Pulsar Stream Vision Ballistics for Android User Guide

Pulsar Stream Vision Ballistics for Android

Product Information

Specifications

• Compatibility : Android
• App : Stream Vision Ballistics
• Firmware version requirement : 3.0 or higher
• Connectivity : Bluetooth

Product Usage Instructions

Getting Started

1. Install the Stream Vision Ballistics app from Google Play or the AppStore.
2. Go to the Profiles tab.
3. Create a profile for your riflescope, ammunition, and zeroing distance. Adjust ballistic parameters if needed.
4. Adjust the temperature, pressure, and humidity while zeroing.
5. Enter a profile name and save it.
6. Connect your riflescope to your smartphone using Bluetooth. Ensure that your riflescope has firmware version 3.0 or higher.
7. Load the profile onto the riflescope.
8. Set the desired profile as Active in the riflescope’s profile selection menu.
9. Enable Show Range and Ballistic Calculator options in the riflescope’s rangefinder menu.
10. Activate the rangefinder by briefly pressing the LRF button on the riflescope.
11. Aim the rangefinder target at the object and press the LRF button. The recommended aiming point and correction values will be displayed on the screen.
12. Verify the accuracy of your profile settings with a test shot on the shooting range.
13. To use weather data in your geolocation while shooting, go to the Device tab, select your riflescope, and choose Set outdoor.
14. Note : You can customize correction units or disable the ballistic calculator in the Rangefinder section of the main menu.

How to Connect to the Device

1. Turn on the riflescope.
2. Enable Bluetooth in the riflescope’s settings.
3. Activate Bluetooth pairing mode in the riflescope.
4. Turn on Bluetooth on your smartphone.
5. In the Stream Vision Ballistics application, go to the Devices tab and tap Connect Device.
6. Click Connect next to your device.
7. Enter the password displayed on the riflescope screen and tap Connect.
8. The blue Bluetooth icon next to the riflescope indicates a successful connection.

Setting up Profiles in the Riflescope Memory using the Application

2. In the opened menu, configure the profile details such as name, ammunition type, riflescope height, zeroing distance, and weather conditions.
3. To use the profile for the built-in ballistic calculator in the riflescope, activate the Ballistic parameters switch.
4. To add a profile to the application database, tap Add to Library. If a profile with the same name already exists, change the name.
5. Save the changes.
6. Set the desired profile as Active by tapping the button next to it.
7. To load a profile from the application database, select it from the list.

FAQ (Frequently Asked Questions)

• Q: Can I manually enter ammunition parameters if they are not on the list?
  A: Yes, you can manually enter ammunition parameters if they are not available in the provided list.

• Q: How do I verify the accuracy of my profile settings?
  A: You can verify the accuracy of your profile settings by conducting a test shot on the shooting range.

• Q: Can I disable the ballistic calculator?
  A: Yes, you can disable the ballistic calculator in the Rangefinder section of the main menu.

Getting Started

1.  Install the Stream Vision Ballistics app from Google Play or the AppStore.
2. Go to the Profiles tab.
3. Create a profile for your riflescope, ammunition and zeroing distance. Turn on ballistic parameters and adjust them depending on your ammo. If your ammo is not on the list, you can enter its parameters manually.
4. Adjust the temperature, pressure and humidity of the environment while zeroing.
5. Enter a profile name and click save .
6. Connect your riflescope to your smartphone using Bluetooth. First, make sure that your riflescope has the latest firmware version 3.0 or higher installed.
7. Load the profile onto the riflescope. To do this, go to the “Device” tab –> Select your riflescope –> “All device profiles” -> click on the profile you want to replace and select the created profile from the list
8. Set the status to “Active” for the ballistic profile. To do this, click on the button next to the desired profile, or select it in the profile selection menu in the riflescope.
9. Make sure that the Show Range and Ballistic Calculator options are enabled in the riflescope’s rangefinder menu.
10. Briefly press the LRF button to activate the rangefinder in the riflescope.
11. Aim the rangefinder target at the object and press the LRFbutton. The screen will display the recommended aiming point and correction values in the upper right corner.
12. Check the accuracy of your profile settings with a test shot on the shooting range.
13. To activate the use of weather data in your geolocation while shooting, go to the “Device” tab -> Select your riflescope -> Select “Set outdoor”.

