FIAMMA COMPASS Espresso Coffee Machines Instruction Manual

FIAMMA COMPASS Espresso Coffee Machines

Product Information

The product is called FIAMMASTORE and it is an awning designed for installation on vehicles. It comes in different sizes and colors, including Compass 220 Silver, Compass 260 Silver, Compass 220 Black, and Compass 260 Black. The package includes the awning, installation kits for different vehicle models (4x4S, VW T5/T6, Renault Trafic), and a bag in either silver or black color. The awning dimensions range from 220cm to 260cm in width and from 214cm to 370cm in length. The weight of the awning is 16.5kg.

Product Usage Instructions

1. Before starting the installation, verify the fixing height of the roof cross bars or roof rails of the vehicle. The minimum fixing height should be 200cm and the maximum should be 220cm.
2. If you have the Installation Kit for 4x4S (Item No. 98655-310 – Kit Auto), follow the specific installation instructions provided.
3. If you have the Installation Kit for VW T5/T6 (Item No. 98655Z018), mount the awning on the roof cross bars of the vehicle.
4. If you have the Installation Kit for Renault Trafic (Item No. 98655Z031- 98655Z032), mount the awning on the roof cross bars of the vehicle.
5. Make sure to check for any damages or deformities in the product before installation.
6. If you have any doubts or questions regarding the installation, use, or limitations of the product, contact the dealer or qualified personnel.
7. It is recommended to comply with current local regulations during the installation process.
8. The awnings are to be fixed on the brackets in a way that the words “SUPPORT” on the awning correspond to the brackets.

Note: Detailed installation instructions, specific to each installation kit, can be found in the user manual on page 5.

Package contents

Installation instructions

• Check that nothing has been damaged or deformed during transport.
• In the event of doubts or questions concerning the installation, use or limitations of the product, contact the dealer. We recommend that the installation is carried out by qualifi ed personnel and in compliance with current local regulations

INSTALLATION ON FIXING KIT

• To install the bracket or the adapter, follow the specifi c installation instructions.
• The awnings are to be fi xed on the brackets so that the words “SUPPORT” on the awning correspond to the brackets: this condition is necessary and indispensable for the two brackets situated at the ends (which are located on the fi xing point of the arms on the case-box).
• It is important, but not indispensable, for the central bracket/s as it/they provide/s only a mounting support. The brackets must always be well aligned reciprocally to avoid later problems; in case they are not, they must be properly shimmed using the spacers to ensure the alignment.
• The installation of the awning can occur only when the brackets are perfectly aligned to the roof of the vehicle

Attention: when opening the last 2 arms, close to the support arms bracket, raise the fabric to avoid it gets caught on the screw. (see drawing 7). Repeat the same operation during the closing.

• After unrolling the awning completely, adjust the legs at the chosen height.
• To avoid the awning being lifted up by an unexpected gust of wind, it is necessary to secure the legs to the ground with the provided hoo

Instructions for use

We remind you that the awning is a sun protection, so please close your awning in case of rain, wind or snow. Otherwise, please take the following precautions: lower one side of your awning, so that water can fl ow away and place the tension rafter.

Safety instructions

In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawing.

QR SCAN

• Read the following instructions and warnings carefully; failure to observe these installation and usage instructions as well as the Highway Code in the relevant country may cause severe harm or damage for which the manufacturer declines all responsibility.
• Keep the original packaging to be used in case of return.

Before installation, ensure compatibility with the vehicle on which the product must be installed. Checking that the wall/rear door is sufficiently solid and suitable for guaranteeing the resistance of the anchoring points is always mandatory. If this is not the case, tightness is not guaranteed and it will be necessary to reinforce it.

Before leaving, make sure the awning is correctly closed. A damaged fabric does not allow the awning to perfectly roll in. Never use the awning with a damaged fabric.

Periodically check the fixing condition of the brackets, especially after having travelled the fi rst kilometres from the installation and always before and after long trips, making sure that they have not moved and that the fixing is correct.

The awnings are produced with a high quality standard, but some characteristics of the materials (as little imperfections on paint or linearity of aluminium profiles; minor marks or light strains of plastic parts), which could be interpreted as defects, come from the materials and from the specific work processes, and take place even though Fiamma uses advanced, innovative machinery and production and packaging techniques.

Apart from our strict quality controls, we also have our fabrics continuously checked by independent laboratories to ensure that they are resistant to tear, to the pressure of water and to weather agents, and that their colours are light-fast. To guarantee a perfect quality, the fabrics are waxed or laminated several times.

During this operation, single coloured pigments may move and thus create small bright spots in the material, which are only irregularities that are technically unavoidable, but do not compromise the water proofi ng of the fabric.

MAINTENANCE INSTRUCTIONS

• Make sure that your awning is completely dry and clean before closing it.
• The remaining humidity could cause stains. If, however, you have no choice but closing the awning when it is still wet, make sure to open it for drying within 12 hours maximum. Most dirt is superfi cial and can be removed with water and a clean cloth or soft brush. If the fabric is very dirty, add some neutral detergent (Marseille soap).
• Never use any aggressive chemical and never clean the fabric with a high pressure machine. We recommend not to use the awning at a temperature below 0°C.
• It is recommended not to wash the outer casing of the awning with an aggressive product (or a rough cloth) that could change the surface finishes or materials.
• If the awning is more than 100 mm out of the vehicle shape, the presence of the awning must be recorded in the vehicle’s registration documents (DIN 75303 – 2019).

Accessories

Warranty Fiamma

In case of defects with regards to materials and manufacturing, the customer is entitled to the warranty in accordance with local laws and regulations of the country in which the product was purchased.

QR SCAN

Fiamma S.p.A. – Italy
Via San Rocco, 56 21010 Cardano al Campo (VA) fi amma.com

All rights reserved.
Fiamma S.p.A. reserves the right to modify at any time, without notice, prices, materials, specifications and models or to cease production of any model.

References

• amma.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>