails or screwdrivers as well as external forces. The battery may then short circuit internally and burn out, explode or overheat.
When not in use, keep the battery away from metal items such as paper clips, coins, keys, nails, screws or other small metal objects that could short-circuit the battery terminals. A short circuit between the battery terminals can cause burns or a fire.
Vapours may occur if the battery is damaged or not used as intended. The battery may catch fire or explode. Provide access to fresh air or contact your doctor in the event of any discomfort. Vapours may irritate the respiratory tract.
Do not open the battery. Short-circuit hazard.
Wait until the power tool stops moving before putting it down.The work tool may jam and lead to a loss of control of the power tool.
Storing or using the battery in unsuitable conditions can cause electrolyte leakage. Avoid contact with the electrolyte, and flush the skin with water in the event of accidental contact. Additionally, seek medical advice if the electrolyte comes into contact with the eyes. Electrolyte leaking from the battery can cause skin irritation or burns.
When carrying out work where the tool or clamping attachment could come into contact with concealed electric wires, hold the power tool only by insulated surfaces. Contact of the tool or clamping attachment with a live electrical conductor may cause voltage to be transmitted to non insulated metal parts of the power tool, causing a risk of electric shock.
Loss of control of the power tool may result in personal injury.
Use appropriate detectors to locate the installation or seek assistance from your local service provider. Contact with live wires may result in a fire or electric shock. Damage to the gas tube may lead to an explosion. Bursting of a water pipe leads to material damage.
Hold the power tool firmly. High reaction torques may periodically occur while tightening and loosening screws and bolts.
Secure the workpiece. Clamping the workpiece in a clamping device or vice is safer than holding it by hand.
The power tool is designed for screwing and unscrewing screws and drilling in wood, metal, ceramic tiles and plastics.

SYMBOLS

The following symbols may appear in the operating instructions or on the tool’s nameplate.
These signs contain important information about the product and instructions on how to use it.

| Read the user manual.| | Wear protective footwear
---|---|---|---
| The product complies with EC safety standards| |

Use ear protection

Wear protective clothing

Wear safety glasses

Wear respiratory protection

Device is compliant with EU directives:

Low voltage directive (LVD)
Electromagnetic compatibility (EMC)
Device marked CE mark on rating label

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 201 2/J 9/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance in the common waste bin.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be dispose with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.

Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

WEAR PERSONAL PROTECTIVE EQUIPMENT

Wear safety glasses according to En J66
Use protective masks in accordance with EnJ49
Use other types of proper personal protective equipment, depending on the type of work involved.

Description of the device (Fig.1)

Product Description

Quick-clamping drill chuck
Trigger button
Rotation direction switch
Chuck
Battery
Torque switch
Gear selector
Battery charge indicator
LED work light
Belt clip

CHARGING THE BATTERY

Insert the charger plug into the battery socket
Connect the charger to the power source
The time to fully charge the battery at 20°C is 3 to 5 hours
The indicator light may not light up if the battery overheats due to direct sunlight or other factors. If this happens, allow the battery to cool down and then restart the charging process.
Due to their internal chemical composition, batteries that have never been used or that have not been used for a long time may not reach their full capacity during the first or second use. This is temporary. Repeat the charging process three times to restore optimum battery performance.

OPERATION

CAUTION: Before starting the appliance for the first time, read the warnings at the beginning of the manual.

SWITCHING ON THE WORK LIGHT

Press the trigger button to switch on the work light (4).
The light remains on while the trigger is pressed
The light switches off 10-15 seconds after the trigger is released.

TORQUE SELECTION

Turn the torque switch to the desired position (5) to select the torque.
There are 17 positions indicated on the torque switch.
Choose low torque for working with short screws for less demanding tasks.
Each clockwise turn increases the torque.
The maximum torque position is the drilling position indicated on the controller by the drill icon (6).

At this position, the clutch mechanism will not be active during more demanding screw driving operations.

