WI-BTAPP100X Wicked Hum 1000x Headphones User Guide

June 2, 2024
WICKED

WI-BTAPP100X Wicked Hum 1000x Headphones

WI-BTAPP100X-Wicked-Hum-1000x-Headphones-PRODUCT

Connecting Bluetooth

  1. Charge Headphones using the charging cable

  2. Hold the Bluetooth button for 3 seconds.
    The LED will flash red and blue.

  3. Connect Bluetooth
    Find “Wicked Hum1000x” in your device’s Bluetooth menu and select to pair. LED will slowly flash blue.

ANC (Active Noise Cancelling)
Turn ANC on and off with the ANC toggle button.

INFO: See full product instructions at: go.wickedaudio.com/Hum1000x

WI-BTAPP100X-Wicked-Hum-1000x-Headphones-FIG-2

Download the Wicked Audio App
go.wickedaudio.com/app
Access full features with the app.

PRECAUTIONS

  • LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE.
  • Overexposure to excessive sound levels can damage your ears resulting in permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs.

SAFE USE & HAZARD WARNINGS
90 dB SPL at 8 hours, 95 dB SPL at 4 hours, 100 dB SPL at 2 hours, 105 dB SPL at 1 hours, 110 dB SPL at 30 min, 115 dB SPL at 15 min, 120 dB SPL: Avoid as damage may occur

IMPORTANT SAFETY INSTRUCTION

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings
  4. Follow all instructions.

Attention should be drawn to the environmental aspects of battery disposal; The use of apparatus in moderate climates

Trende exemption is standard in Canada
Operation is subject to the following two conditions:

  1. This device may not cause interference,
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential as the radiate radio queue generated, des to installed, and used by the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, interference by our or more of the twin’s measures:

  • Reorient or relocate the receiving antenna
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet the general KR exposure requirement. The device can be used in Importable exposure conditions without restriction

LIMITATION OF LIABILITY
Any Changes or modifications not expressly approved by the party responsible for compliance could void the device that has been evaluated to meet the general Re-exposure requirement. The device can be used in portable exposure conditions without restriction.

  • In no event, under any cause of action of theory liability, shall Wicked Audio Inc., distributors, or suppliers be liable to you or any third party, indirect, incidental. consequential, special, exemplary, or punitive damages, of any nature whatsoever, arising out of the use of or inability to use a product.
  • This includes without limitation, property damage, loss of value of the product or any third-party products that are used in or with the Audio Audit rods seen advised Wicked has been advised of the possibility of such damages that one may encounter. Without limiting the foregoing, you understand and agree that Wicked Audio has no liability for any damages or destruction to the consumer electronics devices or other personal property that are contained inside or outside the Wicked Audio products. This includes without limitation, laptops, cellular phones, or other hand-held devices, or any loss of data contained on the foreign device.
  • Notwithstanding any damages that you might including negligence or of wise, the entire aggregate liability of Wicked Audio and any of its distributors and/or suppliers shall be limited to the amount paid by you for the Wicked Audio product giving rise to liability.
  • Some states and/or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, 50 the above limitations or exclusions may not apply to you.
  • The limitations of liability set forth above shall apply to the maximum extent permitted under applicable law.

Made in China

  • MODEL #: WI-BTAPP1000
  • IC: 20526-WIBTAPP100X
  • FCC: 2AFM7WI-BTAPP100X

WARRANTY

LIMITED ONE-YEAR WARRANTY

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

WICKED User Manuals

Related Manuals