thermogroup UVS900H Vertical Non Heated Towel Rail Instruction Manual

: June 2, 2024
: Thermogroup

Table of Contents

thermogroup UVS900H Vertical Non Heated Towel Rail
PRODUCT INFORMATION
Product Usage Instructions:
FAQ
Check you’ve got everything
Safety Information
KEY
Technical Speciﬁcations
Care Information
Warranty Information
Contact Us
Read User Manual Online (PDF format)
Download This Manual (PDF format)

thermogroup UVS900H Vertical Non Heated Towel Rail

hermogroup-UVS900H-Vertical-Non-Heated-Towel-Rail-
FIG-1

PRODUCT INFORMATION

Technical Specifications:

CODE: UVS900H
NO. OF BARS: 1
FINISH: Polished
SIZE (MM): W142xH900xD100
WARRANTY: 10 years

Product Usage Instructions:

Install two wall brackets
Measure and mark out the bracket positions ensuring they are level. Drill 8mm holes for each bracket and insert suitable wall plugs. Secure the mounting brackets in place using a screwdriver and screws.

Fix Thermorail to the wall
Attach the Thermorail to the mounting brackets on the wall. Tighten the grub screws on the wall mount arms using the provided allen key.

Fix the hook to the vertical bar
If desired, slide the hook over the top of the vertical bar with the grub screw hole facing the wall. Use the short grub screw to fix it in place.

Care Information:
The finish of your Thermorail Non-Heated Towel Rail is hard-wearing and easy to maintain. Avoid harsh scrubbing or acid-based cleaning products. Clean with a soft cloth and non-abrasive cleaning agent for best results.

Warranty Information:
The warranty covers faults and problems from manufacturer’s errors. Improper use, carelessness, or incorrect wiring damage is not covered. Register online within 60 days of installation to activate warranty.

Contact Us:

Phone: 1300 368 631
Technical Helpline: 1300 989 464
Email: sales@thermogroup.com.au
Website: www.thermogroup.com.au

FAQ

Does the product come with all necessary installation hardware?
Yes, the product includes mounting brackets, wall plugs, screws, grub screws, a hook, and an allen key for installation.

Check you’ve got everything

hermogroup-UVS900H-Vertical-Non-Heated-Towel-Rail-
FIG-2

Thermorail Single Vertical Bar Rail
Screw Kit including:
- 2 x Mounting Brackets
- 2 x Wall Plugs
- 2 x Countersunk Screws
- 4 x M5x5 Grub Screws (2 spares)
- 2 x M5x3 Grub Screws (1 spare)
- 1 x Hook
- 1 x Allen Key

You will also need:

Cross Head Screwdriver
Pencil
Spirit Level
Tape Measure
Drill Bits
Cordless Drill

Safety Information

We recommend that the rail is installed onto a ﬂat uniform wall and where possible the Towel Rail should be screwed into studs or if ﬁxing to hollow walls suitable anchors should be used to ensure rail is secure.

Do not use the towel rail to hold towels or other articles that have been in contact with oil, petroleum based products or dry cleaning ﬂuids
Do not immerse your rail in any liquid
WARNING: In order to avoid a hazard for very young children, this appliance should be installed so that the base of the rail is at least 600mm above the ﬂoor.

KEY

hermogroup-UVS900H-Vertical-Non-Heated-Towel-Rail-
FIG-3

Stud work
Plasterboard & skim
Wall plug
Mounting bracket
Countersunk screw
Grub screw
Towel Rail

Install two wall brackets

Measure and mark out the bracket positions making sure they are level. Drill a 8mm hole for each of the two wall brackets and insert suitable wall plugs.
Fix the two mounting brackets in place using a screwdriver and screws.

Fix Thermorail to the wall
Fit the Thermorail to the mounting brackets installed on the wall. You may need assistance to hold the rail in place. Tighten the grub screws on the two wall mount arms using the allen key provided.

Fix the hook to the vertical bar
Please note that the hook is optional. Slide the hook over the top of the vertical bar (ensuring that the grub screw hole is facing towards the wall) and hold in desired position. Use the short grub screw to ﬁx in position.

Technical Speciﬁcations

CODE	NO. OF BARS	FINISH	SIZE (MM)	WARRANTY

UVS900H

……………………………….

| 1 Polished W142xH900xD100

……………………………………………………………………………………………….

| 10

………………………….

Care Information

The finish of your Thermorail Non-Heated Towel Rail is hard wearing and easy to maintain. However, any harsh scrubbing, scratching or acid based cleaning products will damage the surface of your towel rail. Cleaning with a soft cloth and a non-abrasive cleaning agent will give the best results.

Warranty Information

Thermogroup covers all its products with a satisfaction guarantee. In addition, Thermogroup will supply a replacement product where a fault is shown to be caused by manufacture, materials or workmanship providing the goods have been installed correctly and according to installation instructions. This guarantee does not include removal, freight or installation costs. Our goods come with guarantees that cannot be excluded under Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The details on the length of the warranty on the Non-Heated Vertical Bars is on page 3 of this installation guide. To use the warranty, repair or service the customer must provide purchase invoice/receipt and have completed the online warranty registration form. If the product develops a fault within the warranty period due to normal wear and tear, Thermogroup at its discretion will recognise whether it’s a faulty product or not. If it is impossible or not economical for the manufacturer to repair the product, the manufacturer will replace the faulty product with a new unit of the same model or if there is no stock available of the same model as the product, the manufacturer will replace the product with a new unit of a similar size. No responsibility can be taken for altered dimensions and lining up of existing holes.
The repair service offered within the warranty period only covers the faults and problems as developed from the manufacturer’s errors. Any damage caused by improper use or carelessness or incorrect wiring is not covered.
Thermogroup is not responsible for any monetary loss or injuries caused by improper use of this product.

Warranty Registration
The Thermorail Heated Towel Rail warranty against manufacturers defects is a limited liability warranty and will only apply if the product is registered online. Online registration must be completed within 60 days of installation. Failure to complete the warranty registration will void the warranty.