TOTALLY wicked B06Y69TD1M CS Atomizer Head Range User Manual
- June 4, 2024
- TOTally wicked
Table of Contents
TOTALLY wicked B06Y69TD1M CS Atomizer Head Range
AVAILABLE RESISTANCES
Resistance (ohms)| Coil Material| Wicking Material| Ideal
Power (watts)| Power Range (watts)
---|---|---|---|---
CS-M 0.6| Kanthal| Natural Cotton| 17.5| 8 – 22
0.75| Nickel-Chrome| Natural Cotton| 18| 14.5 – 25
1.2| Nickel-Chrome| Natural Cotton| 16| 13 – 30
1.5| Nickel-Chrome| Silica| 12| 7 – 15
1.6| Stainless Steel| Natural Cotton| 10.5| 6 – 14
CS-M 0.35| Kanthal| Natural Cotton| 30| 12 – 50
0.15| Nickel| Natural Cotton| Temperature controlled atomizer head
CS-A 0.8| AST Steel| Natural Cotton| 11.5| 7 – 16
1.4| Kanthal| Natural Cotton| 9| 6 – 12
STANDARD ATOMIZER HEADS SUPPLIED WITH
KITS AND TANKS:
- arc 5 kit – 1.5ohm
- arc Mini kit – 1.5ohm
- arc Palm kit – 1.5ohm
- arc Pico Baby kit – 1.5ohm, 0.75ohm
- arc Slim kit – 1.5ohm
- Aura kit – 1.5ohm
- Resolve 2 kit – 0.75ohm
- CS Air 2 tank – 1.5ohm
- CS Air Baby tank – 1.5ohm
- CS Air Slim tank – 1.5ohm
- CS Aura tank – 1.5ohm
- CS Micro tank – 1.5ohm
- CS Resolve 2 tank – 0.75ohm
- Slider CS Air tank – 1.5ohm
- Eleaf Tance Max – 0.6ohm, 1.6ohm
- Intu Pro Mini kit – 0.8ohm
- CS Pro tank – 0.8ohm
FEATURES AND BENEFITS
- The CS 1.5ohm atomizer head delivers an outstanding vape experience and suits regular vapers who wish for their vaping experience to be reminiscent of smoking. This atomizer head is suitable for the vast majority of vapers.
- The CS 1.2ohm atomizer head has a greater airflow than the 1.5ohm atomizer head and can be used at higher powers. For vapers looking for greater vapour production whilst retaining excellent battery life the CS1.2ohm atomizer head should be recommended
- The CS 0.75ohm atomizer head has a greater airflow and higher power than the CS 1.5ohm atomizer head which may not appeal to all vapers, but is recommended to vapers looking to increase vapour production.
- Working power range of between 7 and 50 watts.
- The CS-M 0.35ohm atomizer head has the greatest vapour production of the range and is a good upgrade for arc 5 and arc Palm users looking for increased vapour production.
- The CS 1.6ohm atomizer head provides a good MTL experience at a slightly lower wattage that the CS 1.5ohm.
- The CS-A 0.8ohm atomizer head offers dry burn protection, this mode is only compatible with AST atomizer heads and the Intu Pro Mini
COMPATIBILITY
- All nickel-chrome atomizer heads are compatible with power, bypass, variable voltage and smart modes.
- The CS-Ni 0.15ohm nickel atomizer head will fit any tank which accepts a CS atomizer head but can only be used with devices that support temperature controlled vaping.
- The arc Mini requires a minimum resistance of 1.0ohm.
- The CS-M is compatible with the arc 5 and arc Palm only
PRODUCT INFORMATION
CS ATOMIZER HEADS
PRIMING
CS atomizer heads are primed by dripping a few drops of e-liquid into the
central hole. After priming a new atomizer head and filling the tank, it is
recommended to wait 5 minutes before vaping to ensure the atomizer head is
fully saturated.
ADDITIONAL NOTES
- The CS 1.2ohm atomizer head is suitable for vapers using variable power devices looking for increased vapor production.
- If the airflow of an atomizer head is too great this can be reduced by adjusting the airflow of the tank (on tanks with airflow control).
- The amount of vapour produced by a Resolve 2 kit can be reduced by replacing the supplied CS 0.75ohm atomizer head with the CS 1.5ohm.
- The arc Mini outputs significantly more power than it displays on the screen, this is especially true when lower wattages are selected. For example the arc Mini set to output 6 watts will actually deliver 10 watts. Advise customers to use lower power settings than with other variable wattage devices.
- The CS 1.4ohm atomizer head, whilst offering similar resistance to the 1.5ohm, uses a different orientation and wicking material, allowing for better use with top-filled CS tanks. This is achieved by using a vertical coil arrangement.