HUSKY LINERS 1419 Husky Floor Liner Instruction Manual
- June 13, 2024
- HUSKY LINERS
Table of Contents
PT #1419
WEATHERBEATER®
FLOOR LINERS
CARE AND USE INSTRUCTIONS
1419 Husky Floor Liner
Thank you for selecting an WeatherBeater™ Floor Liners from Husky Liners Inc.
Your new liner is custom molded to fit your specific vehicle’s floor board.
The liner is made to take the place of your factory floor mats. For correct
fit, it is necessary to remove the factory floor mats before installing your
new floor liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely
tough and durable. The easiest way to clean your liner is with a damp cloth or
sponge and soap and water. Windex® 409®and ArmorAll®type cleaners work as
well.
INSTALLATION INSTRUCTIONS FOR YOUR 3RD SEAT LINER MODELS WITH 2ND ROW BUCKET
SEATING
TO EASE INSTALLATION OF YOUR NEW LINERS, MOVE BOTH SECOND ROW SEATS TO THEIR
MOST FORWARD POSITION. WITH THIS DONE, INSTALL THE LINERS AS SHOWN ABOVE. ONCE
YOU HAVE INSTALLED YOUR LINERS, REPOSITION THE SEATS AS DESIRED.
IF YOUR VEHICLE HAS A CONSOLE BETWEEN THE SECOND ROW OF SEATS, YOUR LINER WILL
NEED TRIMMED TO ALLOW THE CORRECT FIT. PLEASE SEE THE BACK OF THIS PAGE FOR
DETAILS.
TO TRIM YOUR LINER FOR MODELS WITH A CONSOLE BETWEEN THE SECOND ROW SEATS, USE THE MOLDED IN HORIZONTAL TRIM GROOVE AS YOUR TRIMMING GUIDE. A PAIR OF HEAVY SHEARS OR A UTILITY KNIFE WORK WELL FRO TRIMMING. NOT YOU WILL
View the Husky Liner Lifetime Warranty at
www.huskyliners.com/lifetime-warranty
1419_Installation_Instruction
6_7_2022