ATTACHING ACCESSORIES

After inserting the accessory into the quick-clamping drill chuck, tighten the chuck by turning it clockwise (7).
Switch off the cordless drill driver and tighten the drill chuck firmly if the accessory loosens during operation.
Loosen the bit chuck by turning it counter-clockwise to remove the additional piece.
Check that the battery has been installed correctly.
Check that the correct direction of rotation is selected (8).

GEAR SELECTOR

The cordless drill driver has two gears:short and long.
Set the gear selector to the desired position (9) to change the gear.

TRIGGER

When pressed, the drill bit tarts to rotate.
You can control the spinning speed by varying the pressure on the trigger.
Press the trigger gently for slow drill bit rotation, which increases with increasing pressure on the trigger.

BELT CLIP

The belt clip is designed for hanging the cordless drill driver on your belt (10).
As a result, the user has both hands free and the cordless drill driver is always close at hand.

CLEANING AND MAINTENANCE

Clean the device with a damp cloth. Do not use solvent-based cleaning agents. Do not immerse the device in water. Do not clean the unit with water from a hose or a pressurised water jet. Switch off the device before cleaning.

Technical data

No-load speed: 0—350/0— J 350 rpm
Clutch adjustment: J7+ J
Maximum torque: 20/30 Nm.
Max drill chuck: 1 0 mm double sleeve chuck 2 gears
Maximum drilling diameter: wood -20 mm, metal – 8 mm
Lithium-ion battery: max. 1 2 V/1.5 Ah
Dimensions: J 9.J x 5.5 x J 9.5 mm
Weight: J kg

Power supply:

Input voltage and current: 1 00-240 V -50/60 Hz 0.7 A
Output voltage and current: DC J3.5 V, J.5 A

Noise
Typical A-weighted noise level measured in accordance with EN 6284J :

Sound pressure level (LpA): 69 dB (A)
Measurement uncertainty (K): 5 dB (A)
Noise level during operation may exceed: 80 dB (A).
Wear hearing protection!

Vibrations

Total vibration value (triaxial vector sum) measured in accordance with EN 6284J:

Vibration emission (ah): J.654 m/s2
Measurement uncertainty (K): J.5 m/s2
Operating mode: metal drilling

EC — DECLARATION OF CONFORMITY

01/2022/CD3010
MANUFACTURER:

BLAUPUNKT COMPETENCE CENTER
2N-EverpoI Sp. z o.o.
ul. Putawska 403A
02-801 Warsaw, Poland

Authorized person to prepare the technical documentation: Tomasz Jakobczyk
02-801 Warsaw, Poland

We declare under our sole responsibility that our product:

Type of device: Cordless drill
Name: CD3010

If used for its intended use complies with the essential protection requirements relating to the:

2014/30/EU (EMC Directive)
2014/35/EU (LVD Directive)
2006/42/EC (MD Machinery Directive)
2000/14/EU (+2005/88/EU)
2011/65/EU (RoHS Directive) and its Annex II amending directive
2015/863/EU

The assessment of this product has been based on the following standards:

EMC standards:

EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013+A1:2019
EN IEC 55014-1:2021
EN IEC 55014-2:2021

MD and LVD standards:

EN ISO 12100:2010
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019
EN 62233:2008
EN 60335-2-29:2004+A11:2018
EN 62841-1:2015
EN 62841-2-1:2018+A11:2019

RoHS standards:

EN IEC 63000:2018

Conformity with 2000/1 4/EC (+2005/88/EC) assessment method used:

2000/14 / EC and amended by 2005/88 / EC Annex V

Support

Competence Center
2N-EverpoI Sp. z o.o.
ul. Putawska 403A
02-801 Warsaw, Poland
phone: + 48 22 688 08 00
e-mail: info@everpol.pt
www.blaupunkt.com

In case of questions or problems please contact our service.
Tel. 00 48 22 688 08 33
Email: tools@blaupunkt.pl
All rights reserved. All brand names are registered trademarks of their
respective owners. Specifications are subject to change without prior notice.