ecosmart B11 Wireless Controlled Smart Bulb User Guide
- June 12, 2024
- Ecosmart
Table of Contents
ecosmart B11 Wireless Controlled Smart Bulb
Safety Information
WARNING: Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
WARNING: Not for use in totally enclosed fixtures.
WARNING: For indoor use only. Do not use where directly exposed to water.
WARNING: This device is not intended for use with emergency exits.
CAUTION: Risk of Shock-Turn off power before inspection, installation, or removal. Do not open. There are no user serviceable parts inside.
Wireless Protocol
The Wi-Fi CERTIFIED™ Logo is a registered trademark of Wi-Fi Alliance®.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by The Home Depot is under license. Other
trademarks and trade names are those of their respective owners.
Apple and the Apple logos are trademarks of Apple, Inc., registered in the
U.S., and other countries. App Store is a service mark of Apple Inc.
Google, Google Play and the Google Play logo are trademarks of Google LLC.
| 
---|---
Warranty
FIVE-YEAR LIMITED WARRANTY
Limited Warranty: Guaranteed to last 5 years based on 3 hours use per day, 7
days per week. If this bulb does not last 5 years after date of purchase
(based on 3 hours per day / 7 days per week) due to a defect in materials or
workmanship, please bring the defective bulb and a receipt indicating proof of
purchase to any Home Depot store.
The Home Depot will provide a replacement or, at our discretion, a store
credit for the value of the original purchase price.
This warranty will be voided for misuse of product per the caution statement.
Some states do not allow the exclusion of limitation or consequential damages,
so the above exclusion may not apply to you. This warranty gives you specific
legal rights and you may also have other rights that vary from state to state
and province to province. Please see a store for more details.
FCC Regulation
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: 12B112660WRGB01(1009 881 223)
Responsible Party
Leedarson America, Inc.
300 Technology Court SE Suite 100; Smyrna, GA 30082
1-678-293-8382
FCC ID: 2AB2Q-C806ST-A1GE26
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. Any changes or modifications not
expressly approved by the manufacturer could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: reorient or relocate
the receiving antenna; increase the separation between the equipment and
receiver; connect the equipment into an outlet on a circuit different from
that to which the receiver is connected; consult the dealer or an experienced
radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This
equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body
Pre-Installation
Package Contents
Part
| Description| Quantity
---|---|---
A| B11 LED Bulb|
1
B
| User Guide| 1
C| Quick Start Guide|
1
Bulb Specification
Model
| Input Volts (AC)| Input Frequency (Hz)| Input Watts (W)|
Lumens (LM)| Efficacy (LM/W)| CRI
---|---|---|---|---|---|---
12B112660WRGB01| 120| 60| 5.5| 500| 91|
90
Operation
-
Download the Hubspace™ app from the App Store or the Google Play Store.
| |
---|---|--- -
Sign in, or tap Register to create a Hubspace account.
-
To add your bulb, tap the ‘+’ button in the upper-right corner.
NOTE:
• Bluetooth access is required for product setup.
• Each smart Hubspace bulb must be added individually by scanning the QR code or by following the instructions for manual set up.
• Manual instructions can be found in the app or under step 8 of this product manual.
• Scanning the QR code is the fastest method for set up.
• QR code must be scanned from inside the Hubspace app. -
Scan the QR code printed on either the bulb or Quick Start Guide.
NOTE:
• QR code must be scanned from inside the Hubspace app.
• If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code and follow the instructions.
• If you are unable to access the QR code, on the Scan Product screen, tap the Search button in the lower-right corner and follow the instructions.
• If you cannot locate the QR code or are having trouble scanning the QR code, please follow instructions for manual set up.
• Manual set up instructions are under step 8 of this product manual. -
Connect your bulb to power and follow the instructions on app screen.
NOTE:
• This Hubspace bulb requires a 2.4GHz Wi-Fi network, which most routers provide.
• The Hubspace app will only show Wi-Fi networks compatible with this bulb.
• If you do not see your Wi-Fi network name when you attempt to connect your bulb, please check
your router settings or move your product closer to your Wi-Fi router. -
Control your lighting using the Hubspace app
• Control Dimming: choose the brightness you want in the app.
• Change Colors: Select from shades of white or full color spectrum.
• Group Control: group bulbs so they can be controlled at one time.
-
Set up groups by tapping the “+” sign on the home screen and select “set up group”. Follow the
instructions in the app. -
Groups can also be set up by setting up rooms. Select “rooms” from the home screen and follow the
instructions in the app.
• Create Schedules: program bulbs to turn on and off automatically. -
Select Schedules from the home screen. Follow the steps in the app to create schedules. 7. Set up your Voice Assistant
You can connect your smart bulb to Google Assistant and Alexa from the Hubspace app. Or, you can sign in to Alexa app or Google Assistant and connect to your Hubspace products from there.- Manual Set up
If you cannot locate the QR code or are having trouble scanning the QR code, follow below instructions:
- Manual Set up
NOTE: QR code must be scanned from inside the Hubspace app.
Troubleshooting Guide
| Problem | Solution |
|---|---|
| My Hubspace product is not connecting to Wi-Fi. | Make sure your product is |
connected to a power source. Your internet connection or Wi-Fi network may be
down.
My product cannot find any Wi-Fi networks.| Make sure you have a 2.4GHz
capable Wi-Fi network within range of the product you are trying to add.
My product is in a location that does not have Wi-Fi. Can I still use it with
the Hubspace app?| Yes. Use the app on a phone with an internet connection
like LTE. The phone must be within Bluetooth range of your Hubspace product.
I cannot find the QR code.| It is on the bulb housing. A copy of the QR code
is also included in your product’s documentation.
The QR code has become damaged. How do I add the product?| Under the QR code
are numbers. You can enter those in manually instead of scanning the code.
The QR code will not scan.
| The QR code must be scanned from inside the Hubspace app. If still unable to
scan, please follow instructions for manual set up under step 8 of this
product manual.
I lost my QR code. How do I add a product?| Make sure the product is connected
to power. In the Hubspace app, tap +, then Add Product.
On the Scan Product screen, tap the Search button in the lower-right corner.
Follow the instructions on-screen.
A product is on another account. How do I transfer it?| Scan the QR code and
it will transfer to your account.
My product is ofline for long periods of time.| Make sure your Wi-Fi signal
strength is sufficient. You may need to move your router, use mesh Wi-Fi, or
Wi-Fi extenders.
The product is on and I scanned the QR code, but the app cannot connect to
it.| Turn off Bluetooth on your phone and turn it back on. Then, scan the QR
code. If the problem persists, turn your phone off and on, then try again.
Can I scan the same QR code to add multiple products?| No. Each product has a
unique QR code.
