BOCCI 28.3 Pendant Chandelier Three Glass Ball Lamp Instruction Manual

BOCCI 28.3 Pendant Chandelier Three Glass Ball Lamp

• PENDANTS: three
• MOUNTING: 142mm (5.6”) x 35mm (1.38”)
• LAMPING: 1.5w LED
• STEM LENGTH 0.9m (3’) or 1.8m (6’) long stem
• ADDITIONAL
• EXTENDERS 153mm (6”) / 305mm (12”) / 914mm (36”) /m 1524mm (60”)
• MATERIALS: blown glass, electrical components, unlacquered brass or black powder coated brass stem, black or white canopy
• WEIGHT: approximately 4kg (8.9lb) / 5kg (11lb)
• POWER SUPPLIES: integral

DESCRIPTION

The stem ceiling mounted system comes in unlacquered brass or black powder coated stem with a 142mm (5.6”) diameter mounting plate rated for ceiling use. Individual 28 pendants result from a complex glass blowing technique whereby air pressure is intermittently introduced into and then removed from a glass matrix which is intermittently heated and then rapidly cooled. The result is a distorted spherical shape with a composed collection of imploded inner shapes, one of which acts as a shade for the light source. Standard 28s are made with clear glass exterior spheres and milk white interior lamp holder cavities. 28s are possible with infinite versatility in colour compositions, sizes and shapes.

NOTES

• Purchase replacement lamps online at www.bocci.com/shop/bulbs
• Power supply can be remote mounted with 94mm (3.7”) x 6mm (0.24”) canopy.
• The brass used in our Stem Series is untreated and, as such, will develop a natural patina over time. To avoid any marking or tarnish on the brass during handling and installation, please use the gloves provided in your shipment.
• To maintain your fixture, please regularly dust with a lint-free cloth. If further cleaning is required, dampen a lint-free cloth with water only and wipe gently to remove dust or debris.

1. Thread the cover cap on one end of the stem.
   Note: Bocci recommends wearing thin gloves during installation to protect the stem finish and the glass surface.

2. Connect the stem pieces by threading the stem connector to the stems.
   Note: This step is only necessary for overall stem lengths longer than 1.8m

3. Thread the pendant mounting plate onto the stem. Carefully insert provided lamp into socket.

4. Connect power supply to line voltage.

   •  Connect input low voltage wire to 12V DC output wires by feedingn the wires through the slots on the mounting plate.
   •  Connect the black wire to line wire and white wire to neutral wire.
   • Ensure that line voltage is not active during this part of the installation!
     Note: As an option, Bocci recommends mounting power supplies remotely in a close, accessible and hidden location for ease of long term maintenance. Installation to be done by certified personnel to ensure compliance with the code.

5. The client is responsible to ensure fasteners are attached to a robust structural substrate. Affix mounting plate to surface with fasteners provided.
   Thread canopy cover onto the mounting plate. Thread on the stem to canopy. Turn power to fixture on.

6. Gently thread pendant onto the stem. Be sure to carefully place them pendant so as not to damage the lamp during installation.. Clean fingerprints from fixture surfaces. US Patent # D687,740 EU Patent # 001695834-001 to 004 Made in Vancouver, Canada

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>