Note : You can set correction units or disable the ballistic calculator in the Rangefinder section of the main menu.

How to connect to the device

1. Turn on the riflescope

2. Turn on Bluetooth in the settings of your riflescope

3. Turn on the Bluetooth pairing mode in the riflescope

4. Turn on Bluetooth on your smartphone.

5. In the Stream Vision Ballistics application, on the Devices tab, tap “Connect Device”.

6. Click “Connect” next to your device.

7. Enter the password that appears on the riflescope screen and tap “Connect”.

8. The blue Bluetooth icon next to the riflescope means that the riflescope is connected.

Setting up profiles in the riflescope memory using the application

1. Go to the “Devices” tab –> Select your riflescope –> “All device profiles” -> and select the desired profile.
2. In the opened menu, you can configure the profile name, ammunition type, riflescope height, zeroing distance, weather conditions.
3. To use the profile for the built-in ballistic calculator in the riflescope, activate the “Ballistic parameters” switch.
4. To add a profile to the application database, tap -> “Add to Library”. If the database already has a profile with the same name, change the name of the profile.
5. Tap to save changes.
6. Set the status to “Active” for the profile you want to use. To do this, tap the button next to the desired profile.
7. To load a profile from the application database, tap and select the desired profile from the list.

Setting up the profile database in the application

1. Go to the “Profiles” tab.
2. Click “Add Profile” to create a new profile, or select one of the existing profiles.
3. In the opened menu, you can configure the profile name, ammunition type, riflescope height, zeroing distance, weather conditions, or delete the profile.
4. To use the profile for the built-in ballistic calculator in the riflescope, activate the “Ballistic parameters” switch.
5. To delete a profile, scroll down the screen and click “Delete Profile”.

Saving profiles in the cloud
To save your profiles to cloud storage

1.  Go to the “Settings” tab.
2.  Click “Log In”.
3. Register or log in to your cloud storage account.
4. The profiles tab will display the profiles from your cloud storage. All changes will be synced to the cloud.

How to use a ballistic calculator without connecting to a riflescope

1.  Go to the “Calculator” tab.
2. Select the desired Pulsar device in the field , or leave the field blank if you have another device.
3. Select one of your profiles in the field .
4. Adjust the parameters of weather conditions, distance and angle of fire.
5. The vertical correction will be displayed in the Drop field.
6. The horizontal correction will be displayed in the Drift field.
7. By clicking on the fields “Drop”, “Drift” or “Click value”, you can select the appropriate units for corrections.
8. Tap “Reticle” to enlarge the window with the recommended aiming point.
9. Tap “Table” to calculate the amount of correction for different distances.

The resulting table can be saved in the application by tapping the button.
To share the table, tap the button and select the desired application.

How to create a ballistic table

1.  In the “Tables” tab, tap “Add Table”.

2. Select one of your profiles in the field .

3.  Select the desired Pulsar device in the field, or leave the field blank if you have another device .

4. Adjust the parameters for weather conditions, distance and angle of fire.

5. Adjust the step of the ballistic table

6. Tap the headings of the Elevation and Windage fields to select the appropriate correction units.

7. Values in the table are recalculated automatically when parameters are changed.
   Aim Offset Symbols

8.  Save the table by clicking the button .

9. To share the table, tap the button and select the desired application.

How to share a profile with another user

1. Create a ballistic profile in the app.

2. Load the profile into the riflescope.
   To do this, go to the “Device” tab –> Select your riflescope –> “All device profiles” -> tap next to the profile you want to replace and select the created profile from the list.

3. Check the accuracy of your profile settings with a test shot on the shooting range.

4. Connect the smartphone of another user of the Stream Vision Ballistics application to the riflescope.

5. Select a profile from the riflescope’s memory and upload it to the application’s profile database. If the database already has a profile with the same name, change the name of the profile.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>