Husky Liners 18491 Fit WeatherBeater Front Floor Liner Instruction Manual

June 2, 2024
HUSKY LINERS

**

Husky-Liners-LOGO**

Husky Liners 18491 Fit WeatherBeater Front Floor Liner

Husky-Liners-18491-Fit-WeatherBeater-Front-Floor-Liner-
PRODUCT

CARE AND USE INSTRUCTIONS

Thank you for selecting a WeatherBeater® Floor Liner from Husky Liners. Your new front floor liners are custom molded to fit your Honda Fit and Honda HR-V. The liners are made to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409® or Glass Plus® work well. Use of Armor All®, Son-of-a-Gun® or similar items is discouraged as these products make the liners slick.

INSTALLATION INSTRUCTIONS FOR YOUR HONDA FIT & HONDA HR-V FRONT FLOOR LINERS

Husky-Liners-18491-Fit-WeatherBeater-Front-Floor-Liner-
FIG-2

TO EASE INSTALLATION OF YOUR FRONT FLOOR LINERS, SLIDE BOTH FRONT ROW SEATS ALL THE WAY REARWARD SO AS TO ALLOW THE MOST LEG ROOM. ONCE YOU HAVE INSTALLED YOUR LINERS, REPOSITION THE FRONT SEATS AS DESIRED. NOTE THAT THE DRIVER’S SIDE LINER ATTACHES TO THE FACTORY MAT RETAINING FASTENERS LOCATED IN THE CARPET.

USING INSTRUCION

INCLUDED IN YOUR PACKAGING YOU WILL FIND A COMPONENT BAG WITH A FASTENER DESIGNED TO AID IN SECURING THE PASSENGER SIDE LINER IN PLACE. THE CLIP WILL PROVIDE A WATER-TIGHT SEAL SO MOISTURE WILL NOT PASS THROUGH TO THE FLOOR BELOW. TO INSTALL THE CLIP, FIRST REMOVE IT FROM THE BAG AND UNSCREW THE CAP FROM THE BASE (SEE IMAGE 1 BELOW). NEXT, INSERT THE THREADED PORTION OF THE BASE INTO THE HOLE IN THE DRIVER’S SIDE LINER, INSERTING IT FROM THE BACK SIDE OF THE LINER (SEE IMAGE 2 BELOW). WITH THIS DONE INSTALL THE LINER IN THE VEHICLE AND, USING A COIN, SCREWDRIVER OR SIMILAR TOOL, SCREW THE BASE OF THE FASTENER INTO THE CARPETING (SEE IMAGE 3). LASTLY, AS SHOWN IN IMAGE 4, INSTALL THE CAP ONTO THE BASE. TIGHTEN EACH CAP UNTIL IT MEETS RESISTANCE, DO NOT OVER-TIGHTEN.

HERE IS A LINK TO AN INSTALLATION VIDEO: https://www.youtube.com/watch?v=d29LSqPA9Us

Husky-Liners-18491-Fit-WeatherBeater-Front-Floor-Liner-
FIG-1

View the Husky Liner Lifetime Warranty at www.huskyliners.com/lifetime- warranty
1849_Installation Instructions Front_Back

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals