Vzyhik 3200W 4 Pack Solar Outdoor Light User Manual

Vzyhik 3200W 4 Pack Solar Outdoor Light

Product Information

Specifications

• Product Name: Vzyhik
• Size: 21.6 Inch
• Package Includes:
  • Solar light
  • Open spanner
  • Fixing arm pole
  • Battery
  • Backplate for pole mounting
  • Wall mount bolts
  • Backplate for luminaire mounting
  • Long bolts for pole mounting
  • Remote control
  • Short bolts for luminaire mounting

Product Usage Instructions

Wall Mount Installation:

1. Mark the hole location on the wall.
2. Drill 4 holes in the wall according to the position of the bracket’s hole.
3. Knock the bolts into the wall.
4. Mount the light, lock the screws, and tighten them.

Pole Mount Installation:

1. Secure the light to the pole with the long bolt and backplate.
2. Tighten the long bolt securely.

Led Indicator Meaning:

• Remote Control Receiver:
  • Power Display – Long press until the light turns on.
• Battery Capacity:
  • 40%
  • 20%
  • 100%
  • Motion Sensor Mode: When motion is detected, brightness increases to 100%. When no motion, brightness returns to 30% after 10-20 seconds.
  • 60%
  • 80%

FAQ

How does your solar-powered fixture work?
The solar-powered fixture charges during the day using sunlight and stores the energy in a battery. The fixture automatically turns on at dusk using the stored energy to provide light throughout the night.

Precautions:

• Ensure the fixture is in a bright sunny location during the day.
• Make sure the fixture is turned on (Auto).
• Check the power of the remote control battery.

Troubleshooting:
If the light does not turn on at dusk after 8 hours of charging, follow these steps:

• Ensure the fixture is in a bright sunny location during the day.
• Check if the fixture is turned on (Auto).
• Verify the remote control battery has power.
• If issues persist, contact customer support for possible battery replacement or controller faults.

Warranty:
Contact customer support for warranty information and assistance.

Warm Tips

• Step 1: Turn on the switch (Long Press Button)
• Step 2: Charging 2 hours under the sunlight
• Step 3: Test the remote controller work or not
  ( Note: Remote control is pointed at the receiver) Follow the instruction when you received

INSTRUCTION

Follow the instruction when you received:

1. Block the light sensor part (solar panel) and Turn on the switch (Long Press Button).
2. Charging 2 hours under the sunlight. The indicator light flashes to indicate that it is charging, the color of the fully charged indicator light is 2 red lights + 2 blue lights + 1 green light (Indicator no longer flashes).
3. Test the remote-controlled work or not.
   (Note: Remote control is pointed at the receiver)

PACKAGE

1. Solar light
2. Fixing arm pole
3. Backplate for pole mounting
4. Backplate for luminaire mounting
5. Remote control
6. Open spanner
7. Battery
8. Wall mount bolts
9. Long bolts for pole mounting
10. Short bolts for luminaire mounting

INSTALLATION

Wall Mount

• On the wall
  • Step 1: Mark the hole location, Drill 4 holes in the wall according to the position of the bracket’s hole.
  • Step 2: Knock the bolts into the wall.
  • Step 3: Mount the light, lock the screws and tighten them.

Pole Mount

• On the pole
  • Step 1: Secure the light to the pole with the long bolt and back plate.
  • Step 2: then tighten the long bolt.

Led Indicator Meaning

Power display meaning

Remote Control Buttons

Please insert the 2 batteries ((1.5 V AAA type). Make sure that the positive and negative ends are facing in the correct direction. the control distance of remote is 35ft.

Motion Sensor Mode

How does your solar-powered fixture work?

1. During the day, the solar converts sunlight into electricity and recharges the battery. At night, the light turn on automatically using the electricity stored during that day.
2. The number of hours the lights depends on your geographical location, weather conditions and seasonal sunlight availability.Also. it depends on the lighting time you choose.
3. Place the solar light fixture in an area where it can receive direct sunlight for at least 8 hours each day. Shadowed locations should not be near lights as these may cause the solar light to turn off prematurely.

Precautions

1. First time of use, place the solar light in a location where it can receive a full 8 hours of sunlight to allow the rechargeable battery to reach maximum capacity.
2. Then put the solar panel in the sun to charge Please choose a position without any shelter for enough sunshine and the solar panel should be fully exposed under the sun.
3. Keep the solar panel surface clean, this helps speed up charging. It is suggested to clean the solar panel for some time.
4. The light will turn off after running out of battery, especially in areas that lack sunlight, in cloudy winter and during long rainy weeks. If such a problem occurs first press OFF charge the solar panel for two days and then turn on.
5. Test light control: After blocking the solar panel, press the “ ” button, and the light is on; the solar panel is facing the sunlight, the light is off, and then the light control is normal.

Troubleshooting

If the light does not turn on at dusk after 8 hours of charging: *Ensure that the solar light fixture is in a bright sunny location and not in a shady area during the day.

• Make sure that the solar light fixture is turned on (Auto)
• Make sure that the remote control battery has power.
  If the above faults are eliminated, it may be that the solar battery needs to be replaced or the controller is faulty. Please contact me in time.

Warranty

We provide our customers with a warranty of 12 months from the date of purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>