Vzyhik 360000LM Solar Parking Lot Light User Manual
- June 15, 2024
- Vzyhik
Table of Contents
Vzyhik 360000LM Solar Parking Lot Light
Product Information
Specifications
- Product Name: Vzyhik
- Operating Temperature: 13-20°F
- Maximum Illumination Range: 13-20ft
Product Usage Instructions
Installation
To install the Vzyhik solar street light, please follow the steps below:
- Choose a suitable location for the solar street light, ensuring it receives direct sunlight for optimal charging.
- Securely mount the light fixture on a pole or wall using the provided mounting hardware.
- Connect the solar panel to the light fixture using the provided cable.
- Adjust the angle of the solar panel and light fixture to maximize exposure to sunlight.
- Tighten all connections and ensure the installation is stable.
Operation
Once the Vzyhik solar street light is installed, follow these steps to operate it:
- Turn on the light by pressing the power button located on the light fixture.
- The light will automatically turn on at dusk and turn off at dawn.
- During the day, the solar panel will charge the built-in battery for nighttime use.
- If desired, you can adjust the lighting mode or brightness using the control buttons, if available.
Maintenance
To ensure the longevity and optimal performance of the Vzyhik solar street light, follow these maintenance guidelines:
-
Regularly clean the solar panel to remove dirt, dust, or debris that may obstruct sunlight.
-
Inspect the light fixture for any signs of damage or wear.
Replace any faulty components immediately. -
Check the battery status periodically and replace it if necessary.
-
Keep the solar panel free from shading objects such as trees or buildings.
Frequently Asked Questions (FAQ)
Q: How long does the Vzyhik solar street light need to charge?
A: The charging time of the Vzyhik solar street light depends on the amount of sunlight it receives. On average, it takes around 6-8 hours of direct sunlight for a full charge.
Q: Can I install the Vzyhik solar street light indoors?
A: No, the Vzyhik solar street light is designed for outdoor use only. It requires direct sunlight for proper charging and operation.
Q: What should I do if the Vzyhik solar street light is not working?
A: If the light is not working, please check the following:
- Make sure the solar panel is receiving direct sunlight.
- Ensure that the battery is properly connected and charged.
- Verify that the power button is turned on.
- If the issue persists, contact our customer support with your Amazon order number for further assistance.
Q: Can I adjust the brightness of the Vzyhik solar street light?
A: Some models of the Vzyhik solar street light may have adjustable brightness settings. Refer to the product manual or control buttons on the light fixture for instructions on adjusting the brightness.
If you have any other questions or need additional support, please don’t hesitate to contact us. We are here to assist you.
Thank you for choosing the Vzyhik solar street light!
Package Include
Installation
- Recommended Installation Height: 13-20Ft
- The advised diameter of the pole is between 1.5-4IN
On the wall
- Step 1: Drill 4 holes in the wall according to the position of the bracket’s ‘hole.
- Step 2: Fix the light body on the mounting bracket and then tighten the screw.
- Step 3: Put the mounting bracket in the right position and knock the wall mount bolts into the wall, and tighten the screws.
On the pole
- Step 1: Fix the mounting bracket to the pole with the long bolts, and then tighten the screws.
- Step 2: Fix the light body on the mounting bracket and then tighten the screws.
Remote Control Buttons
- Please insert the 2 batteries ((1.5 V AAA type). Make sure that the positive and negative ends are facing in the correct direction. the control distance of the remote is 35ft.
- When you press the button ON, the solar street light will be 100% bright.
- When you press the button OFF, the solar street light will be turned off and cannot be turned on automatically until the next day. (Tips: You need to press ( )on the light body to turn off the solar street light completely.)
- Motion Sensor Mode: It turns the brightness up to 100% when motion is detected and turns the brightness back to 30% when no motion is detected.
- Timed Lighting: Timed 100% brightness Lighting 2/3/5/6/8 hours without radar sense motion function.
- Brightness level: you can set up the brightness level (25% / 50%/ 75%/100%) of the light.
Motion Sensor Mode
Warm Tips
- Please check the contents and test the product when you receive the package. (the solar street light won’t be turned on if the charging panel detects the light source )
- Install the solar street light in the best position of sunshine. Make sure to be far away from trees, buildings, or other shadows. Or the internal battery will not charge properly and the efficiency will of the solar panel be minimized, influencing the working time of the unit and battery.
- The charging efficiency of the solar panel depends on the weather conditions, the stronger the sunlight, the shorter the charging time and the lighting time may be shortened in the case of long-term cloudy days (rainy days), which is a normal phenomenon.
- Make sure the solar street light is stable and the switch is turned on after completing the installation.
- Please charge for 6-8 hours before using the solar street for the first time.
- The solar panel will be covered with dust when used outdoors for a long time.
- Please clean up regularly!
Warranty
- We provide our customers with a warranty of 12 months from the date of purchase.
- For any further questions about your solar street light, please send an email (the Amazon order number included) and we will respond to you within 24 hours. Thanks so much for your support!